Traceable® Printing Thermometer, °F/°C
By Control
- Built-in printer provides permanent record with time-and-date-stamp
- Prints time and date for Max only, Min only, average only, and in circularly mode T1, T2 and differential, printing programs in intervals of 3 secs to 23h 59m 59s
- MIN, MAX or average temperature readings may be displayed or cleared at any time with the touch of a key
- Alarm feature may be set in 0.1 increments and will sound when temperature rises above or falls below set point
- Dual probe inputs allow displaying temperature of probe 1, probe 2, or difference (delta) of probe 1 and 2 (accepts Type J, K, T, or E probe), °F/°C switchable
Displays temperatures from –328 to 2431°F and –200 to 1333°C with a resolution of 0.1° and an accuracy of ±1°C from –50 to 982 °C, otherwise ±1.5 °C. Supplied with two fast-response, Type-K beaded sensors with cable length of 4 feet. Display is updated every second.
Multi-point calibration on an individually-numbered Traceable® Certificate which assures accuracy from our ISO/IEC 17025:2005 (1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Supplied with two fast-response, Type-K beaded sensor, Traceable® Certificate, six AAA batteries, two thermal paper rolls (good for approximately 1400 printings per roll), and ABS carrying case. Supplied with paper, carrying case, and six AAA batteries. Accessory adaptor for continuous AC operation is available. Tough ABS plastic case is chemical- and shock-resistant. Unit is 7-1/2 x 3 x 1-1/2 inches. Weight is 10 ounces. Replacement battery Cat. No. 291-1105.