Traceable® Radio-Signal Remote Thermometer
By Control
- Read temperatures from up to 100 feet away
- Ambient sensor and 10-foot-cable probe sensor
- Control up to three remote sensors from one main module
Read temperatures 100 feet away
Total of three modules may be used with the main receiver. The splashproof remote module is supplied with two sensors. Use either the internal one or plug the external one into side of module. External sensor (3/16 inch diameter by 3/4 inch long) and 10-foot cable perform accurately even when both are under water.
Switchable °F/°C range is -58.0 to 158.0°F and -50 to 70.0°C. Resolution is 0.1° and accuracy is ±1°C.
Read up to three modules
Main unit can receive and display data from 3 different remote sensor modules. May be set to channel 1, 2, or 3. Data is transmitted every 30 seconds.
Display's trend indicator shows whether temperature is rising or falling. Minimum and maximum memory display allows monitoring of conditions over short or long periods, including overnight or weekends. An alarm may be set in 1° increments. The alarm sounds when the temperature rises above or falls below the two set points.
Jumbo digits (1-1/8 inches high) may be read from 25 feet. Cases are high-impact, chemical-resistant ABS plastic.
Traceable® to NIST for accuracy
Individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Supplied with one main unit (4-1/4 x 4-1/2 x 5/8 inches, weight 6 oz), one remote sensor module 2-1/3 x 3-1/2 x 3/4 inches, weight 3 oz), internal probe, and external probe/cable. Also supplied with a Traceable® Certificate, flip-open stand, wall bracket, VELCRO™ to attach to any surface, two AA and two AAA alkaline batteries (batteries operate continuously for eight months).