ALDRICH Brand
Displaying 66701-66750 of 103895 results.
| Sigma Cat.No. | Description |
|---|---|
| GF75876418 | Niobium lump, 5 mm max. lump size, weight 200 g, purity 99.9% |
| GF75884158 | Iron foil, 150x150mm, thickness 1.0mm, as rolled, 99.5% |
| GF75892371 | Polymethylmethacrylate (PMMA, ACRYLIC), monofilament, diam. 1 mm, L 2 m, condition optical fiber |
| GF75894968 | Nickel-chromium alloy, Ni80Cr20 1000mm rod, 9.0mm diameter |
| GF75895194 | Nickel-chromium alloy, Ni80Cr20 foil, 100 x 100mm, 0.10mm thickness, as rolled |
| GF75905680 | Iridium wire reel, 1m, diameter 0.1mm, as drawn, 99.9% |
| GF75909336 | Iron foil, 10m coil, thickness 0.125mm, hard, 99.5% |
| GF75912914 | Molybdenum foil, light tested, 50x50mm, thickness 0.008mm, 99.9% |
| GF75917278 | Iron/boron/silicon foil, thickness 0.025 mm, Fe81%/B 13.5%/Si 3.5%/C 2%, length 1 m, coil width 50 mm |
| GF75918099 | Indium wire reel, 2m, diameter 1.5mm, as drawn, 99.999% |
| GF75933793 | Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi foil, 6mm disks, 0.25mm thickness, annealed |
| GF75938653 | Boron nitride sheet, thickness 2.0 mm, size 50 × 50 mm, condition hot-pressed |
| GF75938721 | Polyamide - Nylon 6 (PA 6), rod, diam. 100 mm, L 100 mm |
| GF75940870 | Zinc wire reel, 10m, diameter 0.5mm, as drawn, 99.99+% |
| GF75946102 | Molybdenum wire reel, 200m, diameter 0.30mm, annealed, 99.95% |
| GF75956170 | Silver foil, not light tested, 25x25mm, thickness 0.025mm, as rolled, 99.95+% |
| GF75960502 | Nickel-titanium alloy, Ni60Ti40 powder, 150micron max. particle size, alloy pre-cursor, 20g |
| GF75960782 | Aluminium alloy 5754 rod, Al97%/Mg 3%, 6.35 mm diameter, length 500 mm, condition extruded |
| GF75974923 | Germanium sheet, thickness 0.5 mm, diameter 50.8 mm, purity 99.999% |
| GF75977881 | Polyoxymethylene - Homopolymer (acetal - homopolymer POMH), rod, diam. 50 mm, L 500 mm, white |
| GF75985183 | Copper foil, thickness 0.25 mm, purity 99.9%, diameter 25 mm |
| GF75988906 | Polyphenylenesulfide (PPS), film, thickness 0.1 mm, L 1 m, natural |
| GF75995948 | Magnetic shielding alloy, Ni77Fe14Cu5Mo4 foil, 6mm disks, 0.125mm thickness, annealed |
| GF76008966 | Nickel/Iron rod, Ni52%/Fe48%, 3 mm diameter, length 1000 mm |
| GF76009125 | Alumina nut, size m5, length 25 pcs, style hexagonal |
| GF76009754 | Gold microfoil, disks, 10mm, thinness 0.25μm, specific density 483μg/cm2, permanent mylar 3.5μm support, 99.99+% |
| GF76020375 | Cupric oxide powder, 75 max. part. size (micron), weight 50 g |
| GF76023165 | Niobium nitride powder, 150 max. part. size (micron), weight 100 g, purity 99% |
| GF76025561 | Gold-nickel alloy, Au82Ni18 2m wire, 0.025mm diameter, annealed |
| GF76027675 | Zirconium foil, 25mm disks, thickness 0.016mm, 99.2% |
| GF76043796 | Brass alloy, Cu63Zn37 foil, 15mm disks, 0.075mm thickness, half hard |
| GF76047307 | Tungsten-rhenium alloy, W75Re25 1m wire, 0.25mm diameter, annealed |
| GF76048623 | Silver insulated wire, 50m, conductor diameter 0.025mm, insulation thickness 0.005mm, polyester insulation, 99.99% |
| GF76049051 | Cellulose Acetate (CA), film, thickness 0.035 mm, L 2 m, black |
| GF76049152 | Inconel® 625 - corrosion resistant alloy, Ni61Cr22Mo9Fe5 foil, 8mm disks, 0.2mm thickness, annealed |
| GF76053652 | Tin-antimony alloy, Sn95Sb5 powder, 250micron max. particle size, 50g |
| GF76054530 | Ytterbium rod, 100mm, diameter 10.0mm, cast, 99% |
| GF76056565 | Polystyrene - Conductive (high impact conductive polystyrene), sheet, thickness 2 mm, size 100 × 100 mm, black |
| GF76058679 | Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 6mm disks, 0.02mm thickness |
| GF76058983 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 20m wire, 0.20mm diameter, hard |
| GF76063361 | Aluminum foil, thickness 0.075 mm, diameter 8 mm, purity 99% |
| GF76066498 | Stainless steel - AISI 304L alloy, Fe/Cr18/Ni10 1000mm rod, 8.0mm diameter |
| GF76070886 | Aluminum foil, thickness 0.05 mm, coil width 10 mm, length 2 m |
| GF76078165 | Hafnium foil, 50x50mm, thickness 1.0mm, annealed, 97% |
| GF76091148 | Zinc foil, 15mm disks, thickness 0.125mm, as rolled, 99.95+% |
| GF76092701 | Molybdenum foil, 200x200mm, thickness 0.75mm, annealed, 99.9% |
| GF76099326 | Stainless steel - AISI 304l wire, Fe/Cr18%/Ni10%, 0.6 mm diameter, length 200 m, temper annealed |
| GF76101690 | Nickel foil, 0.5m coil, thickness 1.0mm, annealed, 99.98% |
| GF76103243 | Polyphenylenesulfide - 40% Glass Fiber Reinforced (PPS - 40% GFR), sheet, thickness 6 mm, size 130 × 130 mm, black |
| GF76105133 | Molybdenum foil, 4mm disks, thickness 0.5mm, annealed, 99.9% |