Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)
ALDRICH/655201 - 3.0-4.0% in H2O, high-conductivity grade
Synonym: PEDOT:PSS; Poly(2,3-
MDL Number: MFCD07371079
Product Type: Chemical
This picture is provided solely for illustration purposes. Optical properties of the actual product may deviate. Relevant product information is printed on labeled products and other accompanying or available information material.
This image depicts SKU: 655201-5G
This image depicts SKU: 655201-5G
| concentration | 3.0-4.0% in H2O |
| conductivity | >200 S/cm |
| density | 1.011 g/cm3 (dried coatings) |
| grade | high-conductivity grade |
| greener alternative category | Enabling  , |
| greener alternative product characteristics | Design for Energy Efficiency Learn more about the Principles of Green Chemistry . |
| pH | 1.5-2.5 (25 °C, dried coatings) |
| resistance | 1500 Ω/sq, 4 point probe measurement of dried coating based on initial 6μm wet thickness. |
| 500 Ω/sq, 4 point probe measurement of dried coating based on initial 18μm wet thickness. | |
| storage temp. | 2-8°C |
| sustainability | Greener Alternative Product |
| viscosity | 10-30 cP(20 °C) |
| Application: | Electrical conductivity measurements herewith reported were on a film deposited by spin-coating on a clean glass, then dried (130 °C for 15 minutes on a hotplate). The layer thickness was determined by scratching the layer and measuring the profile/height of the scratch by a stylus profilometer. Electrodes for the measurement were by evaporating metal contacts (four-point probes). |
| Application: | PEDOT:PSS is an intrinsically conductive polymer (ICP) that can be coated on various substrates and nanostructures like fullerenes (C60) to form composites with high electrochemical properties for applications like low-cost printed electronics, optoelectronics, and polymeric solar cells. It can be used as a conductive hydrogel with polyethylene glycol-diacrylate (PEG-DA) for potential applications in tissue engineering. PEDOT:PSS also finds use in other organic electronic applications like organic thin film transistors (OTFTs) and dye sensitized solar cells (DSSCs). |
| Application: | Ready-to-use high conductivity coating formulation. |
| Application: | Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend. |
| General description: | Poly(3,4-ethylenedioxythi |
| General description: | We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here  for more information. |
| Packaging: | 5, 25 g in poly bottle |
| Packaging: | Packaged in poly bottles |
| Symbol |  GHS05 |
| Signal word | Danger |
| Hazard statements | H314 |
| Precautionary statements | P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338 - P363 - P405 |
| Hazard Codes | C |
| Risk Statements | 35 |
| Safety Statements | 26-36/37/39-45 |
| RIDADR | UN 3265 8 / PGIII |
| WGK Germany | WGK 3 |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| Density | 1.011 g/cm3 (dried coatings) |
| Storage Temp. | 2-8°C |
| UNSPSC | 12352103 |