Indium tin oxide coated glass slide, square
ALDRICH/703192 - surface resistivity 8-12 Ω/sq
Synonym: ITO; ITO coated slide, square
CAS Number: 50926-11-9
MDL Number: MFCD00171662
Linear Formula: In2O3 · (SnO2)x
Product Type: Chemical
| density | 1.200 g/cm3 |
| description | slide |
| Substrates and Prefab Devices | |
| InChI | 1S/2In.5O.Sn |
| InChI key | LNNWKAUHKIHCKO-UHFFFAOYSA |
| L × W × thickness | 25 mm × 25 mm × 1.1 mm |
| Quality Level | 100  |
| refractive index | n |
| SMILES string | O=[Sn]=O.O=[In]O[In]=O |
| surface resistivity | 8-12 Ω/sq |
| transmittance | 84% (nominal at 550nm) |
| Application: | ITO glass slides were used as a substrate for fabricating polymer solar cells based on blends of polymeric semiconductors and organic light emitting diodes (OLEDS). ITO substrates can also be used to design transparent heater arrays by etching the surface of the substrate by a printing tool. ITO cover slides may be used for closed digital microfluidic devices and as transparent electrodes in display and other optoelectronic devices.Some other probable uses that has been reported are: • Eumelanin samples prepared on ITO covered glass substrates. • Interface windows of the liquid cell for optical beam deflection (OBD) sensing contains a 20-nm-thick indium tin oxide film. • Mesoporous TiO2 films were formed on ITO conductive glasses. |
| General description: | Indium tin oxide (ITO) is widely used as transparent conducting oxides. Its major characteristics are electrical conductivity, optical transparency and the ease to be deposited as films. |
| General description: | substrate: unpolished float glass, SiO2 passivated (200-300 Å) |
| General description: | Thickness of ITO coating is 1,200-1,600 Å |
| Hazard Codes | Xi |
| Risk Statements | 36/37/38 |
| Safety Statements | 26 |
| RIDADR | NONH for all modes of transport |
| WGK Germany | WGK 3 |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| Density | 1.200 g/cm3 |
| Refractive Index | n |
| UNSPSC | 12352103 |