Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)

ALDRICH/768618 - dry re-dispersible pellets

Synonym: Orgacon^™ DRY; PEDOT:PSS; Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)

MDL Number: MFCD07371079
Product Type: Chemical

Catalog Number	PKG Qty.	Price


45-768618-1G	1 g	$63.20 1/EA	Add To Favorites
45-768618-5G	5 g	$350.00 1/EA	Add To Favorites

This picture is provided solely for illustration purposes. Optical properties of the actual product may deviate. Relevant product information is printed on labeled products and other accompanying or available information material. This image depicts SKU: 768618-5G

Properties
Descriptions
Safety Info.
Basic Data

description	Electrodes
form	dry re-dispersible pellets
mp	>300 °C
Quality Level	100
resistance	200-450 Ω/sq

Application:	Orgacon DRY is specifically useful for water sensitive formulations containing UV curable monomer (suitable with small amount of water) and pre-polymer based formulations. Orgacon DRY pellets can be re-dispersed in organic solvents such as ethanol. The resulting dispersion can be used in coating - or ink - formulations targeted for different applications. Allow retention of PEDOT/PSS key properties in polar organic solvents; such as Ethanol; Surface Resistance: 200~450 Ohm/square; Visual Light Transmission: ~85%
Application:	PEDOT:PSS can be used as a conductive material with a high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic printable electronics, textile electronics, electrochemical storage and supercapacitors, and lithium ion batteries.
Application:	Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.
General description:	• Active chemical PEDOT/PSS • Visual appearance blue-grey pellets • Water content max. 15 % under 50% RH; 22°C • Shelf life 24 month in storage conditions
General description:	A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
General description:	Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer (CP) that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It is a low cost CP that is produced with physical appearance (for example dispersible pellets). The following are the properties that make PEDOT:PSS a viable polymer in organic electronics: • good optical properties • high conductivity • functionalization of nanomaterials • high thermal stability • easy processing
Legal Information:	Orgacon is a trademark of Agfa-Gevaert N.V.
Legal Information:	Product of Agfa-Gevaert N.V.
Packaging:	1, 5 g in glass bottle
Preparation Note:	When spin-coated using S300 EtOH (contains less than 3.5% wt. H20) as the solvent; the Visual Light Transmission (VLT) according to ASTM D 1003 (excludes substrate) is 85%; and the Surface Resistance is 450 Ohm/square.

Symbol	GHS05
Signal word	Danger
Hazard statements	H318
Precautionary statements	P280 - P305 + P351 + P338
Hazard Codes	Xi
Risk Statements	41
Safety Statements	26-36
RIDADR	NONH for all modes of transport
WGK Germany	WGK 3
Flash Point(F)	Not applicable
Flash Point(C)	Not applicable

mp	>300 °C
UNSPSC	12352103

To Order From a Quote