Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)
ALDRICH/900181 - high-conductivity grade
Synonym: 1% Pedot/PSS; Orgacon™ S315; Poly(2,3-
Product Type: Chemical
| concentration | 0.5-1 wt. % (PEDOT: PSS in water) |
| description | Electrodes |
| Visual Light Transmission (VLT): ≥ 80% | |
| form | dispersion |
| greener alternative category |  , Enabling |
| greener alternative product characteristics | Design for Energy Efficiency Learn more about the Principles of Green Chemistry . |
| pH | 2-3.5 |
| Quality Level | 100 |
| sheet resistance | <200 Ω/sq (coating : 40μ wet, drying: 6 min 130°C) |
| SMILES string | CC1=C2OCCOC2=C(C)S1.CCC(C |
| storage temp. | 2-8°C |
| sustainability | Greener Alternative Product |
| viscosity | ≤70 mPa.s(20 °C) |
| Application: | Orgacon™ S315 is ready-to-use and made with conductive polymer PEDOT:PSS. Typical application processes are slot die, Meyer bar and gravure coating. It is particularly designed for optimal properties on PET and meet the requirements of several transparent electrodes applications as alternative to ITO. • ITO substitution coating. • ITO-free OPV. • Surface electrical resistance (SER) at 90% VLT* (visual light transmission): 125 Ω/square. *Typical properties on PET with bar coater. Thermal cured at 130 °C/ 6 min. VLT according to ASTM D 1003, excludes substrate. • Stability ratio R/R_0 (500 hr at 60 °C, 95% RH) : 1.3. |
| Application: | PEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), dye sensitized solar cells (DSSCs), organic light emitting diodes (OLEDs), supercapacitors and biomedical sensors. |
| Application: | PEDOT:PSS is widely used as a transparent and conductive coating in applications like touchscreens, flat panel displays, and photovoltaic devices. It is commonly used as an electrode material in OPVs. It serves as the hole transport layer and a transparent anode, enabling efficient charge extraction and transport within the device. |
| General description: | High-conductivity grade. |
| General description: | Poly(3,4-ethylenedioxythi • low band gap • good optical properties • high conductivity • low redox potential • easy processing • tunable film forming ability |
| General description: | We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here  for more information. |
| Legal Information: | Orgacon is a trademark of Agfa-Gevaert N.V. |
| Other Notes: | • These additives have low water content (less than 100 ppm). • Please handle under inert and moisture free environment (glove box). • Keep containers tightly closed. • Keep away from heat and ignition sources. • Store in a cool and dry place. • Avoid storing together with oxidizers. |
| Packaging: | 100 g in Sure/Seal™ |
| Preparation Note: | • Dilute with DI water or compatible solvent if needed. • Pre-treated substrate with corona- or plasma treatment increase adhesion. |
| Symbol |  GHS07 |
| Signal word | Warning |
| Hazard statements | H315 - H319 |
| Precautionary statements | P264 - P280 - P302 + P352 - P305 + P351 + P338 - P332 + P313 - P337 + P313 |
| RIDADR | NONH for all modes of transport |
| WGK Germany | WGK 2 |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| Storage Temp. | 2-8°C |
| UNSPSC | 12162002 |