Zinc oxide ink for inkjet printing
ALDRICH/901091
Synonym: Helios′Ink H-SZ01034 semiconductive ink; Zinc oxide dispersion; Zinc oxide suspension; ZnO ink; ZnO nanoparticle ink
Linear Formula: ZnO
Product Type: Chemical
This image is provided for informative purposes only and does not represent an actual product label. It should not be used as a substitute for official product labeling.
| capacity | ≥0.9 % loading (Nanoparticles loading) |
| color | slightly yellow to clear |
| description | Conductivity: 10-8-10-7 S/cm (before illumination) and 10-4-10-3 S/cm (under illumination with UV light) |
| Valence band: 7.9 ± 0.1 eV | |
| Work function: 4.0 ± 0.1 eV | |
| form | liquid (dispersion) |
| greener alternative category | Enabling  , |
| greener alternative product characteristics | Design for Energy Efficiency Learn more about the Principles of Green Chemistry . |
| Quality Level | 100 |
| surface tension | 29 mN/m±5 mN/m |
| sustainability | Greener Alternative Product |
| viscosity | 10.5 mPa.s±3.0 mPa.s(20 ° |
| Features and Benefits: | Product benefits: • Easy deposition under atmospheric conditions (temperature and pressure). • Good optical performances (visible light transmission >90%). • Non CMR ink. • Compatible with ITO layer and Ag NWs layer. • Compatible with most flexible substrates. • Low drying temperature making printing onto flexible substrates possible. • Thin layers are obtained (20 nm) with low roughness (RMS = 3±1 nm). |
| General description: | Helios’Ink H-SZ01034, semi conductive ink developed for the printed electronics is particularly well suited for OPV and PV. Helios’Ink H-SZ01034, semi conductive ink shows great performance on Drop on Demand (DOD) inkjet printers, blade coating, and spin coating and is compatible with various flexible substrates (polyimide, PET, PET/ITO, etc.) but also Glass/ITO. |
| General description: | We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Click here for more information. |
| Legal Information: | Product of Genes′Ink. |
| Preparation Note: | Typical processing guideline: • Can be homogenized for 5 minutes in an ultrasonic bath in order to get rid of any aggregates. • Filtration on a 0.45 μm PTFE filter syringe to avoid any nozzles clogging. • Drying conditions: Oven, IR oven, vacuum oven. • Clean-up solution: Ethanol/Acetone. |
| Symbol |    GHS02,GHS05,GHS07 |
| Signal word | Danger |
| Hazard statements | H226 - H302 - H315 - H318 - H335 - H336 - H412 |
| Precautionary statements | P210 - P273 - P280 - P301 + P312 - P303 + P361 + P353 - P305 + P351 + P338 |
| WGK Germany | WGK 1 |
| Flash Point(F) | 111.2 °F - closed cup |
| Flash Point(C) | 44 °C - closed cup |
| UNSPSC | 12352303 |