Synthware™ solvent still head
ALDRICH/SYNS134250 - 250 mL, joint: ST/NS 24/40, side joint: ST/NS 14/10, side joint: 14/20
Product Type: Equipment/Book
| capacity | 250 mL |
| joint | joint: ST/NS24/40 |
| side joint: 14/20 | |
| side joint: ST/NS14/10 | |
| manufacturer/tradename | Synthware S134250 |
| packaging | pkg of 1 ea |
| General description: | For great solvent/chemical resistance, the two 0-4 mm high vacuum valves have PTFE covers over the two Viton® O-ring on the shaft and one integral PTFE O-rings on the tip, without exposing any material other than PTFE to any solvents. Syringe port has a 4mm PTFE stopcock and a 14/20 outer joint. Delivery port has 14/20 inner joint. |
| General description: | Grease-free design. Same as SYN264250 with 14/10 threaded joint and PTFE-lined septum for syringe access. |
| General description: | Similar to SYN134250 but with drip tip on the delivery port other than 14/20 inner joint. With 4mm straight bore stopcock in the upper portion for easy syringe needle access. |
| General description: | Syringe port has 14/20 outer joint for a rubber septum and a 4 mm PTFE stopcock. Solvent is drained through 2 mm T-bore PTFE stopcock. The drainage arm has a 14/20 inner joint. |
| General description: | Upper sampling port has a 4mm PTFE stopcock with a 14/20 outer joint for use with septa. Lower drain is centered to allow total drainage of storage head. |
| Legal Information: | Synthware is a trademark of Kemtech America Inc. |
| Legal Information: | Viton is a registered trademark of E. I. du Pont de Nemours and Company |
| UNSPSC | 41104812 |