Flexmark 8 TPU flexible 3D printing filament
ALDRICH/TRD3D0044 - signal white, diam. 1.75 mm
Product Type: Chemical
diam. | 1.75 mm |
greener alternative category | Enabling ![]() |
greener alternative product characteristics | Design for Energy Efficiency Learn more about the Principles of Green Chemistry ![]() |
weight | 500 geach |
Application: | Flexmark 8 TPU 3D Printing Parameters • Extruder (nozzle) temperature: 225 +/-10 °C • Bed temperature: cold to 45 °C • Print speed: 20-30 mm/s • Fan: 0-50 % • Minimum nozzle diameter: 0.3 mm • Plate materials: glass, blue tape, kapton tape, etc. |
General description: | TPU Flexible 3D Printing Filament • TPUs are highly resistant to chemical agents, wear-proof and have good elastic comeback. • Flexmark 7 = 70 Shore A, the most flexible, but it requires a precise calibration of the printer. • Flexmark 8 = 80 Shore A, a good mixture of flexibility and stiffness and easier to print. • Flexmark 9 = 90 Shore A, the stiffest of all the Flexs and lets you print as usual. Material Properties • Density: 1.22 g/cm3 • Hardness: 81 sh/A • Elongation at break: 750% • Tensile strain: 50 MPa • Compression set at 70 °C: 35% • Charpy Impact at 23 °C: No break • Charpy Impact at -30 °C: No break • Abrasion loss: 40 mm3 |
WGK Germany | WGK 3 |
Flash Point(F) | Not applicable |
Flash Point(C) | Not applicable |
UNSPSC | 12352203 |