Tenax PC-ABS 3D Printing Filament
ALDRICH/TRD3D0061 - black hole, diam. 1.75 mm
Product Type: Chemical
This image is provided for informative purposes only and does not represent an actual product label. It should not be used as a substitute for official product labeling.
| diam. | 1.75 mm |
| greener alternative category | Enabling  , |
| greener alternative product characteristics | Design for Energy Efficiency Learn more about the Principles of Green Chemistry . |
| sustainability | Greener Alternative Product |
| weight | 500 geach |
| Application: | Tenax PC-ABS 3D Printing Parameters • Extruder (nozzle) temperature: 250 +/- 10 °C • Bed temperature: 100 +/- 10 °C • Print speed: 50-60 mm/s • Fan: 0-20 % • Minimum nozzle diameter: 0.4 mm • Plate materials: blue tape, kapton tape, etc. |
| Application: | This product can be used in material extrusion 3D printing technique. |
| General description: | Tenax PC-ABS 3D Printing Filament: • Odourless composition and low warping • Very high mechanical strenghth and toughness • Obtain a shiny finish • Certified for automotive Material Properties • Density: 1.1 g/cm3 • Water absorption: 0.9% • Tensile modulus: 2000 MPa • Tensile stress: 43 MPa • Tensile strain at break: 90% • Vicat point: 108°C • Heat deflection: 93°C • Charpy notched impact at 23°C: 50 kJ/m2 • Charpy notched impact at -30°C: 50 kJ/m2 |
| General description: | We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Tenax PC-ABS printing filament has high mechanical strength and toughness with odourless composition and low wrapping. Click here  for more information. |
| WGK Germany | WGK 3 |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| UNSPSC | 12352203 |