DarkStone architectural 3D printing filament
ALDRICH/TRD3D0065 - stone effect, diam. 1.75 mm
Product Type: Chemical
diam. | 1.75 mm |
greener alternative category | Enabling |
greener alternative product characteristics | Waste Prevention Design for Energy Efficiency Learn more about the Principles of Green Chemistry . |
weight | 750 geach |
Application: | DarkStone 3D Printing Parameters • Extruder (nozzle) temperature: 230 +/- 10 °C • Bed temperature: 100 +/- 10 °C • Print speed: 60-70 mm/s • Fan: 0-20 % • Minimum nozzle diameter: 0.35 mm • Plate materials: blue tape, kapton tape, etc. |
General description: | DarkStone architectural 3D printing filament • Developed specifically for architecture, design and archeological fields. • Polymers are mixed with stone powders to realize architectural objects with ease. • Stone-finish your objects with exceptional tactile feeling. • Polish your objects with fine sandpaper and water. No more support-removing problems. Material Properties • Water absorption: 0.2% • Tensile modulus: 2500 GPa • Vicat softening temperature: 102 °C • Charpy impact at 23°C: 8 ft·lb/in2 • Charpy impact at -30°C: 3 ft·lb/in2 • MFR: 4g/10 min |
WGK Germany | WGK 3 |
Flash Point(F) | Not applicable |
Flash Point(C) | Not applicable |
UNSPSC | 12352203 |