Ace pressure tubes with plunger valves and thermowells
ALDRICH/Z400440 - capacity ~38 mL
Product Type: Equipment/Book
| binding type | non-treated surface |
| capacity | 38 mL |
| ~38 mL | |
| diam. | 25.4 mm |
| feature | internal thread |
| graduations: no | |
| L × O.D. | 20.3 cm × 25.4 mm |
| manufacturer/tradename | Ace Glass 8648-170 |
| material | borosilicate glass tube |
| cap (Front-Seal Plunger Valve) | |
| clear tube | |
| glass | |
| PTFE cap | |
| round bottom | |
| screw top cap (plugseal) | |
| white cap | |
| packaging | pack of 1 ea |
| sterility | non-sterile |
| General description: | Glass plunger valve has a 5 mm I.D. thermowell for a thermocouple wire or sheathed probe up to 1/8 in. (3.2 mm) diam. Overall length of plunger valve is 190 mm. The thermowell length is 70 mm. Plunger has a hole on the side that, when positioned in relation to the O-ring seal, allows tube to be open or closed to the atmosphere (i.e. pull to close, push to open). Complete item consists of tube with #15 Ace-Thred, PTFE bushing with FETFE® O-ring, and plunger valve with thermowell. Replacement FETFE O-rings: Ace-Thred # Front Seal Back Seal 7 Z504661 Z504742 15 Z504858 Z505021 25 Z505056 Z505110 CAUTION: This glassware is not guaranteed against breakage caused by pressure or vacuum. These tubes should never be used if scratched or otherwise damaged. |
| Legal Information: | FETFE is a registered trademark of Ace Glass, Inc. |
| UNSPSC | 41121800 |