Ace pressure filter reactor system
ALDRICH/Z564117 - Jacketed, capacity 1 L
Product Type: Equipment/Book
body I.D. × D | 100 mm × 180 mm |
capacity | 1 L |
fitting | Ace-Thred |
flange I.D. | 100 mm |
parameter | 35 psi pressure (at 100°C) |
General description: | Rugged heavy-wall reactors with a Schott flange with shallow O-ring groove at the top for connection to a jointed head with quick-release clamp. These complete bench top systems include all components required for operation except an IKA® stirrer motor, model RW 20.n, which is recommended for all reactor sizes. See the stirrer section for a listing of these products. Choice of two models: Pressure filter reactor - rated 35 psig @ 100°C, Ace Threds allow use of vacuum or pressure to drain liquid from reactor, 2 x #15 and 1 x #7 AceThreds on 60 mm head, 3 x #15 and 1 x #7 Ace Threds on 100 mm head Jacketed pressure filter reactor - as above with jacket for heating or cooling reaction Applications: • Oxidation/reduction reactions where the particulate can be drawn down to a filter cake • Nanotechnology where the material must be contained and the filtrate is the actual product or nano-particle needed • Simple Bioreactor as gases can be introduced through pressure head via a pressure or NPT fittings and tubing • Paints/pigments other viscous solutions Both systems include: • Heavy-wall glass reactor body and head, CAPFE O-ring and SS quick-release clamp • Ace Thred PTFE bottom filter adapter, o-ring, and filter support, PTFE thread adapter, o-ring and PTFE bottom valve. Dead space below frit is 4.5-5 mL liquid w/ water viscosity +/- 0.5 mL • Non-flaking stir shaft bearing • Glass stir shaft with PTFE agitator assembly • Addition funnel • West condenser • Support package including holed plate, stand, chain clamp, and holder • PTFE stoppers • Chuck adapter for IKA stirrer motor |
General description: | Take replacement CAPFE O-ring, Ace 7855-880. |
Legal Information: | IKA is a registered trademark of IKA-Werke GmbH & Co. KG |
UNSPSC | 41103817 |