Ace pressure tube
ALDRICH/Z564591 - bushing type, Front seal, capacity ~18 mL, L × O.D. 17.8 cm × 19 mm
Product Type: Equipment/Book
Front Seal shown
Left to Right: Back Seal, Front Seal
| binding type | non-treated surface |
| capacity | ~18 mL |
| diam. | 19 mm |
| feature | internal thread |
| bushing type Front seal | |
| graduations: no | |
| fitting | Ace-Thred for #7 |
| L × O.D. | 17.8 cm × 19 mm |
| manufacturer/tradename | Ace Glass 8648-34 |
| material | borosilicate glass tube |
| colorless tube | |
| PTFE cap | |
| round bottom | |
| screw top cap (plugseal) | |
| white cap | |
| sterility | non-sterile |
| General description: | Heavy-wall borosilicate glass tubes are pressure rated to 150 psig. Useful for the polymerization and analysis of halogens by thermal decomposition in the presence of lime. Tubes are supplied complete with Ace-Thred PTFE bushing and FETFE® O-ring. For pressure work, the "Front seal" bushing is recommended (allows O-ring to sit at narrow neck of tube, below the threads). "Back seal" bushing can also be used, if preferred (allows O-ring to sit on top of the tube against cap). Replacement FETFE O-rings: Front Seal: Z504661 (Ace-Thred #7) Z504858 (Ace-Thred #15) Z505056 (Ace-Thred #25) Back Seal: Z504742 (Ace-Thred #7) Z505021 (Ace-Thred #15) Z505110 (Ace-Thred #25) CAUTION: This glassware is not guaranteed against breakage caused by pressure or vacuum. These tubes should never be used if scratched or otherwise damaged. |
| Legal Information: | FETFE is a registered trademark of Ace Glass, Inc. |
| UNSPSC | 41121800 |