Mini LabRoller™ rotator
ALDRICH/Z674583 - AC/DC input 110 V AC
Product Type: Equipment/Book
availability | not available in EU |
feature | CSA approved |
manufacturer/tradename | Labnet H5500 |
parameter | 24 rpm speed |
W × D × H | 8.4 in. (21.3 cm) × 4 in. (10.2 cm) × 5 in. (12.6 cm) |
General description: | Simple, yet versatile, the Mini LabRoller Rotator is designed for mixing samples in both a horizontal and vertical plane. The Mini LabRoller Rotator is supplied with a rotisserie for 36 x 1.5 or 2.0 mL tubes. Two additional rotisseries are available separately. • Compact design conserves valuable bench • Simple construction allows for easy cleaning and decontamination • Wide selection of motions from gentle rolling, tumbling, to end over end mixing • Cold room and incubator compatible • Three easily interchangeable rotisseries to hold various size tubes and plates • Operating conditions: +4 °C - 65 °C, up to 85% RRH non-condensing When a rotisserie is inserted horizontally (tubes held vertically), an end over end motion is produced. The unit can then be used for simple rotating, or rested on either end to create a tumbling motion. Placing the Mini LabRoller on the end with the power switch will create a more vigorous tumbling motion than resting it on the opposite end. A rocking motion is achieved by simply inserting pegs to limit the movement of the rotisserie to 20°, 45°, or 60°. Any of the three available rotisseries can be used as a rocking platform. Using the supplied rod, the rotisseries may be mounted vertically (tubes held horizontally). In all configurations, the speed of the rotisserie is fixed at 24 rpm. |
Legal Information: | Mini LabRoller is a trademark of Labnet Intl., Inc. |
UNSPSC | 41103811 |