Advanced Search

ALDRICH Brand

Displaying 50851-50900 of 67453 results.
Sigma Cat.No.Description
GF94701450Waspaloy - heat resisting alloy, Ni58Cr19Co14MoTiAlFe
foil, 50 x 50mm, 0.025mm thickness, as rolled, light tight (lt)
GF94703283Manganin® - resistance alloy, Cu86Mn12Ni2
foil, 2m coil, 0.04mm thickness, annealed
GF94704510Nickel
insulated wire, length 20 m, conductor diameter 0.125 mm, insulation thickness 0.005 mm
GF94704644Indium
foil, 6mm disks, thickness 0.25mm, as rolled, 100%
GF94706354Aluminum
mesh, 150x150mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh
GF94714511Stainless Steel - 17-7PH alloy, FeCr17Ni7
foil, 100 x 100mm, 0.125mm thickness, annealed - condition a, precipitation hardenable
GF94715736Tantalum/Tungsten
foil, Ta97.5%/W 2.5%, thickness 1.0 mm, size 100 × 100 mm, temper as rolled
GF94718199Molybdenum
rod, 200mm, diameter 5.0mm, centerless ground, 99.9%
GF94720967Copper-beryllium alloy, Cu98Be2
foil, 25mm disks, 0.02mm thickness, half hard
GF94727526Tin
foil, 50mm disks, thickness 0.075mm, as rolled, 98.8%
GF94728426Copper
foil, thickness 0.3 mm, size 150 × 150 mm, purity 99.9%
GF94745807Platinum-iridium alloy, Pt80Ir20
5m wire, 0.015mm diameter, stress relieved
GF94753064Copper-beryllium alloy, Cu98Be2
foil, 15mm disks, 0.15mm thickness, half hard
GF94754100Molybdenum
wire reel, 10m, diameter 0.5mm, annealed, 99.95%
GF94758991Palladium
foil, light tested, 50x50mm, thickness 0.047mm, as rolled, 99.95%
GF94760680Polytetrafluoroethylene
(PTFE), tube, outside diameter 4.2mm, L 1000 mm, wall thickness 0.05 mm
GF94761940Phosphor bronze alloy, Cu94Sn6
20m insulated wire, 0.25mm conductor diameter, 0.018mm insulation thickness, polyimide insulation
GF94765865Nickel-beryllium-titanium alloy, Ni97.5Be1.95Ti0.5
foil, 100 x 100mm, 0.2mm thickness
GF94766619Aluminum alloy 6082, Al97.4Si1Mg0.9Mn0.7
foil, thickness 1.0 mm, Al97.4%/Si 1%/Mg 0.9%/Mn 0.7%, size 300 × 300 mm, temper t6
GF94769083Silicone Elastomer, Sheet, Thickness 1.0Mm, Size 300X300 Mm, 1 Piece
silicone elastomer, sheet, thickness 1 mm, size 300 × 300 mm
GF94778106Zirconium
rod, 10.0 mm diameter, length 500 mm, purity 99.2%
GF94780424Brass alloy, Cu63Zn37
foil, 1m coil, 0.005mm thickness, as rolled
GF94795701Polystyrene
(PS), film, thickness 0.19 mm, size 150 × 150 mm, clear clear
GF94801002Gold
foil, thickness 0.250 mm, size 12.5 × 12.5 mm, high purity 99.99%
GF94801024Nickel-chromium alloy, Ni80Cr20
0.5m wire, 1.0mm diameter, hard
GF94802520Phosphor bronze alloy, Cu94Sn6
50m wire, 0.025mm diameter, hard
GF94804779Copper - O.F.H.C.
foil, 50mm disks, thickness 0.25mm, half hard, 99.95+%
GF94807176Polyvinylchloride - Unplasticized
(UPVC), sheet, thickness 4.5 mm, size 150 × 150 mm, clear
GF94809842Polysulfone
(PSU), film, thickness 0.025 mm, L 2 m
GF94809853Molybdenum
wire reel, 20m, diameter 0.025mm, gold plated, 99.95%
GF94810990Polyimide
(PI), tube, outside diameter 0.35mm, L 200 mm, wall thickness 0.025 mm
GF94811092Stainless steel - AISI 316l
tube, Fe/Cr18%/Ni10%/Mo 3%, outside diameter 2.1 mm, length 200 mm, wall thickness 0.25 mm
GF94814219Niobium
foil, thickness 0.1 mm, length 1 m, purity 99.9%
GF94822904Niobium
foil, thickness 1.5 mm, size 50 × 50 mm, purity 99.9%
GF94832208Copper
tube, 1000mm, outside diameter 1.0mm, inside diameter 0.24mm, wall thickness 0.38mm, as drawn, 99.9%
GF94833771Copper
foil, thickness 0.1 mm, length 20 m, coil width 25.4 mm
GF94835784Stainless Steel - AISI 304 alloy, FeCr18Ni10
1000mm tube, 2.95mm outside diameter, 0.325mm wall thickness, 2.3mm inside diameter, hard
GF94835885Hafnium
wire reel, 0.2m, diameter 0.125mm, as drawn, 97%
GF94847721Phosphor bronze alloy, Cu94Sn6
foil, 50 x 50mm, 0.076mm thickness, as rolled, light tight (lt)
GF94848597Polyetheretherketone
(PEEK), sheet, thickness 6.5 mm, size 150 × 150 mm, gray
GF94852873Silver
lump, 3 mm max. lump size, weight 10 g, high purity 99.999%
GF94854099Molybdenum
foil, 4mm disks, thickness 0.125mm, annealed, 99.9%
GF94854707Iron
foil, 8mm disks, thickness 0.125mm, hard, 99.5%
GF94854853Aluminum
foil, thickness 0.10 mm, length 0.5 m, purity 99.5%
GF94861840Magnesium
foil, thickness 0.02 mm, size 100 × 100 mm, purity 99.9%
GF94868117Tungsten
wire reel, 100m, diameter 0.3mm, clean, 99.95%
GF94873900Copper
foil, thickness 0.125 mm, purity 99.9%, diameter 15 mm
GF94874989Polymethylmethacrylate
(PMMA, ACRYLIC), sheet, thickness 0.175 mm, size 600 × 600 mm, condition impact modified
GF94876307Aluminum-silicon alloy, Al99Si1
25m wire, 0.025mm diameter, hard
GF94877982Molybdenum
foil, 50x50mm, thickness 0.30mm, annealed, 99.9%

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top