ALDRICH Brand
Displaying 69101-69150 of 103895 results.
| Sigma Cat.No. | Description |
|---|---|
| GF84340908 | Copper - O.F.H.C. foil, 150x150mm, thickness 1.0mm, half hard, 99.95+% |
| GF84343596 | Iron foil, light tested, 50x50mm, thickness 0.025mm, as rolled, 99.99+% |
| GF84346612 | Molybdenum foil, thickness 0.01 mm, size 150 × 150 mm, purity 99.9% |
| GF84350921 | Gold-germanium eutectic alloy, Au88Ge12 foil, 2m coil, 1mm coil width, 0.025mm thickness |
| GF84354510 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 2m coil, 0.025mm thickness, annealed |
| GF84360630 | Stainless Steel - AISI 430 alloy, Fe81Cr17MnSiCSP foil, 200 x 200mm, 2.0mm thickness, annealed |
| GF84365545 | Brass alloy, Cu63Zn37 foil, 50mm disks, 0.075mm thickness, half hard |
| GF84367053 | Vanadium foil, thickness 0.001 mm, size 25 × 25 mm, purity 99.8% |
| GF84367301 | Indium foil, 15mm disks, thickness 0.5mm, as rolled, 100% |
| GF84371957 | Lead foil, 8mm disks, thickness 0.009mm, 99.99+% |
| GF84372521 | Copper tube, 200mm, outside diameter 12.7mm, inside diameter 10.26mm, wall thickness 1.22mm, as drawn, 99.9% |
| GF84378426 | Zirconium foil, 25mm disks, thickness 0.009mm, 99.2% |
| GF84397168 | Chromium foil, not light tested, 25x25mm, thickness 0.025mm, permanent polyester support, 99.99+% |
| GF84398057 | Neodymium foil, thickness 0.1 mm, size 50 × 50 mm, purity 99% |
| GF84398293 | Polymethylmethacrylate (PMMA, ACRYLIC), sheet, thickness 2 mm, size 150 × 150 mm |
| GF84401423 | Aluminum foil, thickness 1.5 mm, size 200 × 200 mm, purity 99% |
| GF84406585 | Brass alloy, Cu63Zn37 900mm tube, 0.61mm outside diameter, 0.18mm wall thickness, 0.25mm inside diameter, as drawn |
| GF84412762 | Zirconium rod, 500mm, diameter 6.0mm, centerless ground, 99.2% |
| GF84420468 | Polyamide - Nylon 4, 6 (PA 4,6), sheet, thickness 10 mm, size 300 × 300 mm |
| GF84421076 | Boron nitride sheet, thickness 2.0 mm, size 100 × 100 mm, condition hot-pressed |
| GF84427634 | Constantan - resistance alloy, Cu55Ni45 foil, 15mm disks, 0.01mm thickness, as rolled |
| GF84433642 | Niobium wire reel, 1m, diameter 0.5mm, annealed, 99.9% |
| GF84446691 | Copper foil, thickness 0.0125 mm, size 50 × 50 mm, purity 99.9% |
| GF84451888 | Polyphenyleneoxide (PPO ), (ppo (modified), ppe (modified)), rod, diam. 12 mm, L 500 mm, pale gray |
| GF84453701 | Polyphenylenesulfide (PPS), film, thickness 0.4 mm, size 400 × 400 mm, natural |
| GF84453712 | Glass Sealing Alloy, Fe54Ni29Co17 foil, 6mm disks, 0.05mm thickness, annealed, flattened |
| GF84460642 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 4mm disks, 0.1mm thickness, annealed |
| GF84464602 | Molybdenum tube, 100mm, outside diameter 6.0mm, inside diameter 4.4mm, wall thickness 0.8mm, 99.9% |
| GF84467470 | Iron foil, 8mm disks, thickness 0.006mm, 99.85% |
| GF84471723 | Palladium wire reel, 1m, diameter 0.5mm, as drawn, 99.95% |
| GF84472623 | Aluminum-magnesium alloy, Al97Mg3 foil, 25 x 25mm, 0.06mm thickness, as rolled, light tight (lt) |
| GF84474399 | Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 50 x 50mm, 0.75mm thickness, annealed |
| GF84478348 | Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 50mm disks, 0.15mm thickness, annealed |
| GF84478382 | Manganin® - resistance alloy, Cu86Mn12Ni2 1m wire, 1.0mm diameter, annealed |
| GF84478887 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 100 x 100mm, 0.5mm thickness, titanium nitride coating 2-3 microns |
| GF84480497 | Glass Sealing Alloy, Fe54Ni29Co17 foil, 6mm disks, 0.125mm thickness, annealed |
| GF84482387 | Tantalum foil, 50x50mm, thickness 0.25mm, annealed, 99.9% |
| GF84482927 | Waspaloy - heat resisting alloy, Ni58Cr19Co14MoTiAlFe foil, 4mm disks, 0.025mm thickness, as rolled |
| GF84487674 | Boron microfoil, disks, 10mm, thinness 0.1μm, specific density 23.5μg/cm2, permanent mylar 3.5μm support, 99.6% |
| GF84487775 | Tungsten foil, 5m coil, thickness 0.035mm, coil width .75mm, as rolled, 99.95% |
| GF84488462 | Copper insulated wire, 5m, conductor diameter 0.5mm, insulation thickness 0.06mm, polyimide insulation |
| GF84489418 | Ethylene- (ETFE), film, thickness 0.025 mm, size 150 × 150 mm |
| GF84490421 | Stainless steel - 17-4ph rod, Fe/Cr17%/Ni 4%, 8.0 mm diameter, length 500 mm |
| GF84490847 | Boron carbide granule, 5 mm nominal granule size, weight 100 g |
| GF84493996 | Tin foil, thickness 0.005 mm, diameter 8 mm, purity 99.95% |
| GF84497125 | Copper - O.F.H.C. foil, 150x150mm, thickness, 0.5mm, half hard, flattened, 99.95+% |
| GF84510907 | Gold wire, length 10 m, 0.05 mm diameter, purity 99.99+% |
| GF84514507 | Copper foil, thickness 0.01 mm, size 95 × 100 mm, high purity 99.99+% |
| GF84515687 | Nickel tube, 500mm, outside diameter 1.8mm, inside diameter 1.6mm, wall thickness 0.1mm, hard, 99.5% |
| GF84518006 | Nickel foil, 50mm disks, thickness 0.05mm, annealed, 99.98% |