Advanced Search

ALDRICH Brand

Displaying 70001-70050 of 103895 results.
Sigma Cat.No.Description
GF87546864Aluminum
foil, thickness 0.050 mm, diameter 50 mm, purity 99%
GF87549159Polyamide - Nylon 6
(PA 6), film, thickness 0.025 mm, L 10 m, colorless
GF87552007Alumina
crucible, cylindrical, length 5 pcs, outside diameter 39mm
GF87554087Copper
foil, thickness 1.6 mm, size 150 × 150 mm, high purity 99.99+%
GF87556696Gold
foil, thickness 0.009 mm, diameter 4 mm, purity 99.9%
GF87559420Aluminum
tube, 0.5m coil, as drawn, outside diameter 0.30mm, inside diameter 0.2mm, wall thickness 0.05mm, 99.5%
GF87559453Silver
rod, 1000mm, diameter 1.5mm, as drawn, 99.95+%
GF87563672Nickel
foil, 100x100mm, thickness 0.125mm, as rolled, 99.99+%
GF87565135Tungsten
foil, 10mm disks, thickness 1.0mm, as rolled, 99.95%
GF87572649Indium
foil, 8mm disks, thickness 0.015mm, 99.8%
GF87572908Polypropylene
(PP), sheet, thickness 10 mm, size 150 × 246 mm
GF87574472Havar® - high-strength non-magnetic alloy, Co42.5Cr20Ni13FeWMoMn
foil, 25 x 25mm, 0.004mm thickness, as rolled, not light tested (nlt)
GF87575978Copper - O.F.H.C.
rod, 500mm, diameter 50.0mm, as drawn, 99.95+%
GF87577037Copper
foil, thickness 0.075 mm, length 50 m, coil width 10 mm
GF87577363Copper
wire reel, 50m, diameter 0.025mm, as drawn, 99.99+%
GF87582550Polyaramid
(polymetaphenylene isophthalamide), honeycomb, thickness 10 mm, size 300 × 300 mm, cell size 5 mm
GF87582752Inconel® 625 - corrosion resistant alloy, Ni61Cr22Mo9Fe5
foil, 6mm disks, 0.025mm thickness, annealed
GF87583113Zirconium
foil, light tested, 100x100mm, thickness 0.007mm, 99.2%
GF87587500Nickel
foil, light tested, 25x25mm, thickness 0.075mm, as rolled, 99.98%
GF87587959Tantalum
wire reel, 1m, diameter 0.025mm, as drawn, 99.9%
GF87588679Tin
foil, thickness 0.005 mm, diameter 10 mm, purity 99.95%
GF87590357Copper-beryllium alloy, Cu98Be2
foil, 4mm disks, 0.25mm thickness, annealed
GF87592630Iron
foil, 100x100mm, thickness 0.125mm, hard, 99.5%
GF87597073Tungsten
wire reel, 10m, diameter 0.05mm, clean, 99.95%
GF87597826Invar® - Controlled Expansion Alloy, Fe64Ni36
foil, 150 x 150mm, 0.75mm thickness, annealed
GF87600405Gold
foil, thickness 0.015 mm, size 25 × 25 mm, purity 99.9%
GF87603891Palladium
foil, 10x10mm, thickness 0.50mm, as rolled, 99.95%
GF87605040Molybdenum
foil, light tested, 25x25mm, thickness 0.009mm, 99.9%
GF87610776Nickel
foil, 50x50mm, thickness 0.125mm, annealed, 99.98%
GF87616772Gold
foil, thickness 0.01 mm, size 100 × 100 mm, purity 99.9%
GF87616851Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
powder, 45micron max. particle size, 100g
GF87620328Iron
rod, 500mm, diameter 30mm, as drawn, 98+%
GF87635290Tin
foil, light tested, 25x25mm, thickness 0.025mm, as rolled, 99.95%
GF87638462Tungsten
wire, straight, 1000mm, diameter 0.25mm, 99.9+%
GF87641231T2 - thermocouple alloy, Ni95(Al+Mn+Si)5
foil, 0.5m coil, 100mm coil width, 0.25mm thickness, annealed
GF87641387Silicon carbide - reaction bonded
tube, outside diameter 15.0 mm, length 150 mm, wall thickness 4.0 mm
GF87651265Magnesium/Nickel
rod, Mg85%/Ni15%, 22 mm diameter, length 200 mm
GF87653571Magnetic shielding alloy, Ni77Fe14Cu5Mo4
foil, 6mm disks, 0.0125mm thickness
GF87663303Nickel
tube, 1000mm, outside diameter 2.5mm, inside diameter 2mm, wall thickness 0.25mm, hard, 99.5%
GF87664450Polyamide - Nylon 12
(PA 12), powder, max. particle size 50micron, weight 1000 g, min. particle size 10micron
GF87666137Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 300 x 300mm, 0.05mm thickness, annealed, light tight (lt)
GF87668421Zinc
foil, 4mm disks, thickness 0.25mm, as rolled, 99.99+%
GF87671784Nickel
foil, light tested, 300x300mm, thickness 0.015mm, 99.9%
GF87674327Zinc
foil, 25mm disks, thickness 0.25mm, as rolled, 99.95+%
GF87677915Tungsten
foil, 1m coil, thickness 0.08mm, coil width .9mm, as rolled, 99.95%
GF87685330Polyvinylchloride - Unplasticized
(UPVC), film, thickness 0.2 mm, diam. 12.7 mm, clear
GF87685352Vanadium
foil, thickness 0.008 mm, size 50 × 50 mm, purity 99.8%
GF87686173Platinum
foil, 30x30mm, thickness 0.2mm, as rolled, 99.95%
GF87686588Polyimide
(PI), laminate, thickness 0.05 mm, size 300 × 300 mm, polymer thickness 0.025mm
GF87705478Polypropylene
(PP), film, thickness 0.55 mm, size 600 × 600 mm, condition copolymer

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top