ALDRICH Brand
Displaying 70601-70650 of 103895 results.
| Sigma Cat.No. | Description |
|---|---|
| GF89694231 | Iron foil, 4mm disks, thickness 0.004mm, 99.85% |
| GF89694781 | Stainless steel - AISI 420 sheet, Fe86.7%/Cr13.0%/C 0.3%, thickness 2.0 mm, size 90 × 90 mm |
| GF89699315 | Nickel tube, 500mm, outside diameter 1.0mm, inside diameter 0.8mm, wall thickness 0.1mm, hard, 99.5% |
| GF89712333 | Copper wire reel, 100m, diameter 0.5mm, as drawn, 99.98+% |
| GF89713019 | Nickel-zirconium alloy, Ni70Zr30 powder, 150micron max. particle size, alloy pre-cursor, 100g |
| GF89714942 | Titanium foil, thickness 0.02 mm, diameter 15 mm, purity 99.6+% |
| GF89718845 | Gold foil, thickness 0.01 mm, diameter 8 mm, purity 99.9% |
| GF89720668 | Iron rod, 27.0 mm diameter, length 50 mm, purity 99.8% |
| GF89729678 | Copper foil, thickness 0.25 mm, diameter 25 mm, high purity 99.99+% |
| GF89734720 | Copper foil, thickness 1.6 mm, size 150 × 150 mm, purity 99.9% |
| GF89750403 | Copper foil, thickness 0.0175 mm, size 300 × 300 mm, purity 99.9% |
| GF89752999 | Polyethylene Terephthalate (polyester, PET, PETP), metallized film, thickness 0.005 mm, L 2 m, coil width 315 mm |
| GF89755644 | Polyimide (PI), chopped fiber, nominal diameter 0.014mm, weight 100 g, fiber size 60 mm |
| GF89756353 | Boron nitride rod, 12.7 mm diameter, length 50 mm, condition hot-pressed |
| GF89761652 | Indium wire reel, 5m, diameter 1.5mm, as drawn, 99.999% |
| GF89773138 | Indium foil, 8mm disks, thickness 0.02mm, 99.8% |
| GF89778245 | Cellulose Acetate Butyrate (CAB), sheet, thickness 1 mm, size 300 × 300 mm |
| GF89779718 | Tungsten rod, 100mm, diameter 2.0mm, centerless ground, 99.95% |
| GF89780428 | Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 500m wire, 0.5mm diameter, annealed |
| GF89780833 | Tin rod, 1000mm, diameter 2.0mm, 99.999+% |
| GF89781429 | Silver foil, 15mm disks, thickness 0.009mm, 99.97% |
| GF89781621 | Nickel foil, thickness 1.0 mm, size 200 × 200 mm, purity 99% |
| GF89783847 | Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 50mm disks, 0.08mm thickness, annealed |
| GF89789764 | Magnetic shielding alloy, Ni77Fe14Cu5Mo4 foil, 1m coil, 0.05mm thickness |
| GF89795132 | Zirconium foil, light tested, 100x100mm, thickness 0.02mm, 99.2% |
| GF89800599 | Tungsten powder, 250 max. part. size (micron), weight 100 g, min. particle size 50 micron |
| GF89801927 | Aluminum nickelide powder, 150 max. part. size (micron), weight 50 g |
| GF89806348 | Vanadium foil, thickness 0.007 mm, purity 99.8%, size 25 × 25 mm |
| GF89807091 | Lead lump, 10 mm max. lump size, weight 100 g, high purity 99.99+% |
| GF89812794 | Gold foil, diameter 4 mm, thickness 0.015 mm, purity 99.9% |
| GF89821985 | Molybdenum rod, 100mm, diameter 20.0mm, centerless ground, 99.9% |
| GF89822054 | Aluminum alloy 5083 foil, Al95%/Mg 4.5%/Mn 0.5%, thickness 1.2 mm, size 300 × 300 mm |
| GF89822065 | Dysprosium foil, not light tested, 5x5mm, thickness 0.005mm, as rolled, 99% |
| GF89822481 | Polybutylene Terephthalate - 30% Glass Fiber Reinforced (PBT 30% GFR), rod, diam. 30 mm, L 200 mm, condition machining feedstock |
| GF89827521 | Monel® alloy 400, Ni65Cu33Fe2 foil, 300 x 300mm, 0.5mm thickness, annealed |
| GF89829242 | Invar® - controlled expansion alloy sheet, Fe64%/Ni36%, thickness 2.5 mm, size 100 × 100 mm, temper annealed |
| GF89832033 | Lead microfoil, disks, 10mm, thinness 1.0μm, specific density 1047.8μg/cm2, permanent mylar 3.5μm support, 99.99+% |
| GF89832257 | Phosphor bronze alloy, Cu94Sn6 20m insulated wire, 0.025mm conductor diameter, 0.0025mm insulation thickness, polyimide insulation |
| GF89833854 | Tantalum foil, 4mm disks, thickness 0.5mm, annealed, 99.9% |
| GF89836509 | Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 50m insulated wire, 0.05mm conductor diameter, 0.003mm insulation thickness, polyester insulation |
| GF89836857 | Silver foil, thickness 0.030 mm, size 260 × 300 mm, purity 99.95+% |
| GF89836936 | Stainless Steel - AISI 302 alloy, FeCr18Ni8 2m wire, 1.0mm diameter, hard |
| GF89838220 | Palladium foil, light tested, 50x50mm, thickness 0.075mm, as rolled, 99.95% |
| GF89840436 | Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 8mm disks, 0.05mm thickness, as rolled - condition c, precipitation hardenable |
| GF89848197 | Tungsten wire reel, 25m, diameter 0.1mm, clean, 99.95% |
| GF89849918 | Stainless Steel - AISI 347 alloy, FeCr18Ni10Nb foil, 300 x 300mm, 0.25mm thickness, annealed |
| GF89851708 | Copper foil, thickness 0.11 mm, size 25 × 25 mm, purity 99.95% |
| GF89866939 | Iron rod, 4.0 mm diameter, length 300 mm, high purity 99.99+% |
| GF89872633 | Nickel- 10m wire, 0.5mm diameter, as drawn |
| GF89878347 | Polymethylmethacrylate (PMMA, ACRYLIC), tube, outside diameter 40mm, L 500 mm, wall thickness 3 mm |