ALDRICH Brand
Displaying 32901-32950 of 66743 results.
| Sigma Cat.No. | Description |
|---|---|
| GF20784359 | Glass Sealing Alloy, Fe54Ni29Co17 foil, 4mm disks, 0.075mm thickness, annealed, flattened |
| GF20784360 | Aluminum sphere, 100pcs, diameter 2.5mm, aluminum alloy 2017 precision sphere, grade 200, 95.2% |
| GF20794912 | Aluminum-magnesium alloy, Al97Mg3 foil, 100 x 100mm, 0.25mm thickness, as rolled |
| GF20795968 | Peridot powder, max. particle size 100 micron, weight 10 g, condition gemstone powder |
| GF20797982 | Polyaramid (polyparaphenylene terephthalamide), fabric, weight.m-2-220g, L 1 m, coil width 1200 mm |
| GF20800437 | Iron foil, thickness 0.9 mm, 6 mm diameter, purity 99.5% |
| GF20804587 | Polyphenyleneoxide (PPO ), (ppo (modified), ppe (modified)), rod, diam. 50 mm, L 100 mm, pale gray |
| GF20810641 | Polytetrafluoroethylene (PTFE), tube, outside diameter 9.25mm, L 500 mm, wall thickness 0.375 mm |
| GF20817198 | T1 - thermocouple alloy, Ni90Cr10 insulated wire, 10m length, 0.05mm conductor diameter, 0.005mm insulation thickness, polyurethane insulation |
| GF20819088 | Terbium powder, 2g, max. particle size 500 micron, 99.9% |
| GF20821553 | Polyamide - Nylon 6, 6 (PA 6,6), sheet, thickness 5 mm, size 100 × 100 mm |
| GF20834704 | Tin foil, light tested, 150x150mm, thickness 0.025mm, as rolled, 99.95% |
| GF20835356 | Iron-Nickel alloy, Fe58Ni42 sheet, 100 x 100mm, 3.2mm thickness, annealed |
| GF20836133 | Monel® alloy k-500, Ni63Cu30Al3Fe2Mn1.5Ti0.5 sheet, 100 x 100mm, 3.5mm thickness, annealed |
| GF20836425 | Iridium foil, 0.025m coil, thickness 0.05mm, coil width .5mm, as rolled, 99.9% |
| GF20837561 | Copper - O.F.H.C. foil, 15mm disks, thickness 0.010mm, hard, 99.95+% |
| GF20839316 | Aluminum-silicon alloy, Al99Si1 200mm rod, 18mm diameter, as drawn |
| GF20851275 | Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 25 x 25mm, 0.5mm thickness, titanium nitride coating 2-3 microns surface treatment |
| GF20857484 | Gold/Silver rod, Au 50%/Ag 50% (Atomic %), 3.0 mm diameter, length 10 mm, temper as drawn |
| GF20867586 | Stainless steel - AISI 303 alloy, FeCr18Ni9MnSi 500mm rod, 12mm diameter |
| GF20870388 | Polyethylene - U.H.M.W. (UHMW PE), rod, diam. 15 mm, L 500 mm, condition machining feedstock |
| GF20871288 | Invar® - Controlled Expansion Alloy, Fe64Ni36 1000mm rod, 3.2mm diameter |
| GF20874999 | Tantalum foil, 4mm disks, thickness 0.034mm, as rolled, 99.9% |
| GF20882538 | Stainless Steel - AISI 302 alloy, FeCr18Ni8 foil, 100 x 100mm, 0.1mm thickness, hard |
| GF20882998 | Titanium rod, 200mm, diameter 5mm, annealed, 99.6+% |
| GF20883292 | Niobium foil, thickness 0.25 mm, 50 mm diameter, purity 99.9% |
| GF20887757 | Nickel-chromium alloy, Ni80Cr20 5m wire, 0.75mm diameter, annealed |
| GF20893833 | Aluminum foil, thickness 0.125 mm, 50 mm diameter, high purity 99.999% |
| GF20895903 | Nickel microfoil, disks, 25mm, thinness 1.0μm, specific density 895.8μg/cm2, permanent mylar 3.5μm support, 99.99+% |
| GF20896904 | Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn foil, 25 x 25mm, 0.075mm thickness, annealed, light tight (lt) |
| GF20897196 | Tungsten-rhenium alloy, W95Re5 0.1m wire, 0.5mm diameter, annealed |
| GF20898625 | Tantalum foil, 0.5m coil, thickness 0.01mm, 99.9% |
| GF20899604 | Aluminum rod, 200mm, diameter 6.0mm, as drawn, 99.999% |
| GF20903161 | Polyethylene Terephthalate (polyester, PET, PETP), metallized film, thickness 0.05 mm, size 150 × 150 mm, ohms/square 2 |
| GF20911148 | Quartz - fused powder, max. particle size 45 micron, weight 500 g |
| GF20922061 | Aluminum wire reel, 35m, diameter 0.05mm, as drawn, 99.99+% |
| GF20924197 | Iron/nickel rod, Fe 54%/Ni 46%, 8.2 mm diameter, length 200 mm, temper as drawn |
| GF20925626 | Tantalum foil, 6mm disks, thickness 0.75mm, annealed, 99.9% |
| GF20926874 | Titanium foil, thickness 0.006 mm, 6 mm diameter, purity 99.6+% |
| GF20932310 | Molybdenum-titanium alloy, Mo80Ti20 powder, 150micron max. particle size, alloy pre-cursor, 500g |
| GF20948946 | Tin lump, 5 mm max. lump size, weight 50 g, high purity 99.995% |
| GF20958947 | Cadmium foil, 300x300mm, thickness 0.5mm, as rolled, 99.99% |
| GF20964427 | Copper - O.F.H.C. foil, 2m coil, thickness 0.075mm, half hard, 99.95+% |
| GF20966913 | Polyethylene - U.H.M.W. (UHMW PE), fiber, tex number 26720, L 2 m, cord diameter 6mm |
| GF20973517 | Nickel foil, 0.5m coil, thickness 0.0125mm, 99.9% |
| GF20974967 | Polyethylene - High Density (HDPE), rod, diam. 25 mm, L 1000 mm |
| GF20981055 | Copper foil, thickness 0.125 mm, length 20 m, purity 99.9% |
| GF20981358 | Iron rod, 50mm, diameter 12.7mm, as drawn, 99.95% |
| GF20998503 | Copper foil, thickness 0.0125 mm, length 2 m, high purity 99.99+% |
| GF20999133 | Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn foil, 1m coil, 0.075mm thickness, hard |