Advanced Search

ALDRICH Brand

Displaying 36651-36700 of 68959 results.
Sigma Cat.No.Description
GF29424977Polyaramid
(polymetaphenylene isophthalamide), film, thickness 0.05 mm, L 10 m, type t410
GF29426654Evanohm® - precision resistance alloy, Ni75Cr20Al2.5Cu2.5
foil, 0.2m coil, 0.02mm thickness, annealed
GF29427756Tin
foil, thickness 0.005 mm, size 50 × 50 mm, purity 99.95%
GF29431694Indium
foil, 100x100mm, thickness 2.0mm, as rolled, 99.999%
GF29433348Tungsten
wire reel, 25m, diameter 0.75mm, clean, 99.95%
GF29434608Silver
foil, 8mm disks, thickness 0.1mm, annealed, 99.95+%
GF29439850Manganin® - resistance alloy, Cu86Mn12Ni2
foil, 100 x 100mm, 0.025mm thickness, annealed, light tight (lt)
GF29446814Carbon
foil, 500x500mm, thickness 0.5mm, flexible graphite, 99.8%
GF29455724Cobalt
foil, 50x50mm, thickness 0.7mm, annealed, 99.9%
GF29460528Monel® alloy 400, Ni65Cu33Fe2
500mm tube, 3.175mm outside diameter, 0.2mm wall thickness, 2.775mm inside diameter, as drawn
GF29464667Platinum
microfoil, disks, 25mm, thinness 1.0μm, specific density 900μg/cm2, permanent mylar 3.5μm support, 99.99+%
GF29465039Magnetic shielding alloy, Ni77Fe14Cu5Mo4
foil, 6mm disks, 0.15mm thickness, annealed
GF29472600Platinum-rhodium alloy, Pt87Rh13
100m wire, 0.025mm diameter, annealed
GF29478730Polyaramid
(polymetaphenylene isophthalamide), film, thickness 0.25 mm, size 300 × 300 mm, type t410
GF29479438Platinum
foil, 0.05m coil, thickness 0.15mm, coil width .9mm, as rolled, 99.99%
GF29481396Nickel-iron-molybdenum alloy, Ni80Fe15.5Mo4.5
200mm tube, 15mm outside diameter, 0.4mm wall thickness, 14.2mm inside diameter, as drawn
GF29485075Stainless Steel - AISI 304 alloy, FeCr18Ni10
50m wire, 0.075mm diameter, annealed
GF29487617Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb
foil, 50 x 50mm, 1.0mm thickness, annealed
GF29491061Polytetrafluoroethylene
(PTFE), film, thickness 0.3 mm, size 300 × 300 mm
GF29491386Copper
insulated wire, conductor diameter 0.025 mm, length 5 m, insulation thickness 0.002 mm
GF29493456Tin
foil, 10m coil, thickness 0.072mm, coil width 41mm, as rolled, 99.95%
GF29496606Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8
foil, 25 x 25mm, 0.5mm thickness, titanium nitride coating 2-3 microns
GF29502750Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 15mm disks, 0.075mm thickness, annealed
GF29503830Tin
foil, 4mm disks, thickness 0.004mm, as rolled, 99.99+%
GF29505191Antimony
foil, thickness 0.02 mm, size 50 × 50 mm, purity 95+%
GF29509016Iron-Chromium-Molybdenum alloy, Fe90Cr9Mo1
foil, 4mm disks, 0.008mm thickness, as rolled
GF29509768Vanadium
powder, max. particle size 45 micron, weight 100 g, purity 99.7+%
GF29517464Ytterbium
rod, 50mm, diameter 2.0mm, cast, 99%
GF29520963Copper
tube, 200mm, outside diameter 25.4mm, inside diameter 18.9mm, wall thickness 3.25mm, as drawn, 99.9%
GF29521784Aluminum
foil, thickness 1.0 mm, size 150 × 150 mm, purity 99%
GF29522101Platinum
foil, 10mm disks, thickness 0.01mm, as rolled, 99.95%
GF29527184Phosphor bronze alloy, Cu94Sn6
10m wire, 1.0mm diameter, as drawn
GF29529074Molybdenum high temperature alloy tzm, Mo99Ti0.5Zr0.1
rod, 1000mm x 10.0mm diameter
GF29529153Copper
foil, thickness 0.5 mm, 8 mm diameter, purity 99.9%
GF29532359Zirconium
foil, 8mm disks, thickness 0.01mm, 99.2%
GF29533844Aluminum
foil, thickness 0.10 mm, length 2 m, coil width 152 mm
GF29535532Nickel-chromium alloy, Ni80Cr20
foil, 25 x 25mm, 0.50mm thickness, as rolled
GF29539705Hastealloy® c-22
rod, Ni59%/Cr22%/Mo13%/Fe 3%/W 3, 50.8 mm diameter, length 50 mm, temper annealed
GF29548794Boron nitride
powder, max. particle size 10 micron, weight 200 g, purity 99.5%
GF29550214Cobalt-titanium alloy, Co94Ti6
powder, 45micron max. particle size, alloy pre-cursor, 200g
GF29554511Polyaramid
(polyparaphenylene terephthalamide), fabric, weight.m-2-220g, L 2 m, coil width 1200 mm
GF29556119Aluminum-magnesium alloy, Al97Mg3
100mm tube, 0.53mm outside diameter, 0.075mm wall thickness, 0.38mm inside diameter, as drawn
GF29558571Platinum
foil, not light tested, 25x25mm, thickness 0.025mm, as rolled, 99.99+%
GF29558582Iron
foil, 50x50mm, thickness 2mm, as rolled, 99.99+%
GF29560013Polyetheretherketone
(PEEK), tube, outside diameter 1.6mm, L 1000 mm, wall thickness 0.3 mm
GF29561799Iron
rod, 500mm, diameter 3.0mm, as drawn, 99.99+%
GF29562914Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
100m insulated wire, 0.05mm conductor diameter, 0.003mm insulation thickness, polyester insulation
GF29563555Nickel
wire reel, 10m, diameter 0.5mm, annealed, 99%
GF29563870Nickel-iron alloy, Ni80Fe20
2m wire, 1.0mm diameter, as drawn
GF29572678Aluminum
foil, thickness 0.040 mm, 50 mm diameter, purity 99%

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top