ALDRICH Brand
Displaying 38351-38400 of 68959 results.
| Sigma Cat.No. | Description |
|---|---|
| GF36180176 | Tantalum wire reel, 1m, diameter 1.0mm, annealed, 99.9% |
| GF36181245 | Invar® - Controlled Expansion Alloy, Fe64Ni36 100mm rod, 25mm diameter |
| GF36181470 | Polyvinylidenefluoride (PVDF), washer, size m3, length 10 pcs, outside diameter 7 mm |
| GF36189298 | Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 150 x 150mm, 0.0125mm thickness, hard, light tight (lt) |
| GF36194182 | Polyetheretherketone (PEEK), film, thickness 0.1 mm, size 300 × 300 mm, transparent pale amber |
| GF36199301 | Tungsten wire reel, 500m, diameter 0.08mm, clean, 99.95% |
| GF36201338 | Molybdenum foil, light tested, 100x100mm, thickness 0.05mm, annealed, 99.9% |
| GF36201743 | Copper - O.F.H.C. rod, 50mm, diameter 63.5mm, as drawn, 99.95+% |
| GF36202193 | Platinum/Iridium wire, Pt 90%/Ir10%, 0.25 mm diameter, length 0.1 m, temper annealed |
| GF36205860 | Silver insulated wire, 5m, conductor diameter 0.025mm, insulation thickness 0.005mm, polyurethane insulation, 99.99% |
| GF36212138 | Copper-beryllium alloy, Cu98Be2 foil, 0.5m coil, 0.25mm thickness, half hard |
| GF36220227 | Zirconium rod, 1000mm, diameter 5.0mm, centerless ground, 99.2% |
| GF36223084 | Manganin® - resistance alloy, Cu86Mn12Ni2 20m wire, 1.0mm diameter, annealed |
| GF36225569 | Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi foil, 100 x 100mm, 1.0mm thickness, annealed |
| GF36225693 | Zinc foil, 1m coil, thickness 0.15mm, as rolled, 99.95+% |
| GF36226919 | Havar® - high-strength non-magnetic alloy, Co42.5Cr20Ni13FeWMoMn foil, 10mm disks, 0.05mm thickness, as rolled |
| GF36228573 | Molybdenum foil, 10mm disks, thickness 0.75mm, annealed, 99.9% |
| GF36231117 | Alumina Bolt, size m4 x 25 mm, length 25 pcs, head style hexagonal |
| GF36239069 | Lead foil, not light tested, 100x100mm, thickness 0.007mm, 99.99+% |
| GF36253942 | Hafnium foil, 15mm disks, thickness 0.25mm, annealed, 97% |
| GF36256631 | Zinc foil, light tested, 100x100mm, thickness 0.05mm, as rolled, 99.95+% |
| GF36257384 | Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 25 x 25mm, 0.05mm thickness, as rolled - condition c, precipitation hardenable, light tight (lt) |
| GF36257823 | Vanadium foil, thickness 0.015 mm, size 100 × 100 mm, purity 99.8% |
| GF36269398 | Cadmium foil, 8mm disks, thickness 0.25mm, as rolled, 99.99+% |
| GF36271470 | Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 foil, 0.5m coil, 0.15mm thickness, annealed |
| GF36275339 | Polyethylene - U.H.M.W. (UHMW PE), fiber, tex number 1670, L 100 m, cord diameter 1.5mm |
| GF36277443 | Polytetrafluoroethylene (PTFE), sheet, thickness 2 mm, size 150 × 150 mm |
| GF36278264 | Brass alloy, Cu63Zn37 foil, 10mm disks, 150mm coil width, 0.25mm thickness, half hard |
| GF36280021 | Platinum foil, 0.2m coil, thickness 0.025mm, coil width .4mm, as rolled, 99.95% |
| GF36282056 | Aluminum-magnesium alloy, Al95Mg5 1000mm tube, 0.61mm outside diameter, 0.07mm wall thickness, 0.47mm inside diameter, as drawn |
| GF36285891 | Polyimide (PI), metallized film, thickness 0.025 mm, size 150 × 150 mm, condition metallized on one side with 30 nm aluminum |
| GF36286881 | Indium lump, 20 mm max. lump size, weight 10 g, high purity 99.99999% |
| GF36288276 | Alumina Bar, 20 mm, size 736 mm, side length (of longer side) 25mm |
| GF36304400 | Tungsten carbide powder, max. particle size 150 micron, weight 200 g, min. particle size 45 micron |
| GF36309450 | Iridium wire reel, 0.1m, diameter 0.38mm, as drawn, 99.9% |
| GF36312645 | Manganin® - resistance alloy, Cu86Mn12Ni2 foil, 200 x 300mm, 0.02mm thickness, as rolled, not light tested (nlt) |
| GF36327652 | Nickel foil, 150x150mm, thickness 0.25mm, annealed, 99% |
| GF36330487 | Iron-Nickel alloy, Fe55Ni45 foil, 1m coil, 0.1mm thickness |
| GF36339408 | Nickel foil, light tested, 50x50mm, thickness 0.025mm, annealed, 99% |
| GF36342828 | Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 10mm disks, 0.0125mm thickness |
| GF36344279 | Copper foil, thickness 0.03 mm, length 5 m, coil width 16 mm |
| GF36349049 | Stainless Steel - AISI 304 alloy, FeCr18Ni10 1000mm tube, 0.2mm outside diameter, 0.05mm wall thickness, 0.1mm inside diameter, hard |
| GF36350175 | Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 20m coil, 25mm coil width, 0.15mm thickness, as rolled - condition c, precipitation hardenable |
| GF36353459 | Platinum foil, thickness 0.05 mm, length 0.05 m, coil width 5 mm |
| GF36364743 | Magnetic copper wire, Cu 99.96%/Fe 0.04%, 0.5 mm diameter, length 50 m, filament diameter 0.1 microns |
| GF36369007 | Molybdenum wire reel, 50m, diameter 0.015mm, gold plated, 99.95% |
| GF36371853 | Magnesium foil, thickness 0.05 mm, 8 mm diameter, purity 99.9% |
| GF36372281 | Phosphor bronze alloy, Cu94Sn6 1000m wire, 0.25mm diameter, as drawn |
| GF36378906 | Polypropylene (PP), film, thickness 0.008 mm, L 20 m, condition biaxially oriented |
| GF36379345 | Rhodium foil, light tested, 15x15mm, thickness 0.05mm, as rolled, 99.9% |