Advanced Search

ALDRICH Brand

Displaying 39051-39100 of 68959 results.
Sigma Cat.No.Description
GF38961973Silver
insulated wire, 5m, conductor diameter 0.25mm, insulation thickness 0.015mm, epoxy insulation, 99.99%
GF38966349Polyvinylidenefluoride
(PVDF), metallized film, thickness 0.025 mm, size 50 × 50 mm, ohms/square 2
GF38967193Palladium
foil, not light tested, 25x25mm, thickness 0.03mm, as rolled, 99.95%
GF38968666Indium
foil, 4mm disks, thickness 0.01mm, 99.8%
GF38968879Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb
foil, 25 x 25mm, 0.075mm thickness, annealed, light tight (lt)
GF38981065Polyethylene Terephthalate
(polyester, PET, PETP), film, thickness 0.075 mm, L 0.5 m, coil width 914 mm
GF38989591Stainless Steel - AISI 302 alloy, FeCr18Ni8
25m wire, 0.1mm diameter, annealed
GF38991987Lead
foil, 10m coil, thickness 0.15mm, as rolled, 99.95%
GF38992887Tetrafluoroethylene-Perfluoro(alkoxy vinyl ether)
(alkoxy vinyl ether), (pfa), rod, diam. 25 mm, L 100 mm
GF39002677Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 10mm disks, 0.038mm thickness, annealed
GF39002891Stainless steel - AISI 316l
foil, Fe/Cr18%/Ni 10%/Mo 3%, thickness 0.25 mm, length 1 m, coil width 12 mm
GF39003241Silver
foil, 6mm disks, thickness 0.0125mm, 99.95+%
GF39003926Phosphor bronze alloy, Cu94Sn6
100m wire, 0.25mm diameter, as drawn
GF39005669Nickel
foil, 2m coil, thickness 0.025mm, annealed, 99%
GF39005760Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8
foil, 2m coil, 76mm coil width, 0.1mm thickness, annealed
GF39006794Stainless Steel - AISI 316L alloy, FeCr18Ni10Mo3
50m wire, 0.3mm diameter, as drawn
GF39013040Platinum-iridium alloy, Pt90Ir10
0.5m wire, 0.5mm diameter, as drawn
GF39019260Zinc oxide
powder, max. particle size 45 micron, weight 100 g, high purity 99.999%
GF39022815Tin
foil, 100x100mm, thickness 1.0mm, as rolled, 98.8%
GF39029306Nickel
foil, 50mm disks, thickness 0.025mm, annealed, 99%
GF39029968Gold
rod, 100mm, diameter 2.0mm, as drawn, 99.95%
GF39030353Cerium
rod, 100mm, diameter 12.7mm, cast, 99.9%
GF39038407Silver
foil, 8mm disks, thickness 0.15mm, as rolled, 99.95+%
GF39040084Titanium
rod, 100mm, diameter 16mm, annealed, 99.6+%
GF39042301Copper-beryllium alloy, Cu98Be2
foil, 50 x 50mm, 0.25mm thickness, half hard
GF39045090Copper
wire reel, 100m, diameter 0.075mm, annealed, 99.9%
GF39051985Indium-tin alloy, In90Sn10
sheet, 50 x 50mm, 3.0mm thickness
GF39052335Stainless Steel - Duplex alloy, Fe69.5Cr22Ni5.5Mo3N
50m wire, 0.5mm diameter
GF39053820Iron
tube, 200mm, outside diameter 2.30mm, inside diameter 2.07mm, wall thickness 0.115mm, as drawn, 99.5%
GF39056182Tantalum
wire reel, 50m, diameter 0.05mm, annealed, 99.9%
GF39069760Cellulose Acetate
(CA), film, thickness 0.075 mm, size 150 × 150 mm, natural
GF39071190Copper
foil, thickness 0.01 mm, 4 mm diameter, high purity 99.99+%
GF39079200Silver
foil, 15mm disks, thickness 0.01mm, 99.95+%
GF39079884Quartz - fused
sheet, thickness 3.0 mm, size 50 × 50 mm, condition polished both sides
GF39082675Gold
foil, thickness 0.025 mm, 6 mm diameter, high purity 99.99+%
GF39088648Carbon - Vitreous
tube, 50mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon
GF39090405Copper
insulated wire, 10m, conductor diameter 0.1mm, insulation thickness 0.015mm, 10-30 micron polyesterimide insulation, 99.9%
GF39091158Yttrium
wire reel, 0.1m, diameter 1.0mm, 99.9%
GF39094904Palladium
tube, 50mm, outside diameter 1.0mm, inside diameter 0.8mm, wall thickness 0.1mm, as drawn, 99.95%
GF39108742Aluminum-magnesium alloy, Al97Mg3
foil, 25mm disks, 0.01mm thickness
GF39120814Alumina
sheet, thickness 0.15 mm, size 50 × 50 mm, purity 96.%
GF39121354Nickel
foil, thickness 0.10 mm, length 5 m, coil width 1 mm
GF39123132Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8
5m wire, 0.60mm diameter, hard
GF39123558Iridium
powder, max. particle size 50 micron, weight 2 g, purity 99.9%
GF39124346Zinc-copper alloy, Zn95Cu5
powder, 150micron max. particle size, alloy pre-cursor, 100g
GF39127305Tungsten-rhenium alloy, W75Re25
5m wire, 0.25mm diameter, annealed
GF39131186Chromium
foil, not light tested, 50x50mm, thickness 0.025mm, permanent polyester support, 99.99+%
GF39141143Silver
foil, 8mm disks, thickness 0.1mm, as rolled, 99.95+%
GF39141389Aluminum-magnesium alloy, Al97Mg3
foil, 25 x 25mm, 0.01mm thickness, light tight (lt)
GF39143921Tin-lead-antimony alloy, Sn60Pb39Sb1
foil, 8mm disks, 0.10mm thickness

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top