Advanced Search

ALDRICH Brand

Displaying 41901-41950 of 67453 results.
Sigma Cat.No.Description
GF52827060Aluminum
foil, thickness 0.38 mm, size 25 × 25 mm, purity 99%
GF52830536Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn
foil, 10mm disks, 0.025mm thickness, as rolled
GF52831829Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 6mm disks, 0.25mm thickness, annealed
GF52839760Aluminum
foil, thickness 0.125 mm, size 150 × 150 mm, purity 99%
GF52842225Beryllium
foil, thickness 0.25 mm, size 25 × 25 mm, purity 99.8+%
GF52848131Polyethylene Terephthalate
(polyester, PET, PETP), metallized film, thickness 0.036 mm, size 1000 × 1000 mm, ohms/square 700
GF52848209Copper
foil, thickness 0.125 mm, length 2 m, coil width 50.8 mm
GF52856781Nickel
foil, 6mm disks, thickness 0.003mm, 99.95%
GF52863509Niobium
foil, thickness 1.5 mm, size 100 × 100 mm, purity 99.9%
GF52864779Molybdenum
foil, light tested, 25x25mm, thickness 0.01mm, 99.9%
GF52867154Stainless Steel - AISI 304 alloy, FeCr18Ni10
powder, 45micron max. particle size, 1000g
GF52877346Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 6mm disks, 0.043mm thickness, annealed
GF52882533Lead
tube, 100mm, outside diameter 6.78mm, inside diameter 4.7mm, wall thickness 1.04mm, 99.9%
GF52888146Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn
200mm tube, 6.35mm outside diameter, 0.9mm wall thickness, 4.55mm inside diameter
GF52889552Polyacrylonitrile-Butadiene-Styrene
(ABS), sheet, thickness 1.59 mm, size 600 × 600 mm, white
GF52894907Molybdenum-rhenium alloy, Mo52.5Re47.5
foil, 25 x 25mm, 0.125mm thickness, annealed
GF52902840Beryllium
wire reel, 1m, diameter 0.125mm, annealed and clean, 99.7%
GF52905809Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8
200mm tube, 1.5mm outside diameter, 0.25mm wall thickness, 1mm inside diameter
GF52909409Polycarbonate
(PC), film, thickness 0.75 mm, size 150 × 150 mm, clear
GF52922190Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 15mm disks, 0.25mm thickness, annealed
GF52930762Palladium
microfoil, disks, 10mm, thinness 0.5μm, specific density 303.4μg/cm2, permanent mylar 3.5μm support, 99.99%
GF52935172Constantan - resistance alloy, Cu55Ni45
insulated wire, 100m length, 0.025mm conductor diameter, 0.003mm insulation thickness, polyurethane insulation
GF52942226Copper
tube, 100mm, outside diameter 0.65mm, inside diameter 0.21mm, wall thickness 0.22mm, as drawn, 99.9%
GF52944150Nickel
foil, 25x25mm, thickness 1.0mm, as rolled, 99.999%
GF52950191Silver
foil, 4mm disks, thickness 0.025mm, as rolled, 99.99+%
GF52959785Zinc
foil, 300x300mm, thickness 0.1mm, as rolled, 99.95+%
GF52964006Aluminum
tube, 100mm, outside diameter 1.96mm, inside diameter 1.4mm, wall thickness 0.28mm, as drawn, 99.5%
GF52971363Polycarbonate
(PC), sheet, thickness 5 mm, size 300 × 300 mm, clear
GF52978090Lead
foil, 10mm disks, thickness 0.25mm, as rolled, 99.95%
GF52986853Monel® alloy 400, Ni65Cu33Fe2
rod, 1000mm x 12.7mm diameter, as drawn
GF52996652Polycarbonate
(PC), metallized film, thickness 0.002 mm, L 2 m, ohms/square 4
GF53004620Stainless Steel - AISI 304 alloy, FeCr18Ni10
foil, 100 x 100mm, 0.007mm thickness, as rolled, not light tested (nlt)
GF53009456Tungsten-rhenium alloy, W75Re25
0.05m wire, 1.0mm diameter, annealed
GF53017219Tungsten
wire, 1.2 mm diameter, length 20 m, purity 99.95%
GF53021225Hafnium
foil, 8mm disks, thickness 0.007mm, 97%
GF53022541Stainless Steel - AISI 347 alloy, FeCr18Ni10Nb
powder, 45micron max. particle size, atomized, 500g, 99.999%
GF53022833Manganese
foil, not light tested, 50x50mm, thickness 0.007mm, permanent polyester support, 98.7%
GF53034667Polyetheretherketone
(PEEK), rod, diam. 50 mm, L 200 mm, gray
GF53037637Aluminum/Copper metal matrix composite
rod, Al 77.9%/SiC 17.8%/Cu 3.3%/Mg 1.2%/Mn 0.4%, 15 mm diameter, length 200 mm, condition metal matrix composite
GF53038537Silver
rod, 500mm, diameter 2.0mm, as drawn, 99.95+%
GF53039347Fecralloy - Iron-Chromium, Fe72.8Cr22Al5Y0.1Zr0.1
500g lump, 50mm max. lump size, pellets
GF53047548Glass Sealing Alloy, Fe54Ni29Co17
1000mm tube, 4.24mm outside diameter, 0.38mm wall thickness, 3.48mm inside diameter, as drawn
GF53052128Aluminum
foil, thickness 0.050 mm, 8 mm diameter, purity 99%
GF53057099Stainless Steel - AISI 304 alloy, FeCr18Ni10
mesh, 100 x 100mm, 0.38mm nominal aperture, 0.75mm thickness, 0.25mm wire diameter, 40 x 40 wires/inch, 0.37 open area, plain weave mesh
GF53057527Tungsten
wire reel, 10m, diameter 0.005mm, hard, clean, 99.95%
GF53057796Iron
foil, thickness 0.10 mm, 6 mm diameter, purity 99.8%
GF53058775Tantalum
foil, 100x100mm, thickness 2.0mm, annealed, 99.9%
GF53074054Titanium
foil, thickness 0.025 mm, size 300 × 300 mm, purity 99.6+%
GF53077259Nickel silver
rod, Cu 45%/Zn 43%/Ni 10%/Pb 2%, 20.5 mm diameter, length 100 mm
GF53078182Cadmium
rod, 150mm, diameter 10.0mm, as drawn, 99.99+%

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top