Advanced Search

ALDRICH Brand

Displaying 42501-42550 of 68959 results.
Sigma Cat.No.Description
GF52950191Silver
foil, 4mm disks, thickness 0.025mm, as rolled, 99.99+%
GF52959785Zinc
foil, 300x300mm, thickness 0.1mm, as rolled, 99.95+%
GF52964006Aluminum
tube, 100mm, outside diameter 1.96mm, inside diameter 1.4mm, wall thickness 0.28mm, as drawn, 99.5%
GF52971363Polycarbonate
(PC), sheet, thickness 5 mm, size 300 × 300 mm, clear
GF52978090Lead
foil, 10mm disks, thickness 0.25mm, as rolled, 99.95%
GF52986853Monel® alloy 400, Ni65Cu33Fe2
rod, 1000mm x 12.7mm diameter, as drawn
GF52996652Polycarbonate
(PC), metallized film, thickness 0.002 mm, L 2 m, ohms/square 4
GF53004620Stainless Steel - AISI 304 alloy, FeCr18Ni10
foil, 100 x 100mm, 0.007mm thickness, as rolled, not light tested (nlt)
GF53009456Tungsten-rhenium alloy, W75Re25
0.05m wire, 1.0mm diameter, annealed
GF53017219Tungsten
wire, 1.2 mm diameter, length 20 m, purity 99.95%
GF53021225Hafnium
foil, 8mm disks, thickness 0.007mm, 97%
GF53022541Stainless Steel - AISI 347 alloy, FeCr18Ni10Nb
powder, 45micron max. particle size, atomized, 500g, 99.999%
GF53022833Manganese
foil, not light tested, 50x50mm, thickness 0.007mm, permanent polyester support, 98.7%
GF53034667Polyetheretherketone
(PEEK), rod, diam. 50 mm, L 200 mm, gray
GF53037637Aluminum/Copper metal matrix composite
rod, Al 77.9%/SiC 17.8%/Cu 3.3%/Mg 1.2%/Mn 0.4%, 15 mm diameter, length 200 mm, condition metal matrix composite
GF53038537Silver
rod, 500mm, diameter 2.0mm, as drawn, 99.95+%
GF53039347Fecralloy - Iron-Chromium, Fe72.8Cr22Al5Y0.1Zr0.1
500g lump, 50mm max. lump size, pellets
GF53047548Glass Sealing Alloy, Fe54Ni29Co17
1000mm tube, 4.24mm outside diameter, 0.38mm wall thickness, 3.48mm inside diameter, as drawn
GF53052128Aluminum
foil, thickness 0.050 mm, 8 mm diameter, purity 99%
GF53057099Stainless Steel - AISI 304 alloy, FeCr18Ni10
mesh, 100 x 100mm, 0.38mm nominal aperture, 0.75mm thickness, 0.25mm wire diameter, 40 x 40 wires/inch, 0.37 open area, plain weave mesh
GF53057527Tungsten
wire reel, 10m, diameter 0.005mm, hard, clean, 99.95%
GF53057796Iron
foil, thickness 0.10 mm, 6 mm diameter, purity 99.8%
GF53058775Tantalum
foil, 100x100mm, thickness 2.0mm, annealed, 99.9%
GF53074054Titanium
foil, thickness 0.025 mm, size 300 × 300 mm, purity 99.6+%
GF53077259Nickel silver
rod, Cu 45%/Zn 43%/Ni 10%/Pb 2%, 20.5 mm diameter, length 100 mm
GF53078182Cadmium
rod, 150mm, diameter 10.0mm, as drawn, 99.99+%
GF53085203Evanohm® - precision resistance alloy, Ni75Cr20Al2.5Cu2.5
foil, 25 x 25mm, 0.025mm thickness, annealed, light tight (lt)
GF53091783Tin
lump, 5 mm max. lump size, weight 100 g, high purity 99.995%
GF53102438Copper
tube, 500mm, outside diameter 1.2mm, inside diameter 0.56mm, wall thickness 0.32mm, as drawn, 99.9%
GF53108984Alumina
rod, 5.0 mm diameter, length 200 mm, purity 99%
GF53111416Neodymium-iron-boron alloy, Nd2Fe14B
3mm rod, 15mm diameter, rare earth magnet, uncoated coating
GF53111663Tungsten
insulated wire, 1m, conductor diameter 0.075mm, insulation thickness 0.02mm, PTFE (polytetrafluoroethylene) insulation, 99.9%
GF53112158Tin
foil, thickness 0.007 mm, size 25 × 25 mm, purity 99.95%
GF53122036Iron
foil, 15mm disks, thickness 0.004mm, 99.85%
GF53122508Polychlorotrifluoroethylene
(PCTFE), rod, diam. 7 mm, L 1000 mm, natural
GF53125826Polypropylene
(PP), film, thickness 0.01 mm, L 1 m, condition biaxially oriented
GF53130945Tungsten
foil, 5m coil, thickness 0.05mm, coil width .51mm, as rolled, 99.95%
GF53130978Silver
foil, 25x25mm, thickness 0.5mm, as rolled, 99.99+%
GF53131047Aluminum
foil, thickness 0.15 mm, size 300 × 300 mm, purity 99%
GF53132330Copper - O.F.H.C.
foil, 50mm disks, thickness 0.075mm, half hard, 99.95+%
GF53139180Monel® alloy 400, Ni65Cu33Fe2
foil, 1m coil, 0.030mm thickness, annealed
GF53141060Germanium
lump, 25 mm max. lump size, weight 50 g, purity 99.999%
GF53143804Fluorinated Ethylene Propylene Copolymer
(FEP), rod, diam. 9.5 mm, L 300 mm
GF53150790Copper
foil, thickness 0.125 mm, length 10 m, coil width 50.8 mm
GF53163424Nickel
foil, not light tested, 100x100mm, thickness 0.01mm, 99.95%
GF53164650Indium
foil, not light tested, 25x25mm, thickness 0.003mm, temporary acrylic support, 99.8%
GF53165943Copper/nickel
foil, Cu 70%/Ni 30%, thickness 0.016 mm, length 1 m, coil width 192 mm
GF53167248Polytetrafluoroethylene
(PTFE), powder, mean particle size 6-9micron, weight 200 g
GF53167608Polymethylmethacrylate
(PMMA, ACRYLIC), sheet, thickness 1 mm, size 200 × 200 mm, clear
GF53170084Polyamide - Nylon 6, 6
(PA 6,6), sheet, thickness 1 mm, size 500 × 500 mm

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top