Advanced Search

ALDRICH Brand

Displaying 43451-43500 of 67453 results.
Sigma Cat.No.Description
GF59032481Tungsten
insulated wire, 5m, conductor diameter 0.0125mm, insulation thickness 0.0035mm, polyimide insulation, 99.9%
GF59041740Molybdenum
mesh, 150x150mm, nominal aperture 0.44mm, wire diameter 0.07mm, 50 wires/inch, open area 67%, plain weave mesh
GF59043742Gold
foil, thickness 0.05 mm, 6 mm diameter, purity 99.95%
GF59051752Platinum-rhodium alloy, Pt90Rh10
20m wire, 0.025mm diameter, annealed
GF59055611Tantalum
foil, 6mm disks, thickness 0.25mm, annealed, 99.9%
GF59056409Copper
foil, thickness 0.0076 mm, length 10 m, coil width 6 mm
GF59059895Iron
rod, 200mm, diameter 6.35mm, as drawn, soft ingot 99.8%
GF59060875Polycarbonate
(PC), sheet, thickness 2 mm, size 300 × 300 mm, clear
GF59063474Iron
rod, 4 mm diameter, length 100 mm, purity 98+%
GF59064554Stainless Steel - AISI 304 alloy, FeCr18Ni10
100mm rod, 25mm diameter, as drawn
GF59067951Lead
lump, 5 mm max. lump size, weight 20 g, high purity 99.999%
GF59070405Invar® - Controlled Expansion Alloy, Fe64Ni36
500mm rod, 3.2mm diameter
GF59070887Lead
foil, 100x100mm, thickness 0.5mm, as rolled, 99.99+%
GF59072025Nickel silver alloy, Cu62Ni18Zn20
200mm tube, 1.3mm outside diameter, 0.275mm wall thickness, 0.75mm inside diameter, as drawn
GF59072575Molybdenum
foil, 15mm disks, thickness 0.009mm, 99.9%
GF59073217Lead
foil, not light tested, 100x100mm, thickness 0.02mm, 99.99+%
GF59076894Tantalum
foil, 25x25mm, thickness 0.100mm, annealed, 99.9%
GF59077794Aluminum-magnesium alloy, Al97Mg3
foil, 50 x 50mm, 0.06mm thickness, as rolled, light tight (lt)
GF59078964Copper-beryllium alloy, Cu98Be2
foil, 6mm disks, 0.02mm thickness, half hard
GF59079707Iron boride
lump, 10 mm max. lump size, weight 20 g
GF59084477Zinc
foil, 10mm disks, thickness 0.175mm, as rolled, 99.95+%
GF59090485Nickel
foil, 8mm disks, thickness 0.1mm, annealed, 99%
GF59092465Tungsten
foil, not light tested, 25x25mm, thickness 0.005mm, 99.95%
GF59093174Tin
rod, 100mm, diameter 2.0mm, extruded, 99.75%
GF59095031Constantan - resistance alloy, Cu55Ni45
insulated wire, 200m length, 0.05mm conductor diameter, 0.005mm insulation thickness, polyimide insulation
GF59105189Titanium
foil, thickness 0.02 mm, 4 mm diameter, purity 99.6+%
GF59120636Phosphor bronze alloy, Cu94Sn6
foil, 150 x 150mm, 0.025mm thickness, as rolled, light tight (lt)
GF59124292Nickel/Iron
rod, Ni52%/Fe 48%, 3 mm diameter, length 100 mm
GF59129826Tantalum
tube, 100mm, outside diameter 3.5mm, inside diameter 3.1mm, wall thickness 0.2mm, as drawn, 99.9%
GF59137904Aluminum
foil, thickness 1.0 mm, size 25 × 25 mm, purity 99%
GF59142528Tin
rod, 500mm, diameter 25.0mm, extruded, 99.75%
GF59142708Silver
foil, 25x25mm, thickness 0.125mm, as rolled, 99.95+%
GF59145127Manganin® - resistance alloy, Cu86Mn12Ni2
foil, 200 x 300mm, 0.02mm thickness, as rolled, light tight (lt)
GF59145813T1 - thermocouple alloy, Ni90Cr10
50m wire, 0.25mm diameter, annealed
GF59147196Aluminum-silicon alloy, Al88Si12
foil, 100 x 100mm, 2.0mm thickness
GF59147310Lead
wire reel, 1m, diameter 0.75mm, as drawn, 99.99+%
GF59147523Monel® alloy 400, Ni65Cu33Fe2
foil, 15mm disks, 0.12mm thickness, annealed
GF59150561Molybdenum
foil, light tested, 25x25mm, thickness 0.008mm, 99.9%
GF59152350Polyethylene Terephthalate
(polyester, PET, PETP), sheet, thickness 1 mm, size 600 × 600 mm, condition amorphous
GF59159223Tin
foil, 100x100mm, thickness 1.0mm, as rolled, 99.99+%
GF59160584Nickel-chromium alloy, Ni80Cr20
1000m wire, 0.25mm diameter, hard
GF59168166Nickel-iron alloy, Ni70Fe30
5m insulated wire, 0.025mm conductor diameter, 0.0035mm insulation thickness, polyimide insulation
GF59168201Tungsten
wire reel, 50m, diameter 0.0075mm, hard, 99.95%
GF59168593Molybdenum
rod, 500mm, diameter 10.0mm, centerless ground, 99.9%
GF59170608Vanadium
rod, 8.0 mm diameter, length 50 mm, purity 99.8%
GF59178426Cobalt-chromium alloy, Co86Cr14
powder, 150micron max. particle size, atomized, 100g
GF59179539Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 300 x 300mm, 0.125mm thickness, annealed
GF59182612Polyimide
(PI), laminate, thickness 0.1 mm, size 100 × 100 mm, polymer thickness 0.05mm
GF59183545Zinc
foil, 25mm disks, thickness 1.0mm, as rolled, 99.95+%
GF59189338Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 4mm disks, 0.2mm thickness, annealed

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top