Advanced Search

ALDRICH Brand

Displaying 49101-49150 of 67453 results.
Sigma Cat.No.Description
GF87616851Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
powder, 45micron max. particle size, 100g
GF87620328Iron
rod, 500mm, diameter 30mm, as drawn, 98+%
GF87635290Tin
foil, light tested, 25x25mm, thickness 0.025mm, as rolled, 99.95%
GF87638462Tungsten
wire, straight, 1000mm, diameter 0.25mm, 99.9+%
GF87641231T2 - thermocouple alloy, Ni95(Al+Mn+Si)5
foil, 0.5m coil, 100mm coil width, 0.25mm thickness, annealed
GF87641387Silicon carbide - reaction bonded
tube, outside diameter 15.0 mm, length 150 mm, wall thickness 4.0 mm
GF87653571Magnetic shielding alloy, Ni77Fe14Cu5Mo4
foil, 6mm disks, 0.0125mm thickness
GF87663303Nickel
tube, 1000mm, outside diameter 2.5mm, inside diameter 2mm, wall thickness 0.25mm, hard, 99.5%
GF87664450Polyamide - Nylon 12
(PA 12), powder, max. particle size 50micron, weight 1000 g, min. particle size 10micron
GF87666137Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 300 x 300mm, 0.05mm thickness, annealed, light tight (lt)
GF87668421Zinc
foil, 4mm disks, thickness 0.25mm, as rolled, 99.99+%
GF87671784Nickel
foil, light tested, 300x300mm, thickness 0.015mm, 99.9%
GF87674327Zinc
foil, 25mm disks, thickness 0.25mm, as rolled, 99.95+%
GF87677915Tungsten
foil, 1m coil, thickness 0.08mm, coil width .9mm, as rolled, 99.95%
GF87685330Polyvinylchloride - Unplasticized
(UPVC), film, thickness 0.2 mm, diam. 12.7 mm, clear
GF87685352Vanadium
foil, thickness 0.008 mm, size 50 × 50 mm, purity 99.8%
GF87686173Platinum
foil, 30x30mm, thickness 0.2mm, as rolled, 99.95%
GF87686588Polyimide
(PI), laminate, thickness 0.05 mm, size 300 × 300 mm, polymer thickness 0.025mm
GF87706402Gadolinium
foil, thickness 0.5 mm, size 50 × 50 mm, purity 99%
GF87716874Nickel
tube, outside diameter 0.5 mm, length 100 mm, wall thickness 0.05 mm
GF87716997Titanium
rod, 100mm, diameter 16mm, as drawn, 99.99+%
GF87725177Niobium
foil, thickness 0.30 mm, length 0.5 m, purity 99.9%
GF87731545Niobium
wire reel, 5m, diameter 1.0mm, annealed, 99.9%
GF87733299Copper
foil, thickness 0.038 mm, size 150 × 150 mm, purity 99.9%
GF87736405Iron
foil, thickness 0.9 mm, size 100 × 100 mm, purity 99.5%
GF87737158Stainless Steel - AISI 316L alloy, FeCr18Ni10Mo3
foil, 150 x 150mm, 0.38mm thickness, annealed
GF87742659Rhodium
foil, not light tested, 25x25mm, thickness 0.001mm, permanent polyester support, 99.85%
GF87748228Alumina
rod, 15.0 mm diameter, length 100 mm
GF87759680Polyethylene Terephthalate
(polyester, PET, PETP), film, thickness 0.0035 mm, L 0.5 m, coil width 490 mm
GF87764013Antimony
microfoil, 25x25mm, thinness 0.5μm, specific density 334.5μg/cm2, 6 micron aluminum permanent support, 95+%
GF87768051Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8
foil, 50mm disks, 0.2mm thickness, annealed
GF87768949Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
10m insulated wire, 0.05mm conductor diameter, 0.003mm insulation thickness, polyester insulation
GF87775262Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8
100mm tube, 1.5mm outside diameter, 0.25mm wall thickness, 1mm inside diameter
GF87775374Nickel silver alloy, Cu62Ni18Zn20
100mm tube, 1.8mm outside diameter, 0.175mm wall thickness, 1.45mm inside diameter, as drawn
GF87775486Polybenzimidazole
(PBI), rod, diam. 38 mm, L 10 mm, black
GF87782732Tungsten
foil, 200x200mm, thickness 0.15mm, as rolled, 99.95%
GF87786040Gold
microfoil, disks, 10mm, thinness 0.75μm, specific density 1449μg/cm2, permanent mylar 3.5μm support, 99.99+%
GF87787221Platinum
tube, 200mm, outside diameter 0.4mm, inside diameter 0.1mm, wall thickness 0.15mm, as drawn, 99.95%
GF87789548Copper
foil, thickness 0.05 mm, length 20 m, coil width 30 mm
GF87794869Gold
wire, 0.33 mm diameter, length 1 m, purity 99.95%
GF87801723Dysprosium
powder, 5g, max. particle size 500 micron, 99.9%
GF87805020Chromium
foil, not light tested, 100x100mm, thickness 0.025mm, permanent polyester support, 99.99+%
GF87806144Molybdenum
washer, size m5, length 50 pcs, outside diameter 9.64 - 10.00mm
GF87814794Polycarbonate
(PC), metallized film, thickness 0.002 mm, L 5 m, ohms/square 4
GF87819339Nickel
tube, outside diameter 1.397 mm, length 200 mm, wall thickness 0.06 mm
GF87821916Iron
foil, 2m coil, thickness 0.25mm, hard, 99.5%
GF87824953Polytetrafluoroethylene
(PTFE), film, thickness 0.05 mm, L 10 m, tolerance 0.2
GF87829082Glass Sealing Alloy, Fe54Ni29Co17
foil, 200 x 520mm, 0.05mm thickness, annealed, flattened, light tight (lt)
GF87829677Silicon carbide
monofilament, 0.1 mm diameter, length 5 m, core tungsten 0.01mm diameter
GF87830714Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 2m coil, 0.025mm thickness, half hard

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top