Hydrocarbon Index-Kit acc. to DIN EN ISO 9377-2/H53
SIAL/68172
Synonym: DIN EN ISO 9377-2, Kit; H53-Kit
Product Type: Chemical
| application(s) | environmental |
| Quality Level | 100  |
| shelf life | limited shelf life, expiry date on the label |
| Application: | application test according EN ISO 9377- 2/H53 : in accordance The kit allows users to extract and analyze 20 water samples (2 series of 10 water samples) in duplicate. Recovery and Blank analysis should be run in duplicate after each series. The following solutions should be diluted as follows prior to use: 49574 - 1:10 with n-heptane 51706 - 1:10 with acetone (exact concentration should be a thousand times the desired application range) The water sample is extracted with an extracting agent. Polar substances are removed by clean up on Florisil®. The purified aliquot is analyzed by capillary chromatography using a non-polar column and a flame ionization detector. The total peak area between n-decane and n-tetracontane is measured. The concentration of mineral oil is quantified against and external standard consisting of two specified mineral oils, and the hydrocarbon oil index is calculated. |
| Legal Information: | Florisil is a registered trademark of U.S. Silica Company |
| Symbol |     GHS02,GHS07,GHS08,GHS09 |
| Signal word | Danger |
| Hazard statements | H225 - H304 - H315 - H336 - H351 - H410 |
| Precautionary statements | P202 - P210 - P273 - P301 + P310 - P303 + P361 + P353 - P331 |
| Hazard Codes | F,Xn,N |
| Risk Statements | 11-38-40-50/53-65-67 |
| Safety Statements | 16-36/37-61-62 |
| RIDADR | UN 3316 9 |
| Flash Point(F) | -0.4 °F |
| Flash Point(C) | -18 °C |
| UNSPSC | 41113319 |
| Components | Supelclean™ Florisil®/Na2SO4 SPE Tube, glass hardware, PTFE frit, bed A 2 g (Florisil®), bed B 2 g (Na2SO4), volume 6 mL, pk of 48 pk 48; Mineral oil standard mixture Type A and B for EN ISO 9377-2, analytical standard, ~10 mg/mL in heptane (exact content on the label) 10 mL; QC-Standard Solution for EN ISO 9377-2, analytical standard 1 mL; Extraction Medium Stock Solution, acc. to DIN EN ISO 9377-2 3 x 100 mL |