ACCUSPIN™ System-Histopaque®-1077
SIGMA/A0561 - sterile-filtered, density: 1.077 g/mL
MDL Number: MFCD01092091
Product Type: Chemical
application(s) | hematology histology |
density | 1.077 g/mL |
form | solution |
packaging | package of 100 tubes |
Quality Level | 400 |
shelf life | Expiry date on the label. |
sterility | aseptically filled |
storage temp. | 2-8°C |
Application: | ACCUSPIN System-HISTOPAQUE-1077 employs centrifuge tubes specially designed with two chambers separated by a porous high-density polyethylene barrier ("frit"). The lower chamber contains HISTOPAQUE-1077 which allows the addition of anticoagulated whole blood without risk of mixing with the separation medium. On centrifugation, the whole blood descends through the frit to contact with the HISTOPAQUE-1077 below the frit, giving a clear separation of the blood components. The erythrocytes aggregate and the granulocytes become slightly hypertonic, increasing their sedimentation rate, resulting in pelleting at the bottom of the ACCUSPIN tube. Lymphocytes and other mononuclear cells, i.e., monocytes, remain at the plasma-HISTOPAQUE-1077 interface. |
Application: | ACCUSPIN System-Histopaque-1077 is used for the separation of lymphocytes and other mononuclear cells from whole blood and bone marrow using density gradient separation media. Histopaque-1077 has been used for: • human lymphocyte antigen (HLA) typing • initial isolation step prior to the enumeration of T, B, and ‘null’ lymphocytes. • preparation of pure lymphocyte suspensions for cell culture and cytotoxicity assays. • isolation and purification of peripheral blood mononuclear cells (PBMCs) and bone marrow mononuclear cells (BMMCs)citation • isolation of human lymphocytescitation • isolation of breast cancer circulating tumor cells (CTCs) from the whole bloodcitation |
Features and Benefits: | ACCUSPIN™ System-Histopaque®-1077 offers numerous advantages, such as: • Optimal recovery of viable cells • Permits selective separation of blood cell types • Prevents cell distortion • Preserves cell viability • Minimal extraneous cell interference • Reproducible performance from batch to batch • Histopaque is sterile-filtered and endotoxin-tested • Stable at 2-8°C for at least 2 years when protected from light |
General description: | ACCUSPIN System-Histopaque-1077 products are intended for use in the isolation of lymphocytes and other mononuclear cells. The separation medium, Histopaque-1077, is a sterile-filtered, endotoxin-tested solution of polysucrose and sodium diatrizoate, adjusted to a density of 1.077 g/mL. ACCUSPIN System-HISTOPAQUE-1077 employs γ-irradiated 50 mL polypropylene centrifuge tubes specially designed with two chambers separated by a porous high-density polyethylene barrier ("frit"). Each tube is aseptically filled with 15 mL of Histopaque 1077. Each tube will separate 15-30 mL of anticoagulated blood. |
Legal Information: | Accuspin is a trademark of Sigma-Aldrich Co. LLC |
Legal Information: | Histopaque is a registered trademark of Merck KGaA, Darmstadt, Germany |
Principle: | The lower chamber contains HISTOPAQUE-1077 which allows the addition of anticoagulated whole blood without risk of mixing with the separation medium. On centrifugation, the whole blood descends through the frit to contact with the HISTOPAQUE-1077 below the frit, giving a clear separation of the blood components. The erythrocytes aggregate and the granulocytes become slightly hypertonic, increasing their sedimentation rate, resulting in pelleting at the bottom of the ACCUSPIN tube. Lymphocytes and other mononuclear cells, i.e., monocytes, remain at the plasma-HISTOPAQUE-1077 interface. |
Symbol | GHS08 |
Signal word | Danger |
Hazard statements | H317 - H334 |
Precautionary statements | P261 - P280 - P342 + P311 |
Hazard Codes | Xn |
Risk Statements | 42/43 |
Safety Statements | 23-24-37-45-60 |
RIDADR | NONH for all modes of transport |
WGK Germany | WGK 3 |
Flash Point(F) | Not applicable |
Flash Point(C) | Not applicable |
Density | 1.077 g/mL |
Storage Temp. | 2-8°C |
UNSPSC | 12352207 |