Anti-ACAD10 Antibody, clone 3J20 ZooMAb® Rabbit Monoclonal
SIGMA/ZRB1828 - recombinant, expressed in HEK 293 cells
Product Type: Chemical
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human skeletal muscle (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1828, Anti-ACAD10, clone 3J20 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Cytoplasmic/membranous staining was observed in myocytes and capillary walls of human skeletal muscle tissue sections.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human skeletal muscle (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1828, Anti-ACAD10, clone 3J20 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Cytoplasmic/membranous staining was observed in myocytes and capillary walls of human skeletal muscle tissue sections.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human skeletal muscle (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1828, Anti-ACAD10, clone 3J20 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Cytoplasmic/membranous staining was observed in myocytes and capillary walls of human skeletal muscle tissue sections.
Western Blotting Enhanced Validation - Recombinant Antibody Technology L6 cell lysate was probed with Cat. No. ZRB1828, Anti-ACAD10, clone 3J20 ZooMAb® Rabbit Monoclonal (1:10,000 dilution). Proteins were visualized using a Donkey Anti-Rabbit IgG secondary antibody conjugated to HRP and a chemiluminescence detection system. Arrow indicates Acyl-CoA dehydrogenase family member 10 (~130 kDa).
Affinity Binding Assay Enhanced Validation - Recombinant Antibody Technology 100 mg/mL of non-specific control peptide (Run 1) or ACAD102 peptide (Run 2) were analyzed by affinity binding assay using Cat. No. ZRB1828, Anti-ACAD10, clone 3J20 ZooMAb® Rabbit Monoclonal. The binding of this antibody to ACAD10 peptide displayed a KD value of 1.0 x 10-12, whereas its binding to non-specific peptide displayed a KD of 1.4 x 10-3.
Flow Cytometry Enhanced Validation - Recombinant Antibody Technology Staining of one million L6 cells was performed using 0.1 μg of Cat. No. ZRB1828, Anti-ACAD10, clone 3J20 ZooMAb® Rabbit Monoclonal (Yellow histogram) or the equivalent amount of a Rabbit IgG isotype control (Grey histogram), followed by a PE-conjugated Donkey Anti-Rabbit IgG secondary antibody.
12 Principles of Green Chemistry: Principle 1—Waste Prevention. This product has a smaller environmental footprint through reduction of waste in the manufacturing process.
12 Principles of Green Chemistry: Principle 4—Designing Safer Chemicals
Chemical products should be designed to affect their desired function while minimizing their toxicity.
Chemical products should be designed to affect their desired function while minimizing their toxicity.
12 Principles of Green Chemistry: Principle 6—Design for Energy Efficiency. This product was re-engineered to utilize less energy in the manufacturing process.
| antibody form | purified antibody |
| antibody product type | primary antibodies |
| biological source | rabbit |
| clone | 3J20, monoclonal |
| recombinant monoclonal | |
| conjugate | unconjugated |
| enhanced validation | recombinant expression Learn more about Antibody Enhanced Validation  |
| form | lyophilized |
| greener alternative category | Aligned |
| greener alternative product characteristics | Waste Prevention Designing Safer Chemicals Design for Energy Efficiency Learn more about the Principles of Green Chemistry . |
| isotype | IgG |
| mol wt | calculated mol wt ~118.83 kDa |
| observed mol wt ~130 kDa | |
| packaging | antibody small pack of 25 μL |
| product line | ZooMAb® learn more |
| Quality Level | 200 |
| recombinant | expressed in HEK 293 cells |
| shipped in | ambient |
| species reactivity | rat, human |
| species reactivity (predicted by homology) | monkey |
| storage temp. | 2-8°C |
| technique(s) | affinity binding assay: suitable |
| flow cytometry: suitable | |
| immunohistochemistry (formalin-fixed, paraffin-embedded sections): suitable | |
| western blot: suitable | |
| UniProt accession no. | Q6JQN1  |
| Application: | Quality Control Testing Evaluated by Western Blotting in L6 cell lysate. Western Blotting Analysis: A 1:10,000 dilution of this antibody detected ACAD10 in L6 cell lysate. Tested Applications Affinity Binding Assay: A representative lot of this antibody bound ACAD10 peptide with a KD of 1.0 x 10-12 in an affinity binding assay. Flow Cytometry Analysis: 0.1 μg from a representative lot detected ACAD10 in one million L6 cells. Immunohistochemistry (Paraffin) Analysis: A 1:100 dilution from a representative lot detected ACAD10 in human skeletal muscle tissue sections. Note: Actual optimal working dilutions must be determined by end user as specimens, and experimental conditions may vary with the end user |
| Application: | Anti-ACAD10, clone 3J20 ZooMAb®, Cat. No. ZRB1828, is a recombinant Rabbit monoclonal antibody that specifically targets ACAD10 and is tested for use in Affinity Binding Assay, Flow Cytometry, Immunohistochemistry (Paraffin), and Western Blotting. |
| Disclaimer: | Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals. |
| General description: | We are committed to bringing you greener alternative products, which adhere to one or more of The 12 Principles of Green Chemistry.This antibody is Preservative-free, produced without the harm or sacrifice of animals and exceptionally stable to allow for ambient shipping and storage if needed and thus aligns with "Waste Prevention", "Designing Safer Chemicals" and "Design for Energy Efficiency". Click here for more information. |
| General description: | ZooMAb antibodies represent an entirely new generation of recombinant monoclonal antibodies. Each ZooMAb antibody is manufactured using our proprietary recombinant expression system, purified to homogeneity, and precisely dispensed to produce robust and highly reproducible lot-to-lot consistency. Only top-performing clones are released for use by researchers. Each antibody is validated for high specificity and affinity across multiple applications, including its most commonly used application. ZooMAb antibodies are reliably available and ready to ship when you need them. |
| Immunogen: | KLH-conjugated linear peptide corresponding to 18 amino acids from the C-terminal half of human Acyl-CoA dehydrogenase family member 10 (ACAD10). |
| Legal Information: | ZooMAb is a registered trademark of Merck KGaA, Darmstadt, Germany |
| Physical form: | Purified recombinant mouse monoclonal antibody IgG, lyophilized in PBS, 5% Trehalose, normal appearance a coarse or translucent resin. Contains no biocide or preservatives, such as azide, or any animal by-products. Larger pack sizes provided as multiples of 25 μL. |
| Reconstitution: | 300 μg/mL after reconstitution at 25 μL per vial. Please refer to guidance on suggested starting dilutions and/or titers per application and sample type. |
| Specificity: | Clone 3J20 is a ZooMAb® rabbit recombinant monoclonal antibody that specifically detects Acyl-CoA dehydrogenase family member 10 (ACAD10). It targets an epitope within 18 amino acids from the C-terminal half. |
| Storage and Stability: | Recommend storage of lyophilized product at 2-8°C; Before reconstitution, micro-centrifuge vials briefly to spin down material to bottom of the vial; Reconstitute each vial by adding 25 μL of filtered lab grade water or PBS; Reconstituted antibodies can be stored at 2-8°C, or -20°C for long term storage. Avoid repeated freeze-thaws. |
| Target description: | Acyl-CoA dehydrogenase family member 10 (UniProt: Q6JQN1; also known as ACAD-10) is encoded by the ACAD10 gene (Gene ID: 80724) in human. Acyl-CoA dehydrogenases (ACADs) are a family of flavoproteins that are involved in the beta-oxidation of the fatty acyl-CoA derivatives to generate acetyl CoA and reducing equivalents for generating energy. ACAD-10 is a widely expressed mitochondrial matrix enzyme. Its high expression has been reported in fetal brain. It is also highly expressed in liver, kidney, pancreas, and spleen. It contains a hydrolase domain at the N-terminal region, a serine/threonine protein kinase catalytic domain in the central region, and a conserved ACAD domain in the C-terminal region. It catalyzes the mitochondrial beta-oxidation of fatty acyl-CoA derivatives. Variations in ACAD10 gene have been linked to increased susceptibility to Type II diabetes, which may be mediated by impaired insulin sensitivity and abnormal lipid oxidation. Mice deficient in ACAD10 display abnormal glucose tolerance and elevated insulin levels. They accumulate excess abdominal fat, develop early liver inflammation, and have abnormal skeletal muscle mitochondria. This ZooMAb® recombinant monoclonal antibody, generated by our propriety technology, offers significantly enhanced specificity, affinity, reproducibility, and stability over conventional monoclonals. (Ref.: Bian, L., et al. (2010). Diabetologia. 53(7); 1349-1353; He, M., et al. (2011). Mol. Genet. Metab. 102(4); 418-429; Bloom, K., et al., (2017). J. Inhert. Metab. Dis. 41(1); 49-57). |
| WGK Germany | WGK 1 |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| Storage Temp. | 2-8°C |