Advanced Search



Anti-CD5 Antibody, clone 1C19 Antibody, ZooMAb® Rabbit Monoclonal

SIGMA/ZRB2330 - recombinant, expressed in HEK 293 cells

Synonym: T-cell surface glycoprotein CD5;Lymphocyte antigen T1/Leu-1

Product Type: Chemical

Catalog Number PKG Qty. Price Quantity
45-ZRB2330-25UL
$223.00
1/EA
Add To Favorites
45-ZRB2330-4X25UL
$460.00
1/EA
Add To Favorites
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human tonsil (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:1,000 dilution of Cat. No. ZRB2330, Anti-CD5, clone 1C19, ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Membranous staining in both germinal center & non-germinal center cells of human tonsil.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human tonsil (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:1,000 dilution of Cat. No. ZRB2330, Anti-CD5, clone 1C19, ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Membranous staining in both germinal center & non-germinal center cells of human tonsil.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human tonsil (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:1,000 dilution of Cat. No. ZRB2330, Anti-CD5, clone 1C19, ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Membranous staining in both germinal center & non-germinal center cells of human tonsil.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of Jurkat cells was performed using a 1:100 dilution of Cat. No. ZRB2330, Anti-CD5, clone 1C19, ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488 (Green). Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the cell membrane.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of Jurkat cells was performed using a 1:100 dilution of Cat. No. ZRB2330, Anti-CD5, clone 1C19, ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488 (Green). Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the cell membrane.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of Jurkat cells was performed using a 1:100 dilution of Cat. No. ZRB2330, Anti-CD5, clone 1C19, ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488 (Green). Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the cell membrane.
Western Blotting Enhanced Validation - Recombinant Antibody Technology Jurkat cell lysate was probed with Cat. No. ZRB2330, Anti-CD5, clone 1C19, ZooMAb® Rabbit Monoclonal (1:1,000 dilution). Proteins were visualized using a Donkey Anti-Rabbit IgG secondary antibody conjugated to HRP and a chemiluminescence detection system. Arrow indicates CD5 (~55 kDa).
Affinity Binding Assay Enhanced Validation - Recombinant Antibody Technology 100 mg/mL of non-specific control peptide (Run 1) or CD5 peptide (Run 2) were analyzed by affinity binding assay using Cat. No. ZRB2330, Anti-CD5, clone 1C19, ZooMAb® Rabbit Monoclonal. The binding of this antibody to CD5 peptide displayed a KD of 1.0 x 10-12, whereas binding to non-specific control peptide displayed a KD of 1.4 x 10-5.
12 Principles of Green Chemistry: Principle 1—Waste Prevention.  This product has a smaller environmental footprint through reduction of waste in the manufacturing process.
12 Principles of Green Chemistry: Principle 4—Designing Safer Chemicals
Chemical products should be designed to affect their desired function while minimizing their toxicity.
12 Principles of Green Chemistry: Principle 6—Design for Energy Efficiency.  This product was re-engineered to utilize less energy in the manufacturing process.

 

antibody form purified antibody
antibody product type primary antibodies
biological source rabbit
clone 1C19, recombinant monoclonal
conjugate unconjugated
description recombinant, expressed in HEK 293 cells
enhanced validation recombinant expression
Learn more about Antibody Enhanced Validation 
epitope sequence N-terminal
form lyophilized
greener alternative category Aligned 
greener alternative product characteristics Waste Prevention
Designing Safer Chemicals
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry .
isotype IgG
mol wt calculated mol wt 54.58 kDa
  observed mol wt ~55 kDa
packaging antibody small pack of 25 μL
product line ZooMAb® learn more 
Protein ID accession no. NP_055022.2? 
purified by using Protein A
Quality Level 200 
recombinant expressed in HEK 293 cells
shipped in ambient
species reactivity human
storage temp. 2-8°C
technique(s) affinity binding assay: suitable
  immunocytochemistry: suitable
  immunohistochemistry (formalin-fixed, paraffin-embedded sections): suitable
  western blot: suitable
UniProt accession no. P06127 
Application: Quality Control Testing

Evaluated by Western Blotting in Jurkat cell lysate.

Western Blotting Analysis: A 1:1,000 dilution of this antibody detected CD5 in Jurkat cell lysate.

Tested applications

Immunohistochemistry (Paraffin) Analysis: A 1:1,000 dilution from a representative lot detected CD5 in human tonsil tissue sections.

Immunocytochemistry Analysis: A 1:100 dilution from a representative lot detected CD5 in Jurkat cells..

Affinity Binding Assay: A representative lot of this antibody bound CD5 peptide with a KD of 1.0 x 10-12 in an affinity binding assay.

Note: Actual optimal working dilutions must be determined by end user as specimens, and experimental conditions may vary with the end user
Disclaimer: Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
General description: We are committed to bringing you greener alternative products, which adhere to one or more of The 12 Principles of Green Chemistry.This antibody is Preservative-free, produced without the harm or sacrifice of animals and exceptionally stable to allow for ambient shipping and storage if needed and thus aligns with "Waste Prevention", "Designing Safer Chemicals" and "Design for Energy Efficiency". Click here  for more information.
General description: ZooMAb® antibodies represent an entirely new generation of recombinant monoclonal antibodies.Each ZooMAb® antibody is manufactured using our proprietary recombinant expression system, purified to homogeneity, and precisely dispensed to produce robust and highly reproducible lot-to-lot consistency. Only top-performing clones are released for use by researchers. Each antibody is validated for high specificity and affinity across multiple applications, including its most commonly used application. ZooMAb® antibodies are reliably available and ready to ship when you need them.
Immunogen: KLH-conjugated linear peptide corresponding to 19 amino acids from the N-terminal, extracellular domain of human CD5.
Legal Information: ZooMAb is a registered trademark of Merck KGaA, Darmstadt, Germany
Physical form: Purified recombinant rabbit monoclonal antibody IgG, lyophilized in PBS, 5% Trehalose, normal appearance a coarse or translucent resin. The PBS/trehalose components in the ZooMAb formulation can have the appearance of a semi-solid (bead like gel) after lyophilization. This is a normal phenomenon. Please follow the recommended reconstitution procedure in the data sheet to dissolve the semi-solid, bead-like, gel-appearing material. The resulting antibody solution is completely stable and functional as proven by full functional testing. Contains no biocide or preservatives, such as azide, or any animal by-products. Larger pack sizes provided as multiples of 25 μL.
Reconstitution: 300 μg/mL after reconstitution at 25 μL per vial. Please refer to guidance on suggested starting dilutions and/or titers per application and sample type.
Specificity: Clone 1C19 is a ZooMAb® Rabbit recombinant monoclonal antibody that specifically detects Human CD5. It targets an epitope within 19 amino acids from the N-terminal, extracellular domain.
Storage and Stability: Recommend storage of lyophilized product at 2-8°C; Before reconstitution, micro-centrifuge vials briefly to spin down material to bottom of the vial; Reconstitute each vial by adding 25 μL of filtered lab grade water or PBS; Reconstituted antibodies can be stored at 2-8°C, or -20°C for long term storage. Avoid repeated freeze-thaws.
Target description: T-cell surface glycoprotein CD5 (UniProt: P06127; also known as Lymphocyte antigen T1/Leu-1, CD5) is encoded by the CD5 (also known as LEU1) gene (Gene ID: 921) in human. CD5 is a single-pass type I membrane protein that is synthesized with a signal peptide (aa 1-24), which is subsequently cleaved off to produce the mature form that contains an extracellular domain (aa 25-372), a transmembrane domain (aa 373-402), and a cytoplasmic domain (aa 403-495). The extracellular region contains three scavenger receptor cysteine rich (SRCR) domains. CD5 is expressed on the surface of all T cells bearing the β heterodimer T cell receptor (TCR) but is absent or present at lower density on the T cell subset. It is involved in the regulation of T cell function and proliferation. It is also detected on a subset of B cells, specifically the B1 cells. However, B cells usually express two-to-five-fold fewer CD5 molecules per cell than T cells. In B cells, CD5 promotes constitutive activation of pERK1/2 in a calcium-dependent manner and involves the non-selective TRPC1 channel. In the C-terminal region, CD5 contains four tyrosine residues that can be phosphorylated by Lyn kinase to create binding sies for SHP-1 (PTPN6). CD5 is shown to be constitutively associated with SHP-1 and their interaction increases upon TCR stimulation. In mature, peripheral T cells, CD5 is present in lipid rafts of the T cell surface, where it promotes CD3 redistribution into rafts, which upregulates the activation of ZAP-70, linker for activation of T cells (LAT), and Ca2+ influx. This ZooMAb® recombinant monoclonal antibody, generated by our propriety technology, offers significantly enhanced specificity, affinity, reproducibility, and stability over conventional monoclonals. (Ref.: Voisinne, G., et al. (2018). Front. Immunol. 9; 2900; Garaud, S., et al. (2018). Cell. Mol. Immunol. 15(2); 158-170).
WGK Germany WGK 1
Flash Point(F) Not applicable
Flash Point(C) Not applicable
Storage Temp. 2-8°C

The following items have been added to your cart:

Choose a favorite list for this item:

Catalog Number Description Price
$

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top