Advanced Search

aldrich Brand

Displaying 29701-29750 of 67770 results.
Sigma Cat.No.Description
GF05942987Polyimide
(PI), laminate, thickness 0.06 mm, L 1 m, polymer thickness 0.025mm
GF05952203Copper
foil, thickness 0.1 mm, length 5 m, coil width 16 mm
GF05952933Copper/Beryllium
rod, Cu 98%/Be 2%, 25 mm diameter, length 200 mm, temper hard
GF05962765Carbon - Vitreous
rod, 100mm, diameter 5.0mm, glassy carbon
GF05966590Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb
foil, 25 x 25mm, 0.075mm thickness, as rolled, light tight (lt)
GF05977558Cobalt
rod, 6.35 mm diameter, length 25 mm, purity 99.9%
GF05980754Nickel
tube, 500mm, outside diameter 0.8mm, inside diameter 0.3mm, wall thickness 0.25mm, as drawn, 99.5%
GF05983139Fecralloy - Iron-Chromium, Fe72.8Cr22Al5Y0.1Zr0.1
500mm tube, 15mm outside diameter, 1.5mm wall thickness, 12mm inside diameter
GF05985300Silver
foil, not light tested, 50x50mm, thickness 0.006mm, 99.97%
GF05987919Titanium-aluminum-vanadium alloy, Ti90Al6V4
5m wire, 1.0mm diameter, annealed
GF05990621Tungsten
foil, 0.1m coil, thickness 0.076mm, coil width 2mm, as rolled, 99.95%
GF05991420Molybdenum
wire reel, 10m, diameter 0.30mm, annealed, 99.95%
GF05998168Stainless Steel - 17-7PH alloy, FeCr17Ni7
foil, 1m coil, 0.05mm thickness, as rolled - condition c, precipitation hardenable
GF05999608Iron
foil, thickness 1.63 mm, size 150 × 150 mm, purity 99.5%
GF06001603Cobalt-chromium-iron-nickel-molybdenum-manganese alloy, Co40Cr20Fe15Ni15Mo7Mn2CBe
5m wire, 1.0mm diameter, hard
GF06003100Titanium
tube, 100mm, outside diameter 9.5mm, inside diameter 8.2mm, wall thickness 0.65mm, annealed, 99.6+%
GF06004145Brass alloy, Cu63Zn37
100m wire, 0.5mm diameter, hard
GF06006428Tungsten
foil, 1m coil, thickness 0.05mm, coil width 1.5mm, as rolled, 99.95%
GF06014270Nickel-chromium alloy, Ni80Cr20
1000m wire, 0.30mm diameter, annealed
GF06016261Polyethylene Terephthalate
(polyester, PET, PETP), metallized film, thickness 0.036 mm, size 150 × 150 mm, ohms/square 200
GF06023067Tungsten
foil, 0.5m coil, thickness 0.035mm, coil width 1.5mm, as rolled, 99.95%
GF06025205Copper
foil, thickness 0.125 mm, length 5 m, coil width 50.8 mm
GF06028781Nickel-chromium alloy, Ni80Cr20
1000mm rod, 12.0mm diameter
GF06029748Zirconium
foil, 6mm disks, thickness 0.0125mm, 99.2%
GF06032719Titanium-silicon alloy, Ti92Si8
powder, 425micron max. particle size, alloy pre-cursor, 100g, 150micron
GF06041775Lead
foil, not light tested, 50x50mm, thickness 0.01mm, 99.99+%
GF06047917Copper
foil, thickness 0.068 mm, size 25 × 25 mm, purity 99.95%
GF06050146Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 150 x 150mm, 0.015mm thickness, as rolled, light tight (lt)
GF06053857Aluminum
foil, thickness 0.32 mm, 10 mm diameter, high purity 99.999%
GF06058177Copper
foil, thickness 0.0076 mm, length 2 m, coil width 6 mm
GF06067829Invar® - Controlled Expansion Alloy, Fe64Ni36
5m wire, 1.5mm diameter, annealed
GF06068763Copper - O.F.H.C.
tube, 100mm, outside diameter 1.23mm, inside diameter 0.51mm, wall thickness 0.36mm, 99.95+%
GF06074120Aluminum
wire reel, 0.5m, diameter 1.0mm, as drawn, 99.999%
GF06077853Titanium
foil, thickness 0.0025 mm, size 50 × 50 mm, purity 99.6+%
GF06078427Silver
insulated wire, 2m, conductor diameter 0.05mm, insulation thickness 0.0075mm, polyester insulation, 99.99%
GF06082286Titanium
microfoil, disks, 10mm, thinness 1.0μm, specific density 429μg/cm2, permanent mylar 3.5μm support, 99.6+%
GF06086369Copper
foil, thickness 0.022 mm, length 50 m, coil width 6.5 mm
GF06089474Titanium
foil, thickness 0.004 mm, 8 mm diameter, purity 99.6+%
GF06099666Carbon
rod, 150mm, diameter 50mm, graphite, 99.95%
GF06102313Molybdenum
foil, thickness 2.0 mm, size 20 × 20 mm, purity 99.9%
GF06105743Platinum
rod, 50mm, diameter 1.0mm, 99.95%
GF06128883Praseodymium
rod, 50mm, diameter 6.35mm, cast, 99%
GF06129389Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8
foil, 15mm disks, 0.075mm thickness, annealed
GF06131382Monel® alloy 400, Ni65Cu33Fe2
200mm tube, 2.57mm outside diameter, 0.15mm wall thickness, 2.27mm inside diameter, as drawn
GF06132068Cellulose Acetate
(CA), film, thickness 0.035 mm, L 5 m, black
GF06132563Tungsten-rhenium alloy, W97Re3
200m wire, 0.01mm diameter, as drawn
GF06133711Polyethylene Terephthalate
(polyester, PET, PETP), metallized film, thickness 0.005 mm, L 10 m, coil width 315 mm
GF06136826Stainless Steel - AISI 430 alloy, Fe81Cr17MnSiCSP
foil, 1m coil, 0.15mm thickness, annealed
GF06140629Tungsten-rhenium alloy, W75Re25
1m wire, 0.35mm diameter, annealed
GF06141170Polymethylpentene
TPX®, rod, diam. 12.7 mm, L 400 mm, natural

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top