aldrich Brand
Displaying 30751-30800 of 67770 results.
| Sigma Cat.No. | Description |
|---|---|
| GF10195646 | Zinc foil, 50x50mm, thickness 0.15mm, as rolled, 99.95+% |
| GF10199369 | Copper foil, thickness 0.01 mm, 10 mm diameter, purity 99.9% |
| GF10204209 | Polyvinylidenefluoride (PVDF), film, thickness 0.125 mm, L 2 m |
| GF10205873 | Invar® - controlled expansion alloy foil, Fe 64%/Ni 36%, thickness 0.25 mm, length 2 m, coil width 50 mm |
| GF10209204 | Lead wire reel, 5m, diameter 1.0mm, as drawn, 99.99+% |
| GF10211814 | Polysulfone (PSU), rod, diam. 30 mm, L 500 mm, natural |
| GF10214413 | Copper foil, thickness 0.05 mm, length 20 m, purity 99.9% |
| GF10218024 | Copper foil, thickness 0.1 mm, length 1 m, coil width 16 mm |
| GF10223558 | Copper foil, thickness 0.0005 mm, size 25 × 25 mm, purity 99.97% |
| GF10226067 | Aluminum foil, thickness 0.25 mm, 50 mm diameter, purity 99% |
| GF10226731 | Molybdenum high temperature alloy tzm, Mo99Ti0.5Zr0.1 rod, 100mm x 20.0mm diameter |
| GF10230837 | Tin foil, 0.5m coil, thickness 0.05mm, as rolled, 99.99+% |
| GF10235405 | Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 300 x 300mm, 3.0mm thickness, annealed |
| GF10241413 | Aluminum alloy 5251 foil, Al 97.7%/Mg 2%/Mn 0.3%, thickness 1.5 mm, size 150 × 150 mm, condition mirror polished on both sides |
| GF10247846 | Polymethylpentene TPX®, rod, diam. 36.9 mm, L 100 mm, natural |
| GF10251009 | Silver foil, 10mm disks, thickness 0.125mm, as rolled, 99.99+% |
| GF10251582 | Cobalt foil, 10mm disks, thickness 0.05mm, as rolled, 99.99+% |
| GF10253179 | Copper - O.F.H.C. foil, 25mm disks, thickness 0.7mm, half hard, 99.95+% |
| GF10254798 | Tin foil, 10mm disks, thickness 0.5mm, as rolled, 99.99+% |
| GF10255902 | Nickel wire reel, 50m, diameter 0.05mm, as drawn, 99% |
| GF10267174 | Copper insulated wire, 10m, conductor diameter 1.0mm, insulation thickness 0.25mm, PTFE (polytetrafluoroethylene) insulation |
| GF10270066 | Lead foil, 4mm disks, thickness 0.125mm, as rolled, 99.95% |
| GF10275869 | Waspaloy - heat resisting alloy, Ni58Cr19Co14MoTiAlFe foil, 150 x 150mm, 0.025mm thickness, as rolled, light tight (lt) |
| GF10280922 | Molybdenum foil, light tested, 100x100mm, thickness 0.008mm, 99.9% |
| GF10281721 | Zinc foil, 8mm disks, thickness 0.01mm, 99.9% |
| GF10287132 | Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb 20m wire, 0.25mm diameter, annealed |
| GF10289886 | Magnesium foil, thickness 0.05 mm, 15 mm diameter, purity 99.9% |
| GF10292183 | Alumina sputtering target, thickness 6.35 mm, 76.2 mm diameter, purity 99.5% |
| GF10292688 | Aluminum alloy 3003 honeycomb, Al 98%/Mn 1%/Fe 0.5%/Si 0.5%, thickness 20 mm, size 600 × 600 mm, cell size 12.7 mm |
| GF10303726 | Polyetheretherketone (PEEK), tube, outside diameter 1.6mm, L 200 mm, wall thickness 0.675 mm |
| GF10306987 | Silver foil, 0.5m coil, thickness 0.05mm, annealed, 99.95+% |
| GF10316562 | Stainless Steel - AISI 302 alloy, FeCr18Ni8 foil, 150 x 150mm, 0.1mm thickness, hard |
| GF10316742 | Lead tube, 200mm, outside diameter 6.78mm, inside diameter 4.7mm, wall thickness 1.04mm, 99.9% |
| GF10317248 | Tetrafluoroethylene- (alkoxy vinyl ether), (pfa), film, thickness 0.052 mm, L 0.5 m |
| GF10323144 | Polystyrene - Conductive (high impact conductive polystyrene), sheet, thickness 1 mm, size 150 × 150 mm, black |
| GF10327676 | Constantan - resistance alloy, Cu55Ni45 foil, 50mm disks, 0.25mm thickness, as rolled |
| GF10336890 | Polyethylene - High Density (HDPE), sheet, thickness 25 mm, size 150 × 150 mm |
| GF10337138 | Nickel foil, not light tested, 100x100mm, thickness 0.0125mm, 99.9% |
| GF10339040 | Lead foil, not light tested, 300x300mm, thickness 0.05mm, as rolled, 97% (Sn 1.5%, Sb 1.5%) |
| GF10345801 | Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 40 x 300mm, 0.25mm thickness, annealed, flattened |
| GF10346644 | Iron foil, 2m coil, thickness 0.038mm, hard, 99.5% |
| GF10347746 | Copper wire reel, 0.1m, diameter 0.1mm, aluminum cladding, outside diameter 0.25mm, 99.9% |
| GF10349850 | Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 25mm disks, 0.5mm thickness, titanium nitride coating 2-3 microns surface treatment |
| GF10352180 | Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn foil, 6mm disks, 0.025mm thickness, as rolled |
| GF10355958 | Carbon - Vitreous foil, 25x25mm, thickness 0.5mm, glassy carbon |
| GF10361214 | Aluminum alloy 5019 wire, Al 95%/Mg 5%, 0.12 mm diameter, length 50 m, temper hard |
| GF10365779 | Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi rod, 100mm x 12.7mm diameter, annealed |
| GF10365803 | Hafnium foil, 25x25mm, thickness 0.25mm, annealed, 97% |
| GF10370618 | Nickel mesh, 30x30mm, nominal aperture 0.04mm, thickness 0.004mm, wire diameter 0.011mm, 500 wires/inch, open area 60%, electro-formed mesh, 99.9% |
| GF10371844 | Stainless Steel - AISI 316L alloy, FeCr18Ni10Mo3 foil, 15mm disks, 0.03mm thickness, annealed |