aldrich Brand
Displaying 31751-31800 of 67770 results.
| Sigma Cat.No. | Description |
|---|---|
| GF14126790 | Nickel-zirconium alloy, Ni70Zr30 powder, 150micron max. particle size, alloy pre-cursor, 200g |
| GF14128499 | Zinc foil, 0.5m coil, thickness 0.35mm, as rolled, 99.95+% |
| GF14131156 | Constantan - resistance alloy, Cu55Ni45 rod, 1000mm x 3.2mm diameter, annealed |
| GF14135138 | Phosphor bronze powder, Cu 94%/Sn 6%, max. particle size 150 micron, weight 100 g, condition alloy pre-cursor |
| GF14136959 | Gold-tin alloy, Au80Sn20 0.2m wire, 1.0mm diameter, as drawn |
| GF14145689 | Copper mesh, 600x600mm, nominal aperture 0.38mm, wire diameter 0.25mm, 40x40 wires/inch, open area 37%, plain weave mesh |
| GF14147759 | Constantan - resistance alloy, Cu55Ni45 foil, 8mm disks, 0.025mm thickness, as rolled |
| GF14148187 | Constantan- resistance alloy foil, Cu 55%/Ni 45%, thickness 0.2 mm, size 100 × 100 mm, temper as rolled |
| GF14151822 | Invar® - controlled expansion alloy foil, Fe 64%/Ni 36%, thickness 0.25 mm, length 10 m, coil width 50 mm |
| GF14165748 | Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 foil, 300 x 300mm, 0.5mm thickness, annealed |
| GF14165995 | Invar® - Controlled Expansion Alloy, Fe64Ni36 200mm tube, 2.2mm outside diameter, 0.16mm wall thickness, 1.88mm inside diameter |
| GF14167559 | Magnetic shielding alloy, Ni77Fe14Cu5Mo4 foil, 25mm disks, 0.1mm thickness, annealed |
| GF14167818 | Copper-beryllium alloy, Cu98Be2 5m wire, 0.25mm diameter, hard |
| GF14168033 | Nickel/ wire, Ni 80%/Fe15.5%/Mo 4.5, 0.5 mm diameter, length 50 m, temper as drawn |
| GF14172612 | Tungsten wire reel, 0.5m, diameter 0.25mm, clean, 99.95% |
| GF14175110 | Nickel foil, light tested, 25x25mm, thickness 0.025mm, 99.9% |
| GF14177291 | Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 100 x 100mm, 0.5mm thickness, annealed |
| GF14184198 | Copper-beryllium alloy, Cu98Be2 foil, 10mm disks, 0.02mm thickness, half hard |
| GF14187854 | Copper wire reel, 5m, diameter 0.02mm, annealed, 99.99% |
| GF14196067 | Nickel powder, mean particle size (fsss) 3-7 micron, weight 200 g, purity 99.8% |
| GF14200243 | Silver foil, 25mm disks, thickness 0.1mm, annealed, 99.95+% |
| GF14205158 | Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn foil, 100 x 100mm, 0.075mm thickness, annealed, light tight (lt) |
| GF14206047 | Aluminum foam, 33x140mm, thickness 20mm, bulk density 0.2g/cm3, porosity 0.93, aluminum 6101 grade, 98.5% |
| GF14207981 | Silver insulated wire, conductor diameter 0.04 mm, length 2 m, insulation thickness 0.007 mm |
| GF14216385 | Polyethylene Terephthalate (polyester, PET, PETP), sheet, thickness 2 mm, size 300 × 300 mm, condition amorphous |
| GF14220032 | Copper foil, thickness 0.5 mm, 50 mm diameter, high purity 99.99+% |
| GF14220649 | Platinum rod, 50mm, diameter 2.0mm, 99.95% |
| GF14221493 | Polyamide - Nylon 6 (PA 6), film, thickness 0.06 mm, size 200 × 200 mm, natural |
| GF14230640 | Copper-titanium alloy, Cu90Ti10 powder, 45micron max. particle size, atomized, 200g |
| GF14235487 | Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 300 x 300mm, 0.125mm thickness, annealed - condition a, precipitation hardenable |
| GF14243497 | Gold foil, thickness 0.0125 mm, 10 mm diameter, purity 99.9% |
| GF14243655 | Magnesium foil, thickness 0.025 mm, size 100 × 100 mm, purity 99.9% |
| GF14244285 | Aluminum nitride sheet, thickness 0.125 mm, size 25 × 25 mm, condition translucent |
| GF14250181 | Zinc foil, 6mm disks, thickness 0.175mm, as rolled, 99.95+% |
| GF14260306 | Molybdenum foil, thickness 0.03 mm, size 50 × 50 mm, purity 99.9% |
| GF14266346 | Copper lump, 10 mm max. lump size, weight 100 g, high purity 99.99+% |
| GF14269811 | T2 - thermocouple alloy, Ni95(Al+Mn+Si)5 rod, 100mm x 6mm diameter, as drawn |
| GF14273063 | Polyethylene - Low Density (LDPE), rod, diam. 63.5 mm, L 200 mm, natural |
| GF14274176 | Polyethersulfone (PES), granule, 3 mm nominal granule size, weight 2000 g, clear amber |
| GF14275852 | Tantalum foil, 25x25mm, thickness 0.25mm, annealed, 99.9% |
| GF14278125 | Polypropylene (PP), film, thickness 0.5 mm, L 0.5 m, condition copolymer |
| GF14281477 | Aluminum foil, thickness 0.125 mm, length 5 m, purity 99% |
| GF14281613 | Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 5m coil, 0.25mm thickness, annealed |
| GF14281815 | Nickel foil, 25x25mm, thickness 2.0mm, as rolled, 99.99+% |
| GF14287967 | Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn 200mm tube, 3.2mm outside diameter, 0.9mm wall thickness, 1.4mm inside diameter |
| GF14288238 | Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 50m wire, 0.05mm diameter, annealed |
| GF14292817 | Tungsten wire reel, 20m, diameter 0.018mm, hard, clean, 99.95% |
| GF14295270 | Polyvinylfluoride (PVF), film, thickness 0.025 mm, L 0.5 m, coil width 300 mm |
| GF14297430 | Gold mesh, nominal aperture 0.064 mm, size 25 × 25 mm, thickness 0.004 mm |
| GF14307252 | Terbium lump, 25 mm max. lump size, weight 10 g, purity 99% |