aldrich Brand
Displaying 41801-41850 of 68672 results.
| Sigma Cat.No. | Description |
|---|---|
| GF52383887 | Fecralloy - Iron-Chromium, Fe72.8Cr22Al5Y0.1Zr0.1 500mm rod, 12mm diameter |
| GF52384428 | Zirconium-aluminum alloy, Zr90Al10 powder, 45micron max. particle size, alloy pre-cursor, 500g |
| GF52385463 | Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 0.5m coil, 0.015mm thickness, as rolled |
| GF52385799 | Tungsten insulated wire, 1m, conductor diameter 0.015mm, insulation thickness 0.002mm, polyimide insulation, 99.9% |
| GF52389434 | Silver tube, 100mm, outside diameter 3.5mm, inside diameter 3.04mm, wall thickness 0.23mm, as drawn, 99.95+% |
| GF52393697 | Nickel foil, 100x100mm, thickness 1.0mm, as rolled, 99.999% |
| GF52394553 | Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb foil, 300 x 300mm, 0.075mm thickness, annealed, light tight (lt) |
| GF52396713 | T1 - thermocouple alloy, Ni90Cr10 foil, 1m coil, 100mm coil width, 0.25mm thickness, annealed |
| GF52403183 | Iron/Silicon powder, Fe 91%/Si 9%, max. particle size 150 micron, weight 500 g, condition gas atomized |
| GF52404566 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 1m coil, 0.2mm thickness, annealed |
| GF52410956 | Iron- powder, 45micron max. particle size, atomized, 500g |
| GF52417548 | Stainless Steel - AISI 304 alloy, FeCr18Ni10 25 x 25mm, 0.914mm thickness, titanium nitride coating 2-3 microns surface treatment |
| GF52426278 | Invar® - Controlled Expansion Alloy, Fe64Ni36 50m wire, 0.12mm diameter, annealed |
| GF52427303 | Polyamide/Imide (PAI), rod, diam. 12.7 mm, L 50 mm, condition bearing grade |
| GF52433030 | Polyamide - Nylon 6, 6 (PA 6,6), fiber, tex number 3.3, L 100 m, filament diameter 0.019mm |
| GF52438787 | Copper foil, thickness 0.125 mm, 25 mm diameter, high purity 99.99+% |
| GF52445336 | Quartz - fused rod, 2.0 mm diameter, length 500 mm |
| GF52446696 | Silver tube, 100mm, outside diameter 4.65mm, inside diameter 4.23mm, wall thickness 0.21mm, as drawn, 99.95+% |
| GF52447451 | Aluminum-silicon alloy, Al96Si4 powder, 150micron max. particle size, 100g |
| GF52449161 | Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 100 x 100mm, 0.075mm thickness, annealed, light tight (lt) |
| GF52451300 | Copper foil, thickness 0.125 mm, 50 mm diameter, purity 99.9% |
| GF52451647 | Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb foil, 8mm disks, 0.25mm thickness, annealed |
| GF52474237 | Aluminum-magnesium alloy, Al95Mg5 500mm tube, 0.75mm outside diameter, 0.125mm wall thickness, 0.5mm inside diameter, hard |
| GF52480986 | Aluminum-magnesium alloy, Al97Mg3 0.5m foil, 0.03mm thickness, 200mm coil width, as rolled |
| GF52483664 | Copper powder, max. particle size 50 micron, weight 1000 g, purity 99% |
| GF52486780 | Molybdenum foil, 0.2m coil, thickness 0.0125mm, 99.9% |
| GF52491618 | Stainless Steel - AISI 304 alloy, FeCr18Ni10 200mm tube, 1.47mm outside diameter, 0.185mm wall thickness, 1.1mm inside diameter, hard |
| GF52492215 | Nickel foil, 8mm disks, thickness 0.009mm, 99.95% |
| GF52495500 | Aluminum tube, 0.1m coil, as drawn, outside diameter 0.30mm, inside diameter 0.2mm, wall thickness 0.05mm, 99.5% |
| GF52500552 | Copper foil, thickness 0.075 mm, 50 mm diameter, purity 99.9% |
| GF52505771 | Quartz - fused tube, outside diameter 4.0 mm, length 500 mm, wall thickness 1.0 mm |
| GF52506783 | Gold mesh, nominal aperture 0.04 mm, size 25 × 25 mm, thickness 0.006 mm |
| GF52509719 | Copper-gold alloy, Cu95Au5 50g lump, 10mm max. lump size |
| GF52512094 | Aluminum lump, 10 mm max. lump size, weight 50 g, high purity 99.9999% |
| GF52526729 | Vanadium foil, thickness 1.0 mm, 25 mm diameter, purity 99.8% |
| GF52533570 | Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb foil, 300 x 300mm, 0.25mm thickness, annealed |
| GF52543683 | Tungsten-titanium alloy, W95Ti5 powder, 45micron max. particle size, alloy pre-cursor, 50g |
| GF52551222 | Titanium microfoil, disks, 10mm, thinness 0.25μm, specific density 112.6μg/cm2, permanent mylar 3.5μm support, 99.6+% |
| GF52555787 | Lead rod, 5.0 mm diameter, length 200 mm, purity 99.95% |
| GF52557150 | Platinum-rhodium alloy, Pt83Rh17 0.05m wire, 0.5mm diameter, as drawn |
| GF52557554 | Gold wire, 0.25 mm diameter, length 1 m, high purity 99.99+% |
| GF52562493 | Silver insulated wire, 10m, conductor diameter 0.25mm, insulation thickness 0.024mm, PTFE (polytetrafluoroethylene) insulation, 99.99% |
| GF52567016 | Polyphenyleneoxide (PPO ), (ppo (modified), ppe (modified)), rod, diam. 20 mm, L 100 mm, pale gray |
| GF52567140 | Polypropylene (PP), film, thickness 0.004 mm, L 5 m, condition biaxially oriented |
| GF52567678 | Nickel-chromium alloy, Ni80Cr20 50m wire, 0.125mm diameter, hard |
| GF52568006 | Titanium foil, thickness 0.03 mm, size 150 × 150 mm, purity 99.6+% |
| GF52569030 | Platinum microfoil, disks, 10mm, thinness 0.1μm, specific density 120μg/cm2, permanent mylar 3.5μm support, 99.99% |
| GF52570559 | Polytetrafluoroethylene (PTFE), film, thickness 0.1 mm, L 5 m, coil width 610 mm |
| GF52571460 | Polyethylene Naphthalate (PEN), granule, 5 mm nominal granule size, weight 1000 g, condition additive free polymer |
| GF52572034 | Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 foil, 2m coil, 0.025mm thickness, annealed |