Advanced Search

aldrich Brand

Displaying 48401-48450 of 68619 results.
Sigma Cat.No.Description
GF80112800Tantalum-tungsten alloy, Ta90W10
500mm rod, 5.0mm diameter, annealed
GF80116950Polymethylpentene
TPX®, granule, 3 mm nominal granule size, weight 200 g, grade mx002
GF80118828Carbon
rod, 150mm, diameter 10.0mm, graphite, 100%
GF80126197Gold-iron alloy, Au99.93Fe0.07
0.2m wire, 0.025mm diameter, annealed
GF80133588Nitinol alloy, Ni55Ti45
100mm tube, 0.8mm outside diameter, 0.1mm wall thickness, 0.6mm inside diameter, superelastic
GF80135928Polyamide - Nylon 6
(PA 6), rod, diam. 25 mm, L 1000 mm
GF80139438Bismuth
foil, not light tested, 50x50mm, thickness 0.05mm, permanent polyester support, 99.97%
GF80139539Stainless Steel - AISI 304 alloy, FeCr18Ni10
200mm tube, 9.0mm outside diameter, 0.5mm wall thickness, 8mm inside diameter, hard
GF80149507Cobalt
foil, 8mm disks, thickness 0.008mm, 99.9%
GF80151612Monel® alloy 400, Ni65Cu33Fe2
foil, 50mm disks, 0.12mm thickness, annealed
GF80152400Stainless Steel - AISI 316L alloy, FeCr18Ni10Mo3
100mm rod, 16mm diameter
GF80154334Tungsten
wire reel, 25m, diameter 0.15mm, clean, 99.95%
GF80158732Copper
foil, thickness 0.025 mm, length 5 m, coil width 2.5 mm
GF80164964Platinum
foil, not light tested, 100x100mm, thickness 0.005mm, as rolled, 99.95%
GF80175449Tin-silver alloy, Sn96Ag4
20m wire, 1.5mm diameter, as drawn
GF80179410Tungsten
mesh, 50x50mm, nominal aperture 0.15mm, wire diameter 0.02mm, 150 wires/inch, open area 75%, plain weave mesh, 99.95%
GF80180377Tantalum
foil, 4mm disks, thickness 0.006mm, 99.9%
GF80186889Platinum
wire reel, 0.2m, diameter 0.3mm, annealed, may be used as one component of a thermocouple, 99.99%
GF80187453Constantan - resistance alloy, Cu55Ni45
100m wire, 0.125mm diameter, annealed
GF80188634Stainless Steel - AISI 304 alloy, FeCr18Ni10
1000mm tube, 9.0mm outside diameter, 0.5mm wall thickness, 8mm inside diameter, hard
GF80195643Iron
foil, 6mm disks, thickness 0.15mm, hard, 99.5%
GF80198006Aluminum borosilicide
powder, 150 max. part. size (micron), weight 20 g
GF80198062Quartz - fused
rod, 20.0 mm diameter, length 100 mm
GF80199546Molybdenum
rod, 50mm, diameter 15.0mm, centerless ground, 99.9%
GF80201832Brass alloy, Cu63Zn37
foil, 50 x 50mm, 0.025mm thickness, hard, light tight (lt)
GF80202620Havar® - high-strength non-magnetic alloy, Co42.5Cr20Ni13FeWMoMn
foil, 15mm disks, 0.035mm thickness, as rolled
GF80203496Polyphenyleneoxide
(PPO ), (ppo (modified), ppe (modified)), rod, diam. 6 mm, L 500 mm, pale gray
GF80205285Nickel-chromium alloy, Ni80Cr20
50g lump, 10mm max. lump size, pellets
GF80205353Manganese-nickel alloy, Mn88Ni12
foil, 25 x 25mm, 0.02mm thickness, as rolled, light tight (lt)
GF80205948Tin
foil, 50x50mm, thickness 0.25mm, as rolled, 98.8%
GF80208536Cadmium
wire reel, 0.2m, diameter 1.2mm, as drawn, 99.99+%
GF80209425Aluminum
foil, thickness 0.009 mm, size 100 × 100 mm, purity 99%
GF80210988Molybdenum
powder, 350 max. part. size (micron), weight 50 g, purity 99.9+%
GF80216502Iron
wire, 0.05 mm diameter, length 5 m, purity 99.5%
GF80217109Silver
foil, not light tested, 25x25mm, thickness 0.001mm, 99.97%
GF80217929Aluminum-nickel alloy, Al98.5Ni1.5
100mm rod, 8mm diameter
GF80219965Monel® alloy 400, Ni65Cu33Fe2
100mm tube, 19.0mm outside diameter, 1.22mm wall thickness, 16.56mm inside diameter, as drawn
GF80220248Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 15mm disks, 0.125mm thickness, annealed
GF80221643Aluminum
foil, thickness 0.50 mm, size 100 × 100 mm, high purity 99.999%
GF80228156Copper
foil, thickness 0.05 mm, length 10 m, coil width 6 mm
GF80230205Molybdenum high temperature alloy tzm, Mo99Ti0.5Zr0.1
foil, 25 x 25mm, 0.52mm thickness, as rolled
GF80243850Polytetrafluoroethylene
(PTFE), film, thickness 0.025 mm, size 100 × 100 mm
GF80244884Nickel
foil, 100x100mm, thickness 3.2mm, as rolled, 99.99+%
GF80250869Alumina
rod, 10.0 mm diameter, length 50 mm, purity 99%
GF80258159Silver
tube, 50mm, outside diameter 10mm, inside diameter 8mm, wall thickness 1.0mm, as drawn, 99.95+%
GF80260736Copper
foil, thickness 0.025 mm, length 20 m, coil width 2.5 mm
GF80260837Indium
rod, 3.5 mm diameter, length 100 mm, high purity 99.999%
GF80261669Copper
mesh, 260x260mm, nominal aperture 0.2mm, thickness 0.004mm, wire diameter 0.0125mm, 118 wires/inch, open area 88%, electro-formed mesh
GF80267249Polyetheretherketone
(PEEK), film, thickness 0.25 mm, size 150 × 150 mm, transparent pale amber
GF80270849Cobalt
rod, 10 mm diameter, length 100 mm, purity 99.9%

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top