ALDRICH Brand
Displaying 2001-2050 of 67453 results.
| Sigma Cat.No. | Description |
|---|---|
| 180106 | 3,3,3- 97% |
| 180203 | Borane morpholine complex 95% |
| 180211 | Borane tert-butylamine complex powder, 97% |
| 180238 | Borane dimethylamine complex 97% |
| 180246 | 2-Naphthoic acid 98% |
| 180262 | 2- |
| 180343 | trans,trans-2,4-Hexadienal 95% |
| 180378 | 1- 98% |
| 180386 | 2,2,2- 98% |
| 180459 | 5,6,7,8- 98% |
| 180467 | 1,3- 98% |
| 180513 | trans,trans-2,4-Decadienal technical grade, 85% |
| 180548 | 2,4-Heptadienal technical grade, 90% |
| 180629 | Diphenyl diselenide 98% |
| 180637 | 9- 96% |
| 180653 | 2- 98% |
| 180696 | Dimethyl 2- 95% |
| 180769 | Ethyl 4-chloroacetoacetate 95% |
| 180807 | (−)-cis-Myrtanylamine 98% |
| 18086 | 1- ≥98.0% (HPLC) |
| 180912 | Poly(acrylonitrile-co-butadiene) acrylonitrile 37-39 wt. % |
| 180947 | Alginic acid sodium salt powder |
| 180955 | Cellulose acetate average Mn ~30,000 by GPC |
| 180963 | Cellulose acetate butyrate |
| 18104 | Calcium propionate 99.0-100.5% (in dried substance), meets analytical specification of E 282 |
| 181099 | Poly(methyl vinyl ether-alt-maleic acid) average Mw ~1,980,000 by LS, average Mn ~960,000, powder |
| 181110 | Nylon 6 pellets |
| 181145 | Nylon 6/12 pellets, 2 mm |
| 181153 | Nylon 11 pellets, 3 mm |
| 181161 | Nylon 12 pellets |
| 181250 | Polyacenaphthylene average Mw 5,000-10,000, powder |
| 181285 | Poly(acrylic acid) average Mv ~450,000 |
| 181315 | Polyacrylonitrile average Mw 150,000 (Typical) |
| 181358 | Poly(benzyl methacrylate) average Mw ~100,000 by GPC, powder |
| 181366 | Poly(4-bromostyrene) average Mw ~65,000 by GPC, powder |
| 181374 | Polybutadiene, cis average Mw 200,000-300,000 |
| 181404 | Poly(butyl acrylate) solution average Mw ~99,000 by GPC, in toluene |
| 181455 | Polyisobutylene average Mw ~500,000, average Mn ~200,000 by GPC/MALLS, average Mv ~420,000 |
| 181463 | Polyisobutylene average Mw ~1,000,000, average Mn ~600,000 by GPC/MALLS, average Mv ~1,200,000 |
| 181501 | Poly(1,4-butylene adipate) average Mw ~12,000 by GPC |
| 181528 | Poly(butyl methacrylate) inherent viscosity 0.470-0.560 dL/g |
| 181560 | Poly(butyl methacrylate-co-isobutyl methacrylate) average Mw ~354,000 by GPC, powder |
| 181587 | Poly(tert-butyl methacrylate) average Mw ~170,000, crystalline |
| 181625 | Poly(Bisphenol A carbonate) average Mw ~45,000 by GPC |
| 18165 | (R) ≥98.0% (sum of enantiomers, GC) |
| 181781 | Poly(2,6- powder |
| 181803 | Poly(2,6- analytical standard, Mw 30,000 (Typical), Mn 20,000 (Typical) |
| 181889 | Poly(ethyl acrylate) solution average Mw ~95,000 by GPC, in toluene |
| 181919 | Poly(ethylene adipate) average Mw ~10,000 by GPC |
| 181978 | Poly(ethyleneimine) solution average Mn ~60,000 by GPC, average Mw ~750,000 by LS, 50 wt. % in H2O |