ALDRICH Brand
Displaying 28501-28550 of 66743 results.
| Sigma Cat.No. | Description |
|---|---|
| GF03257625 | Tantalum foil, light tested, 25x25mm, thickness 0.009mm, 99.9% |
| GF03260562 | Iron foil, 150x150mm, thickness 1.5mm, as rolled, 99.5% |
| GF03264353 | Polyamide - Nylon 6, 6 (PA 6,6), granule, 3 mm nominal granule size, weight 100 g, grade super-tough |
| GF03272868 | Platinum foil, 4mm disks, thickness 0.125mm, as rolled, 99.95% |
| GF03278280 | Tin-lead-antimony alloy, Sn60Pb39Sb1 foil, 25 x 25mm, 0.006mm thickness, light tight (lt) |
| GF03284748 | Nickel foil, 0.5m coil, thickness 0.03mm, 99.9% |
| GF03298046 | Aluminum foil, thickness 0.075 mm, 15 mm diameter, purity 99% |
| GF03299946 | Polyamide - Nylon 12 (PA 12), rod, diam. 60 mm, L 1000 mm |
| GF03301692 | Tantalum foil, 15mm disks, thickness 0.02mm, 99.9% |
| GF03303874 | Iron foil, not light tested, 50x50mm, thickness 0.006mm, 99.85% |
| GF03303908 | Copper-titanium alloy, Cu70Ti30 powder, 45micron max. particle size, alloy pre-cursor, 20g |
| GF03304516 | Tantalum tube, 200mm, outside diameter 12.7mm, inside diameter 11.7mm, wall thickness 0.5mm, annealed, 99.9% |
| GF03304774 | Aluminium alloy 5754 rod, Al 97%/Mg 3%, 6.35 mm diameter, length 100 mm, condition extruded |
| GF03308802 | Nickel tube, 1000mm, outside diameter 5.9mm, inside diameter 5.65mm, wall thickness 0.125mm, hard, 99.5% |
| GF03309320 | Aluminum foil, thickness 0.20 mm, size 25 × 25 mm, purity 99% |
| GF03328972 | T1 - thermocouple alloy, Ni90Cr10 5m wire, 0.5mm diameter, annealed |
| GF03331268 | Copper tube, 500mm, outside diameter 2.5mm, inside diameter 1.9mm, wall thickness 0.3mm, as drawn, 99.9% |
| GF03332168 | Manganin® - resistance alloy, Cu86Mn12Ni2 insulated wire, 100m length, 0.05mm conductor diameter, 0.004mm insulation thickness, polyester insulation |
| GF03342596 | Platinum-iridium alloy, Pt90Ir10 1m wire, 0.03mm diameter, as drawn |
| GF03344677 | Titanium foil, thickness 0.125 mm, 25 mm diameter, purity 99.6+% |
| GF03346501 | Copper wire reel, 50m, diameter 0.02mm, hard, 99.99+% |
| GF03356489 | Copper-beryllium alloy, Cu98Be2 foil, 15mm disks, 0.125mm thickness, half hard |
| GF03364499 | Nickel rod, 50mm, diameter 5.0mm, 99.99+% |
| GF03368819 | Quartz - fused sheet, thickness 1.0 mm, size 50 × 50 mm, condition polished both sides |
| GF03371352 | Tungsten powder, max. particle size 100 micron, weight 50 g, purity 99.9% |
| GF03376155 | Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 8mm disks, 0.125mm thickness, half hard |
| GF03378652 | Cadmium rod, 100mm, diameter 5.0mm, as drawn, 99.99+% |
| GF03382624 | Iron foil, 100x100mm, thickness 0.5mm, as rolled, 99.99+% |
| GF03383704 | Platinum wire reel, 0.1m, diameter 0.25mm, annealed, may be used as one component of a thermocouple, 99.99% |
| GF03389520 | Copper foil, thickness 0.125 mm, 10 mm diameter, purity 99.9% |
| GF03393851 | Havar® - high-strength non-magnetic alloy, Co42.5Cr20Ni13FeWMoMn foil, 50mm disks, 0.025mm thickness, as rolled |
| GF03396416 | Tungsten Washer, size m4, length 25 pcs, outside diameter 8.0mm |
| GF03399464 | Stainless Steel - AISI 316L alloy, FeCr18Ni10Mo3 500m wire, 0.025mm diameter, annealed |
| GF03400322 | Gilding metal alloy, Cu85Zn15 50m wire, 0.711mm diameter, as drawn |
| GF03402368 | Aluminum foil, thickness 0.125 mm, size 25 × 25 mm, purity 99% |
| GF03408555 | Vanadium wire reel, 0.5m, diameter 0.5mm, as drawn, 99.8% |
| GF03412190 | Polyamide - Nylon 6, 6 (PA 6,6), sheet, thickness 12 mm, size 300 × 300 mm |
| GF03416666 | Monel® alloy 400, Ni65Cu33Fe2 foil, 15mm disks, 0.5mm thickness, annealed |
| GF03422911 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 4mm disks, 0.025mm thickness, annealed |
| GF03427040 | Iron foil, light tested, 100x100mm, thickness 0.05mm, as rolled, 99.99+% |
| GF03428625 | Manganese foil, not light tested, 25x25mm, thickness 0.05mm, permanent polyester support, 98.7% |
| GF03431685 | Aluminum- 20m wire, 0.5mm diameter, as drawn |
| GF03434699 | Gold powder, max. particle size 250 micron, weight 1 g, purity 99.95% |
| GF03435331 | Stainless Steel - AISI 304 alloy, FeCr18Ni10 200mm tube, 2.05mm outside diameter, 0.25mm wall thickness, 1.55mm inside diameter, hard |
| GF03436141 | Praseodymium foil, thickness 0.50 mm, size 25 × 25 mm, purity 99% |
| GF03442744 | Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 foil, 25mm disks, 0.25mm thickness, annealed |
| GF03442812 | Glass Sealing Alloy, Fe54Ni29Co17 100m wire, 0.05mm diameter, as drawn |
| GF03455186 | Polyethylene - Low Density (LDPE), tube, outside diameter 6.4mm, L 2 m, wall thickness 1.1 mm |
| GF03458796 | Zirconium foil, 50mm disks, thickness 0.016mm, 99.2% |
| GF03462375 | Gold foil, thickness 0.007 mm, 8 mm diameter, purity 99.9% |