ALDRICH Brand
Displaying 45801-45850 of 68959 results.
| Sigma Cat.No. | Description |
|---|---|
| GF66039790 | Silver wire reel, 0.2m, diameter 1.0mm, annealed, 99.99% |
| GF66049937 | Lead foil, 75x100mm, thickness 2.7mm, as rolled, 99.95% |
| GF66051424 | Vanadium foil, thickness 0.040 mm, diameter 4 mm, purity 99.8% |
| GF66058612 | Nickel foil, 10mm disks, thickness 0.025mm, 99.9% |
| GF66065452 | Aluminum-magnesium alloy, Al92.1Mg7.9 powder, 63micron max. particle size, atomized, 50g |
| GF66071347 | Molybdenum foil, 10mm disks, thickness 0.006mm, 99.9% |
| GF66072630 | Constantan - resistance alloy, Cu55Ni45 1000m wire, 0.25mm diameter, annealed |
| GF66076229 | Nickel-iron alloy, Ni80Fe20 foil, 100 x 100mm, 1.0mm thickness, as rolled |
| GF66076645 | Aluminum foil, thickness 0.015 mm, diameter 50 mm, purity 99% |
| GF66078771 | Copper wire reel, 5m, diameter 0.5mm, annealed, silver plated, 99.9% |
| GF66083362 | Antimony foil, not light tested, 50x50mm, thickness 0.015mm, permanent polyester support, 95+% |
| GF66084835 | Tin foil, 0.5m coil, thickness 0.06mm, coil width 73mm, as rolled, 99.99+% |
| GF66089188 | Copper foil, thickness 0.0078 mm, size 50 × 50 mm, high purity 99.99+% |
| GF66095219 | Polyvinylidenefluoride (PVDF), film, thickness 0.05 mm, L 0.5 m |
| GF66102061 | Monel® alloy 400, Ni65Cu33Fe2 foil, 25 x 25mm, 0.12mm thickness, annealed |
| GF66108832 | Hastelloy® X alloy, Ni49.5Cr22Fe18Mo9Co1W 10m wire, 1.0mm diameter, annealed |
| GF66110060 | Indium foil, 25mm disks, thickness 0.75mm, as rolled, 100% |
| GF66110329 | Praseodymium rod, 100mm, diameter 6.35mm, cast, 99% |
| GF66111331 | Silver foil, 10mm disks, thickness 1.0mm, as rolled, 99.99+% |
| GF66114918 | Molybdenum wire, 0.635 mm diameter, length 1 m, purity 99.95% |
| GF66115942 | Polyetheretherketone (PEEK), tube, outside diameter 3.2mm, L 1000 mm, wall thickness 0.6 mm |
| GF66116314 | Tin foil, 6mm disks, thickness 0.15mm, as rolled, 99.99+% |
| GF66117304 | Polyamide - Nylon 6, 6 (PA 6,6), fiber, tex number 3.3, L 500 m, filament diameter 0.019mm |
| GF66119058 | Polyimide (PI), tube, outside diameter 3.0mm, L 500 mm, wall thickness 0.03 mm |
| GF66120533 | Platinum foil, not light tested, 25x25mm, thickness 0.002mm, as rolled, 99.95% |
| GF66125471 | Cellulose Acetate (CA), film, thickness 0.1 mm, L 1 m, natural |
| GF66135641 | Gold microleaf disks, 10mm, thinness 1.0μm, specific density 1932μg/cm2, removable support, 99.99+% |
| GF66145260 | Tantalum foil, 100x100mm, thickness 0.5mm, annealed, polished on both sides, 99.9% |
| GF66148577 | Platinum-iridium alloy, Pt70Ir30 2m wire, 0.25mm diameter, as drawn |
| GF66149916 | Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 50 x 50mm, 0.125mm thickness, annealed |
| GF66165183 | Polyetheretherketone (PEEK), fiber, tex number 23, L 2 m, filament diameter 0.034mm |
| GF66169020 | Iron foil, not light tested, 50x50mm, thickness 0.001mm, 99.85% |
| GF66169536 | Copper foil, thickness 0.1 mm, length 5 m, coil width 0.75 mm |
| GF66169985 | Copper-beryllium alloy, Cu98Be2 10m wire, 1.63mm diameter, hard |
| GF66172912 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 25mm disks, 0.075mm thickness, annealed |
| GF66180034 | Titanium tube, 500mm, outside diameter 1.05mm, inside diameter 0.75mm, wall thickness 0.15mm, annealed, 99.6+% |
| GF66188829 | Nickel foil, thickness 0.7 mm, diameter 4 mm, purity 99% |
| GF66191610 | T1 - thermocouple alloy, Ni90Cr10 500m wire, 0.25mm diameter, annealed |
| GF66194589 | Copper-beryllium alloy, Cu98Be2 foil, 0.5m coil, 0.125mm thickness, half hard |
| GF66198897 | Polyvinylidenefluoride (PVDF), film, thickness 0.1 mm, L 1 m |
| GF66200598 | Copper foil, thickness 0.1 mm, diameter 50 mm, purity 99.9% |
| GF66210218 | Copper-beryllium alloy, Cu98Be2 foil, 100 x 100mm, 0.02mm thickness, as rolled, light tight (lt) |
| GF66225090 | Aluminum nitride sheet, thickness 0.64 mm, size 50 × 50 mm, condition translucent |
| GF66233538 | Rhenium foil, thickness 0.25 mm, size 25 × 25 mm, purity 99.99% |
| GF66243168 | Polyvinylidenefluoride (PVDF), film, thickness 0.05 mm, L 2 m |
| GF66243696 | Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti 100mm rod, 6.35mm diameter |
| GF66249221 | Manganese-nickel alloy, Mn88Ni12 foil, 50 x 50mm, 0.0125mm thickness, as rolled, not light tested (nlt) |
| GF66250256 | Nickel rod, 200mm, diameter 10.0mm, 99.99+% |
| GF66261719 | Cadmium foil, 8mm disks, thickness 0.01mm, 99.7+% |
| GF66263429 | Polytetrafluoroethylene (PTFE), tube, outside diameter 14mm, L 1000 mm, wall thickness 0.07 mm |