ALDRICH Brand
Displaying 49801-49850 of 68672 results.
| Sigma Cat.No. | Description |
|---|---|
| GF84072540 | Zinc foil, 8mm disks, thickness 0.25mm, as rolled, 99.95+% |
| GF84076229 | Platinum-rhodium alloy, Pt87Rh13 0.1m wire, 0.05mm diameter, annealed |
| GF84077725 | Tungsten-copper alloy, W60Cu40 foil, 50 x 75mm, 1.0mm thickness |
| GF84080763 | Polyphenylenesulfide (PPS), film, thickness 0.16 mm, L 1 m, natural |
| GF84081203 | Stainless Steel - AISI 316L alloy, FeCr18Ni10Mo3 foil, 6mm disks, 0.05mm thickness, annealed |
| GF84088671 | Tantalum foil, 8mm disks, thickness 0.01mm, 99.9% |
| GF84097794 | Cadmium wire reel, 0.1m, diameter 0.25mm, hard, 99.99+% |
| GF84104153 | Alumina rod, length 100 mm, 10.0 mm diameter, purity 99% |
| GF84104658 | Iron foil, 300x300mm, thickness 0.5mm, hard, 99.5% |
| GF84105301 | Polyamide - Nylon 6, 6 (PA 6,6), rod, diam. 25 mm, L 500 mm, natural |
| GF84106447 | Polyvinylchloride - Unplasticized (UPVC), film, thickness 0.2 mm, L 10 m, clear |
| GF84111230 | Nickel-chromium alloy, Ni80Cr20 5m wire, 0.5mm diameter, hard |
| GF84118899 | Polytetrafluoroethylene Coated Glass Fabric (PTFE 75 / GLASS 25), fabric, weight.m-2-145g, size 500 × 500 mm, thickness 0.08 mm |
| GF84130792 | Cobalt foil, light tested, 25x25mm, thickness 0.025mm, 99.9% |
| GF84138318 | Silicon carbide - reaction bonded sheet, thickness 5.0 mm, size 50 × 50 mm, condition ground |
| GF84139173 | Hafnium foil, 50x50mm, thickness 0.5mm, annealed, 97% |
| GF84140603 | Hafnium wire reel, 1m, diameter 1.0mm, as drawn, 97% |
| GF84141952 | Polymethylpentene TPX®, film, thickness 0.09 mm, diam. 50 mm |
| GF84145462 | Aluminum microfoil, disks, 25mm, thinness 1.0μm, specific density 269.9μg/cm2, permanent mylar 3.5μm support, 99.999% |
| GF84148397 | Nickel foil, 1m coil, thickness 0.075mm, annealed, 99% |
| GF84151504 | Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 300 x 300mm, 0.015mm thickness, as rolled, light tight (lt) |
| GF84152000 | Polyamide/Imide (PAI), rod, diam. 6.7 mm, L 200 mm, brown |
| GF84152156 | Iron foil, 10mm disks, thickness 0.005mm, 99.85% |
| GF84155508 | Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 2m coil, 25mm coil width, 0.15mm thickness, as rolled - condition c, precipitation hardenable |
| GF84156262 | Copper tube, 500mm, outside diameter 1.75mm, inside diameter 0.33mm, wall thickness 0.71mm, as drawn, 99.9% |
| GF84157140 | Copper-beryllium alloy, Cu98Be2 foil, 50mm disks, 0.5mm thickness, half hard |
| GF84157690 | Aluminum foil, thickness 0.060 mm, size 100 × 100 mm, purity 99% |
| GF84158376 | Aluminum-magnesium alloy, Al97Mg3 foil, 2m coil, 0.06mm thickness, as rolled |
| GF84167455 | Molybdenum-titanium alloy, Mo80Ti20 powder, 150micron max. particle size, alloy pre-cursor, 200g |
| GF84172934 | Copper foil, thickness 0.1 mm, length 10 m, coil width 1.5 mm |
| GF84174071 | Platinum-iridium alloy, Pt90Ir10 2m insulated wire, 0.05mm conductor diameter, 0.009mm insulation thickness, ptfe (polytetrafluoroethylene) insulation, 99.999% |
| GF84184151 | Cadmium wire reel, 0.1m, diameter 0.5mm, hard, 99.95+% |
| GF84185871 | Stainless Steel - AISI 302 alloy, FeCr18Ni8 foil, 2m coil, 0.125mm thickness, hard |
| GF84205931 | Polyethylene - High Density (HDPE), film, thickness 0.01 mm, size 300 × 300 mm |
| GF84216641 | Stainless steel - AISI 316l rod, Fe/Cr18%/Ni10%/Mo 3%, 5.0 mm diameter, length 1000 mm |
| GF84217978 | Silver wire reel, 1m, diameter 0.015mm, annealed, 99.99% |
| GF84228048 | Copper foil, thickness 0.0025 mm, size 50 × 50 mm, purity 99.9% |
| GF84232403 | Aluminum foil, thickness 0.060 mm, diameter 25 mm, purity 99% |
| GF84233976 | Tantalum wire reel, 10m, diameter 0.125mm, annealed, 99.9% |
| GF84235192 | Palladium foil, 4mm disks, thickness 0.25mm, as rolled, 99.95% |
| GF84251459 | Nickel wire, 1.0 mm diameter, length 1 m, purity 99% |
| GF84269773 | Waspaloy - heat resisting alloy, Ni58Cr19Co14MoTiAlFe foil, 25 x 25mm, 0.25mm thickness, annealed |
| GF84279101 | Gold foil, thickness 0.250 mm, size 25 × 25 mm, purity 99.95% |
| GF84280462 | Glass Sealing Alloy, Fe54Ni29Co17 100m wire, 0.25mm diameter, as drawn |
| GF84281935 | Copper tube, 100mm, outside diameter 0.25mm, inside diameter 0.05mm, wall thickness 0.1mm, as drawn, 99.9% |
| GF84283791 | Copper foil, thickness 0.1 mm, length 0.5 m, high purity 99.99+% |
| GF84288550 | Stainless steel - AISI 302 foil, thickness 0.025 mm, Fe/Cr18%/Ni 8%, diameter 15 mm, temper hard |
| GF84290317 | Cupric oxide powder, 75 max. part. size (micron), weight 200 g |
| GF84292094 | Manganin® - resistance alloy, Cu86Mn12Ni2 500m wire, 0.25mm diameter, annealed |
| GF84292364 | Nickel wire reel, 2m, diameter 0.75mm, as drawn, 99.99+% |