ALDRICH Brand
Displaying 49901-49950 of 67453 results.
| Sigma Cat.No. | Description |
|---|---|
| GF90896293 | Tin rod, 1000mm, diameter 6.0mm, 99.999+% |
| GF90897979 | Phosphor bronze alloy, Cu94Sn6 20m wire, 1.0mm diameter, as drawn |
| GF90902268 | Iron- foil, 15mm disks, 0.008mm thickness, as rolled |
| GF90904204 | Aluminum foil, thickness 0.030 mm, size 25 × 25 mm, purity 99% |
| GF90905474 | Copper lump, 5 mm max. lump size, weight 50 g, high purity 99.99+% |
| GF90909388 | Tungsten wire reel, 10m, diameter 0.0075mm, hard, 99.95% |
| GF90912135 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 4mm disks, 0.05mm thickness, annealed |
| GF90912494 | Vanadium foil, thickness 0.015 mm, diameter 4 mm, purity 99.8% |
| GF90913675 | Tungsten-rhenium alloy, W75Re25 0.05m wire, 0.5mm diameter, annealed |
| GF90913855 | Alumina/Silica/Boria fiber, Al2O3 70%/SiO2 28%/B2O3 2%, tex number 110, length 20 m, filament diameter 0.011mm |
| GF90916364 | Polyethylene - Low Density (LDPE), film, thickness 0.03 mm, L 1 m |
| GF90916386 | Copper-beryllium alloy, Cu98Be2 foil, 50mm disks, 0.02mm thickness, half hard |
| GF90918759 | Brass alloy, Cu63Zn37 foil, 50mm disks, 150mm coil width, 0.25mm thickness, half hard |
| GF90919222 | Polyamide - Nylon 6 (PA 6), sheet, thickness 10 mm, size 100 × 100 mm |
| GF90920505 | Nickel foil, 15mm disks, thickness 0.009mm, 99.95% |
| GF90921023 | Palladium foil, 10mm disks, thickness 0.075mm, as rolled, 99.95% |
| GF90922170 | Manganin® - resistance alloy, Cu86Mn12Ni2 insulated wire, 5m length, 0.1mm conductor diameter, 0.005mm insulation thickness, polyimide insulation |
| GF90925735 | Copper - O.F.H.C. foil, 1m coil, thickness 0.20mm, hard, 99.95+% |
| GF90928121 | Brass alloy, Cu63Zn37 foil, 25 x 25mm size, 150mm coil width, 0.125mm thickness, half hard |
| GF90929199 | Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 25 x 25mm, 0.125mm thickness, annealed |
| GF90929841 | Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn rod, 100mm x 30mm diameter |
| GF90932823 | Nickel rod, 100mm, diameter 6.35mm, 99% |
| GF90933431 | Nickel foil, 50mm disks, thickness 0.075mm, as rolled, 99.98% |
| GF90939651 | Aluminum/Magnesium foil, Al97%/Mg 3%, thickness 0.50 mm, diameter 10 mm, temper as rolled |
| GF90944680 | Polyethylene Terephthalate (polyester, PET, PETP), metallized film, thickness 0.036 mm, diam. 25 mm, ohms/square >2500 |
| GF90946222 | Copper foil, thickness 0.15 mm, diameter 50 mm, high purity 99.99+% |
| GF90946255 | Polyamide - Nylon 6, 6 (PA 6,6), rod, diam. 100 mm, L 100 mm |
| GF90951004 | Nickel-vanadium alloy, Ni93V7 50g lump, 10mm max. lump size, pellets |
| GF90952858 | Molybdenum foil, 10mm disks, thickness 0.20mm, annealed, 99.9% |
| GF90953938 | Copper foil, length 1 m, thickness 0.012 mm, purity 99.99+% |
| GF90958023 | Polyethylene - Low Density (LDPE), film, thickness 0.03 mm, size 300 × 300 mm |
| GF90963928 | Titanium rod, 25mm, diameter 50mm, 99.99+% |
| GF90975516 | Silver foil, 25x25mm, thickness 0.15mm, as rolled, 99.95+% |
| GF90976809 | Nickel- 500mm tube, 15mm outside diameter, 0.4mm wall thickness, 14.2mm inside diameter, as drawn |
| GF90978485 | Polyimide (PI), tube, outside diameter 0.168mm, L 100 mm, wall thickness 0.023 mm |
| GF90978553 | Cadmium foil, 4mm disks, thickness 1.0mm, as rolled, 99.95% |
| GF90985810 | Nickel-boron alloy, Ni85B15 powder, 150micron max. particle size, alloy pre-cursor, 50g |
| GF91003812 | Polyethylene Naphthalate (PEN), film, thickness 0.012 mm, size 360 × 360 mm, condition biaxially oriented |
| GF91009054 | Havar® - high-strength non-magnetic alloy, Co42.5Cr20Ni13FeWMoMn foil, 150 x 150mm, 0.025mm thickness, as rolled, light tight (lt) |
| GF91010854 | Aluminum alloy 3003 honeycomb, thickness 20 mm, Al98%/Mn 1%/Fe 0.5%/Si 0.5%, size 600 × 600 mm, cell size 6.35 mm |
| GF91017479 | Iron foil, light tested, 100x100mm, thickness 0.020mm, 99.85% |
| GF91018874 | Iron foil, 25x25mm, thickness 2.0mm, as rolled, 99.95% |
| GF91019426 | Silver foil, 6mm disks, thickness 0.004mm, 99.97% |
| GF91026862 | Copper - O.F.H.C. foil, 15mm disks, thickness 0.25mm, half hard, 99.95+% |
| GF91027436 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 10mm disks, 0.1mm thickness, annealed |
| GF91028875 | Nickel-iron alloy, Ni52Fe48 200mm tube, 4.5mm outside diameter, 0.07mm wall thickness, 4.36mm inside diameter |
| GF91030306 | Nickel foil, 6mm disks, thickness 0.25mm, annealed, 99% |
| GF91033196 | Tungsten-rhenium alloy, W75Re25 1m wire, 0.075mm diameter, annealed |
| GF91039383 | Silver foil, 4mm disks, thickness 0.25mm, as rolled, 99.99+% |
| GF91047539 | Tin rod, 500mm, diameter 5.0mm, extruded, 99.75% |