Carbopack™ Adsorbent
SUPELCO/10437-U - matrix Carbopack™ X, 60-80 mesh, bottle of 10 g
Synonym: carbon adsorbent, SII, 80-100 mesh
EC Number: 215-609-9
Product Type: Equipment/Book
| density | ~0.44 g/mL (free fall density) |
| form | granular |
| matrix | Carbopack™ X |
| matrix active group | carbon |
| packaging | bottle of 10 g |
| particle size | 60-80 mesh |
| pore size | ~0 cm3/g macroporosity |
| ~0 cm3/g microporosity | |
| ~0.62 cm3/g mesoporosity | |
| ~100 Å pore diameter | |
| product line | Carbopack™ |
| Quality Level | 100  |
| separation technique | reversed phase |
| surface area | ~240 m2/g |
| technique(s) | LPLC: suitable |
| Application: | Carbotrap X has a very high specific surface area and was used for the recovery of low boiling hydrocarbons like 1,3-butadiene and isoprene. |
| General description: | A graphitized carbon black (GCB) can be non-porous or porous. The graphitization process results in a highly pure surface with great adsorption and desorption (if required) properties. Surface interactions depend solely on dispersion (London) forces. These particles are: • Granular • Friable • Used for molecules with an analyte size relative to C3-C20+ n-alkanes • Hydrophobic (can be used in high humidity environments) Generally, GCB adsorbents offer weaker relative adsorptive strength compared to carbon molecular sieve (CMS) adsorbents, and similar relative adsorptive strength compared to spherical graphitized polymer carbon (SGPC) adsorbents. Our Carbopack products are a type of GCB adsorbent. • Particles are 40 mesh and smaller • Use 40/60 mesh to prevent channeling (if observed with a 20/40 mesh Carbotrap® adsorbent) • Use smaller mesh (60/80, 80/100, etc.) for all other applications • Use the smallest particle size available as long as the application can handle the pressure drop For more information about any of our specialty carbon adsorbents, please visit sigma-aldrich.com/carbon |
| General description: | Carbotrap®/Carbopack™ adsorbent can withstand high bake-out temperature without losing the mechanical and chemical integrity. It has a high affinity for isoprene and does not retain significant amounts of water. Furthermore it has a tendency to pulverize if it is packed too tightly. |
| Legal Information: | Carbopack is a trademark of Merck KGaA, Darmstadt, Germany |
| Legal Information: | Carbotrap is a registered trademark of Merck KGaA, Darmstadt, Germany |
| Hazard Codes | Xn |
| Risk Statements | 40 |
| Safety Statements | 36/37 |
| RIDADR | NONH for all modes of transport |
| WGK Germany | nwg |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| Density | ~0.44 g/mL (free fall density) |
| UNSPSC | 23201100 |