Metal Packed GC Column (General Configuration)
SUPELCO/12437 - phase none, matrix 80/100 Porapak Q support, L × O.D. × I.D. 6.0 ft (1.8 m) × 1/8 in. × 2.1 mm
Product Type: Equipment/Book
| column type | packed GC |
| compatibility | for use with General Configuration |
| L × O.D. × I.D. | 6.0 ft (1.8 m) × 1/8 in. × 2.1 mm |
| material | stainless steel column |
| matrix | 80/100 Porapak Q support |
| matrix active group | none phase |
| parameter | 0-250 °C temperature (isothermal or programmed) |
| Quality Level | 100  |
| technique(s) | gas chromatography (GC): suitable |
| Application: | Porapak Q packed in a stainless steel GC column maybe used for oxidation reduction experiments for designing of appropriate surface sites for ruthenium-ceria catalysts supported on graphite by controlled preparation method. |
| General description: | An economical metal column should be used for less demanding applications where the inertness of glass is not required. This column is of a general configuration, and can be carefully bent to fit most instruments. |
| General description: | Packed column made up of stainless steel are basically employed when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and n-hexane in order to remove any corrosion products and traces of lubricating agents. |
| WGK Germany | WGK 3 |
| UNSPSC | 41115710 |