Metal Packed GC Column (fits Agilent, Configuration "A")
SUPELCO/12554 - phase none, matrix 60/80 Tenax TA support, L × O.D. × I.D. 6.0 ft (1.8 m) × 1/8 in. × 2.1 mm
Product Type: Equipment/Book
| column type | packed GC |
| compatibility | for use with Agilent Configuration A |
| L × O.D. × I.D. | 6.0 ft (1.8 m) × 1/8 in. × 2.1 mm |
| manufacturer/tradename | Agilent |
| material | stainless steel column |
| matrix | 60/80 Tenax TA support |
| matrix active group | none phase |
| parameter | 0-350 °C temperature (isothermal or programmed) |
| Quality Level | 100  |
| technique(s) | gas chromatography (GC): suitable |
| General description: | An economical metal column should be used for less demanding applications where the inertness of glass is not required. This column fits Agilent 5880, 5890, 6890, 7820, and 7890 (configuration A, on-column injection, all detectors except TCD). |
| General description: | Packed column made up of stainless steel are basically employed when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and n-hexane in order to remove any corrosion products and traces of lubricating agents. |
| RIDADR | NONH for all modes of transport |
| WGK Germany | WGK 3 |
| UNSPSC | 41115710 |