Metal Packed GC Column (General Configuration)
SUPELCO/12592 - phase 3% SP®-1500, matrix 80/120 Carbopack B support, L × O.D. × I.D. 10.0 ft (3.0 m) × 1/8 in. × 2.1 mm
Product Type: Equipment/Book
| column type | packed GC |
| compatibility | for use with General Configuration |
| L × O.D. × I.D. | 10.0 ft (3.0 m) × 1/8 in. × 2.1 mm |
| material | stainless steel column |
| matrix | 80/120 Carbopack B support |
| matrix active group | 3% SP®-1500 phase |
| parameter | 0-230 °C temperature (isothermal or programmed) |
| Quality Level | 100  |
| technique(s) | gas chromatography (GC): suitable |
| Application: | Carbopack B SP-1500 packed gas chromatographic column maybe used for the analysis of toluene in order to study the activity and three dimensional distribution of toluene degrading Pseudomonas putida in a multispecies biofilm assessed by quantitative in situ hybridization and scanning confocal laser microscopy. |
| General description: | An economical metal column should be used for less demanding applications where the inertness of glass is not required. This column is of a general configuration, and can be carefully bent to fit most instruments. |
| General description: | Packed column made up of stainless steel are basically employed when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and n-hexane in order to remove any corrosion products and traces of lubricating agents. |
| Legal Information: | SP is a registered trademark of Sigma-Aldrich Co. LLC |
| RIDADR | NONH for all modes of transport |
| WGK Germany | nwg |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| UNSPSC | 41115710 |