Metal Packed GC Column (General Configuration)
SUPELCO/12873 - phase 20% TCEP, matrix 80/100 Chromosorb P AW support, L × O.D. × I.D. 1.8 ft (0.55 m) × 1/16 in. × 0.75 mm
Product Type: Equipment/Book
| agency | ASTM® D4815 |
| column type | packed GC |
| compatibility | for use with General Configuration |
| L × O.D. × I.D. | 1.8 ft (0.55 m) × 1/16 in. × 0.75 mm |
| manufacturer/tradename | Agilent |
| material | stainless steel column |
| matrix | 80/100 Chromosorb P AW support |
| matrix active group | 20% TCEP phase |
| parameter | 0-175 °C temperature (isothermal or programmed) |
| Quality Level | 100  |
| technique(s) | gas chromatography (GC): suitable |
| Application: | Aromatics/aliphatics |
| General description: | An economical metal column should be used for less demanding applications where the inertness of glass is not required. This column is of a general configuration, and can be carefully bent to fit most instruments. |
| General description: | Packed column made up of stainless steel are basically used when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and n-hexane in order to remove any corrosion products and traces of lubricating agents. |
| Legal Information: | ASTM is a registered trademark of American Society for Testing and Materials |
| Symbol |  GHS08 |
| Signal word | Danger |
| Hazard statements | H372 |
| Precautionary statements | P260 - P264 - P270 - P314 - P501 |
| RIDADR | NONH for all modes of transport |
| WGK Germany | WGK 2 |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| UNSPSC | 41115710 |