Empore™ 96-Well Filter Plate
SUPELCO/66878-U - Empty, well volume 1.2 mL, pk of 1
Synonym: Empore™ SPE 96-well Plate
Product Type: Equipment/Book
Empore 96-well Filter Plate
| bed volume | 18 μL |
| filter diam. | 5.5 mm |
| manufacturer/tradename | CDS Analytical DI-1000-1042-7 |
| material | polypropylene filter (graded density) |
| membrane avg. diam. | 5.5 mm |
| membrane thickness | 0.75 mm |
| packaging | pk of 1 |
| pore size | ≥10 μm retention, 98% retention |
| Quality Level | 100  |
| technique(s) | solid phase extraction (SPE): suitable |
| well volume | 1.2 mL |
| Disclaimer: | CDS Analytical LLC recently acquired the rights to Empore products from 3M Purification Inc. For an interim phase, you may receive products packaged with either manfacturer′s branding. |
| Features and Benefits: | • Reduced elution volume (≤ 100 μL) allows for direct inject procedured or reduced eluate evaporation times • Allows for faster flow-rates without risk of recovery and reproducibility loss • Proprietary pre-filter reduces risk of clogging • Luer tip collar eliminates potential cross-contamination |
| General description: | Consists of a proprietary graded density polypropylene depth filter. The plate provides an excellent media for trapping visible particulates from samples in a 96-well format, while maintaining excellent flow characteristics. Ideal for removing denatured protein particulates from biological plasma after protein precipitation. Compatible with Empore 96-well Vacuum Manifold (Cat. No. 66879-U). |
| General description: | Empore membrane SPE technology comprises of SPE particles tightly enmeshed within a network of inert PTFE fibrils (90% SPE particles : 10% PTFE, by weight). The SPE-membrane fabrication process results in a highly dense and uniform extraction medium that offers distinct advantages over traditional sorbent/packed-bed SPE products. Empore SPE technology provides a denser, more uniform extraction bed than traditional packed bed products allowing for smaller bed weights, shorter analyte to pore diffusion paths, and more efficient extractions. The Empore 96-well line is ideal for high throughput SPE allowing users to process up to 96 samples in parallel. The unique Empore technology comprises of a series of polypropylene (PP) pre-filters that are layed on top of the SPE disk. The PP pre-filter acts as depth filter that provides faster flow-rates and reduces the risk of clogging. Save Time & Money: • Reduced SPE Bed Mass = Reduced SPE Solvent & Elution Volumes • Minimize SPE eluate evaporation time • Potentially allows for direct injection of the SPE eluate • Dense & Uniform Extraction Medium = No SPE Channeling and Voiding • Efficient mass-transfer kinetics allow for faster flow rates • Eliminate SPE fines improving column and instrument life |
| Legal Information: | Empore is a trademark of CDS Analytical |
| Suitability: | Note: Empore 96-well SPE products are NOT compatible with Supelco PlatePrep vacuum manifolds (Cat. No. 57192-U and 575650-U). Empore 96-well vacuum manifold (Cat. No. 66879-U) is recommended for use with Empore 96-well products. |
| Suitability: | Note: Empore 96-well SPE products are NOT compatible with Supelco PlatePrep vacuum manifolds (Cat. No. 57192-U and 575650-U). Empore 96-well vacuum manifold (Cat. No. 66879-U) is recommended for use with Empore 96-well products. |
| RIDADR | NONH for all modes of transport |
| WGK Germany | WGK 3 |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| UNSPSC | 13111000 |