TSKgel® GMHHR-H(S) HT HPLC Column
SUPELCO/818393 - phase polystyrene-divinylbenzene, L × I.D. 30 cm × 7.8 mm, 13 μm particle size
Synonym: TSKgel® GPC Columns for Applications up to 140° C
Product Type: Equipment/Book
| agency | suitable for USP L21 |
| L × I.D. | 30 cm × 7.8 mm |
| manufacturer/tradename | Tosoh 18393 |
| material | stainless steel hardware |
| matrix | polymer particle platform |
| matrix active group | polystyrene-divinylbenzen |
| parameter | 140 °C temperature |
| 2.5 mL/min flow rate | |
| 20 bar max. pressure | |
| particle size | 13 μm |
| pore size | mixed |
| product line | TSKgel® |
| separation technique | size exclusion (SEC) |
| technique(s) | HPLC: suitable |
| General description: | The issue of shearing that occurs with the analysis of ultra-high molar mass polymers is overcome by the TSKgel GMHhr-H(S) HT column. The (S) is a reference to this shearing effect. |
| General description: | TSKgel HT (High Temperature) columns are for the analysis of organic-soluble polymers at temperatures up to 140°C and are shipped in o-dichlorobenzene (ODCB), which can be exchanged for 1-chloronaphthalene and trichlorobenzene. The TSKgel mixed bed columns are packed with particles of different pore sizes that are blended to provide an extended linear calibration curve. Mixed bed columns are used when a broad range of polymer molar masses is expected in the sample. Shearing, which can be observed when analyzing ultra-high molar mass polymers on columns packed with 5 micron or smaller particles, can be overcome by using the TSKgel GMHhr-H(S) HT column, which is packed with 13 micron particles. The (S) is a reference to this shearing effect. |
| Legal Information: | TSKgel is a registered trademark of Tosoh Corporation |
| Physical form: | ODCB can be exchanged by 1-chloronaphthalene and trichlorobenzene. |
| Recommended products: | Discover LiChropur reagents ideal for HPLC  or LC-MS analysis |
| UNSPSC | 41115711 |