TSKgel® ODS-80Ts QA HPLC Column
SUPELCO/818769 - phase C18 (octadecyl), L × I.D. 25 cm × 2 mm, 5 μm particle size
Product Type: Equipment/Book
| agency | suitable for USP L1 |
| extent of labeling | 15% Carbon, monolayer, endcapped |
| L × I.D. | 25 cm × 2 mm |
| manufacturer/tradename | Tosoh 18769 |
| material | stainless steel |
| matrix | spherical silica |
| matrix active group | C18 (octadecyl) phase |
| operating pH | 2.0-7.5 |
| parameter | 0.22 mL/min flow rate |
| 10-100% organic solvent | |
| 10-50 °C temperature | |
| 300 bar max. pressure | |
| particle size | 5 μm |
| product line | TSKgel® |
| separation technique | reversed phase |
| technique(s) | HPLC: suitable |
| General description: | TSKgel® ODS-80Ts QA columns were developed specifically for use by QA/QC departments that require highly reproducible separations. These columns are prepared from the same endcapped C18 packing material as TSKgel ODS-80Ts columns, but with narrower manufacturing specifications to meet the demand for high reproducibility.The variation between different lots of TSKgel ODS-80Ts QA packing material is minimized by selecting batches of TSKgel ODS-80Ts that fall within a very narrow range of specifications. In addition, each column must pass demanding specifications for efficiency (N) and peak asymmetry, as are spelled out in the Operating Conditions and Specifications sheet. The end result is TSKgel ODS-80Ts QA columns that exhibit an unparalleled level of reproducibility for retention, selectivity (k´), efficiency (N), and peak symmetry. |
| Legal Information: | TSKgel is a registered trademark of Tosoh Corporation |
| Physical form: | Shipped in 70% methanol - 30% water. |
| Recommended products: | Discover LiChropur reagents ideal for HPLC  or LC-MS analysis |
| UNSPSC | 41115711 |